• 제목/요약/키워드: Condition Monitoring System

검색결과 1,226건 처리시간 0.03초

On-site 방식 빗물관리를 위한 건축물 지붕면의 유출특성 경험식 수립 (An Experimental Runoff Formula in Building Roof Area for On-site Rainwater Management)

  • 김영진;한무영;김용하;문정수
    • 한국수자원학회논문집
    • /
    • 제42권2호
    • /
    • pp.171-176
    • /
    • 2009
  • 본 연구는 현지(on-site) 빗물관리에 필요한 지붕면 누적유출용적 예측을 위한 경험식을 제안하였다. 건축물 지붕면은 좁은 면적으로 인해 기존 유출해석 기법의 적용이 어려운 것으로 파악되었으며, 지붕면 유출조건을 고려한 강우깊이(D)-누적유출용적(V)간의 이론적 관계식을 수립하였다. 2005년부터 2007년까지 2년간 실제 강우량과 지붕면의 유출용적을 측정하여 이론적 관계식으로 계산된 누적유출용적과 실측 누적유출용적 자료를 비교 검토하였다. 실측자료의 분석결과를 바탕으로 시간별 강우깊이 변화에 따른 누적유출용적을 예측할 수 있는 경험적 유출식을 얻었다. 본 경험식으로 강우관측 자료 또는 강우주상도와 지붕면의 면적으로부터 간편하게 실제에 가까운 누적유출용적의 시간별 변화를 예측할 수 있으며, 이 결과는 각종 빗물관리시설의 용량 결정은 물론, 빗물관리시설 통해 지붕면에서 도시배수관으로 유입되는 유량 변화 예측에도 활용이 가능할 것이다.

한의 입원환자분류체계의 중증도 분류방안 연구 (A Study on the Severity Classification in the KDRG-KM (Korean Diagnosis-Related Groups - Korean Medicine))

  • 류지선;김동수;이병욱;김창훈;임병묵
    • 대한한의학회지
    • /
    • 제38권3호
    • /
    • pp.185-196
    • /
    • 2017
  • Backgrounds: Inpatient Classification System for Korean Medicine (KDRG-KM) was developed and has been applied for monitoring the costs of KM hospitals. Yet severity of patients' condition is not applied in the KDRG-KM. Objectives: This study aimed to develop the severity classification methods for KDRG-KM and assessed the explanation powers of severity adjusted KDRG-KM. Methods: Clinical experts panel was organized based on the recommendations from 12 clinical societies of Korean Medicine. Two expert panel workshops were held to develop the severity classification options, and the Delphi survey was performed to measure CCL(Complexity and Comorbidity Level) scores. Explanation powers were calculated using the inpatient EDI claim data issued by hospitals and clinics in 2012. Results: Two options for severity classification were deduced based on the severity classification principle in the domestic and foreign DRG systems. The option one is to classify severity groups using CCL and PCCL(Patient Clinical Complexity Level) scores, and the option two is to form a severity group with patients who belonged principal diagnosis-secondary diagnosis combinations which prolonged length of stay. All two options enhanced explanation powers less than 1%. For third option, patients who received certain treatments for severe conditions were grouped into severity group. The treatment expense of the severity group was significantly higher than that of other patients groups. Conclusions: Applying the severity classifications using principal diagnosis and secondary diagnoses can advance the KDRG-KM for genuine KM hospitalization. More practically, including patients with procedures for severe conditions in a severity group needs to be considered.

도시정체성 확립을 위한 도시재생의 유형 및 계획특성 분석 (Analyses on Type and Characteristics of Urban Regeneration for Establishment of Urban Identity)

  • 이주형;서의권;임종현
    • KIEAE Journal
    • /
    • 제9권5호
    • /
    • pp.85-96
    • /
    • 2009
  • This study analyzed a characteristic by types of urban regeneration helping the establishment of urban identity under social condition change. It will be foundation of sustainable urban development with strategy that secures world-wide competitive power. For this, sample cases that established identity from urban regeneration were reviewed about the main subject and the supporting subject in business side and hardware, software, system, and finance in design factors. 4samples each in inheritance intensification type and change creation type were selected and analyzed. The result said it is most effective to establish urban identity when inheritance intensification type is the private-centered for urban regeneration. And it is better to do the project that the main subject and the supporting subject are taken by the private or the private-leading partnership. It is necessary to manage the region and plan events with software design factors more than hardware design factors. In addition, for urban identity, it was found to be desirable to utilize and preserve fully current resources such as historical scenery and activate the communities than making new facilities. On the contrary, the project based on change creation type needs to be under the public management with innovative idea. Also, when it comes to design factors, facilities related to culture and art and community spaces should open and run actively. It is important for the region to improve its image by New design style such as TOD. In software side, it is important to manage the region by monitoring about urban regeneration business and solve social mix and employment problem. On the other hand, in terms of system and administration, both types don't show a difference in urban identity establishment, since it is same that both should make partnership and get a support of subsidy to be most effective.

APEX 모형을 이용한 유기농경지에서의 질소 부하량 저감을 위한 지표피복 효과 (Surface Cover Effect for Reducing Nitrogen Load in Organic Farming Fields using APEX Model)

  • 소현철;장태일;김동현;설동문;윤광식
    • 한국농공학회논문집
    • /
    • 제60권5호
    • /
    • pp.55-67
    • /
    • 2018
  • The objectives of this study were to monitor organic farming upland compared with conventional upland field and to evaluate nutrient loads reduction of surface cover effect with long-term historical climate data. APEX(Agricultural Policy Environmental eXtender) model was validated with experimental data and used for assessing surface cover scenarios for 30-year simulation periods. The validated values of RMSE(Root Mean Square Error), RMAE(Root Mean Absolute Error), $R^2$ and E(Nash-Sutcliffe efficiency) for runoff were 1.17-1.37 mm/day, 0.28-0.45 mm/day, 0.88-0.90 and 0.82-0.94 in two treatments, respectively. Those for water quality (nitrogen) were 0.05-0.16 kg/ha, 0.52-0.75 kg/ha, 0.67-0.72 and 0.32-0.70 in two treatments, respectively, and therefore the validated model showed good agreement with the observed runoff and nitrogen load for the study period. When decreasing the surface cover rate of organic farming field to 75%, 50%, 25%, and 0% (conventional field), average annual runoff increased by 7%, 15%, 23% and 31%, respectively. Under same condition of decreasing the surface cover rate, average annual nitrogen loads increased by 1.4 times, 1.7 times, 2.0 times, and 2.3 times compared with organic farming field, respectively. This study showed that it is possible to present an appropriate surface cover ratio to maintain conventional production and minimize nonpoint sources pollution for organic farming system, although long-term monitoring is needed to determine its effects on environmental concerns, crop competition, and other uncertainty.

시각화 기반의 효율적인 네트워크 보안 상황 분석 방법 (An Efficient Method for Analyzing Network Security Situation Using Visualization)

  • 정치윤;손선경;장범환;나중찬
    • 정보보호학회논문지
    • /
    • 제19권3호
    • /
    • pp.107-117
    • /
    • 2009
  • 네트워크 관리자가 침입 탐지 시스템, 방화벽 등의 보안 장비에서 발생하는 경보 메시지를 통하여 네트워크에서 이상 현상이 발생하였는지를 인지하고, 이상 현상이 실제 네트워크 보안 위협인지를 판단하기 위해서는 경보 메시지와 관련된 트래픽을 검색하고 분석하는 등의 일련의 작업이 필요하다. 하지만 보안 장비에서 발생되는 경보 메시지의 양이 많을 뿐만 아니라, 네트워크 관리자가 관련 트래픽을 검색하고 분석하는데 많은 시간이 소요되는 등의 문제점이 있다. 따라서 본 논문에서는 보안 이벤트 시각화 기술을 사용하여 네트워크의 보안 상황을 보다 빠르고 효과적으로 분석 할 수 있는 방법을 제안한다. 제안된 방법의 경우 전체 IP주소 공간에서 트래픽의 흐름을 표현하기 때문에 네트워크 관리자가 현재 네트워크에서 발생되는 보안 위협을 보다 빠르게 판단할 수 있도록 도와준다.

철근콘크리트 거더의 관리기준치 설정을 위한 도로교설계기준 처짐 제한치의 안전계수 추정에 관한 실험적 연구 (The Experimental Study for inferring the Safety-Factor of the Limit of Span-Deflection in Standard Specifications for Highway Bridges for Setting the Standard of the Measurement Criteria in RC Girder)

  • 주봉철;박기태;황윤국;이우상
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권1호통권53호
    • /
    • pp.145-151
    • /
    • 2009
  • 교량 계측시스템의 계측항목 중 거더 중앙부 처짐은 교량 상부구조의 대표적인 거동 특성이며, 중요한 상태평가 항목이다. 교량 계측시스템에서 교량 경간 중앙부 처짐에 대한 관리기준치를 설정하는 여러 가지 방법 중 도로교 설계기준의 처짐 제한치를 적용하는 경우도 있다. 그러나 도로교설계기준의 처짐 제한규정은 안전성 측면보다는 사용성 측면에서 검토되어 실제 교량에서 발생할 수 있는 위험상황에 대하여 어느 정도 안전을 보장하는지 판단하기 어렵다. 본 연구는 현재 교량 설계시 경간 중앙부 처짐의 사용성 검토 기준이고, 일부 교량 상시계측시스템의 경간 중앙부 관리기준치로 적용되고 있는 도로교설계기준의 처짐 제한치가 포함하고 있는 파괴(항복)에 대한 실질적인 안전율을 추정해 보고자 실내구조실험을 통하여 일반 철근콘크리트 거더의 안전율을 추정하였다.

중성자, 감마선, 엑스선 방사선 측정 및 통합 제어 시스템 개발 (Development of Neutron, Gamma ray, X-ray Radiation Measurement and Integrated Control System)

  • 고태영;이주현;이승호
    • 전기전자학회논문지
    • /
    • 제21권4호
    • /
    • pp.408-411
    • /
    • 2017
  • 본 논문에서는 중성자, 감마선, 엑스선 등의 방사선을 측정하는 통합 제어 시스템을 제안한다. 제안하는 시스템은 원격 또는 네트워크상으로 측정 및 분석한 데이터를 디스플레이를 통해 모니터링 및 제어할 수 있는 장비로서, 현장에 가지 않고도 시스템 각 구성 부분의 상태를 보고 변경하여 원격으로 감시 및 관리할 수 있다. 제안하는 시스템은 감마선/엑스선 센서부, 중성자 센서부, 주제어 임베디드 시스템부, 전용 디스플레이 장치 및 GUI부, 원격 UI부 등으로 구성된다. 감마선/엑스선 센서부는 NaI(Tl) Scintillation Detector를 사용하여 저준위의 감마선 및 엑스선을 측정한다. 중성자 센서부는 Proportional Counter Detector(저준위 중성자)와 Ion Chamber Type Detector(고준위 중성자)를 사용하여 중성자를 측정한다. 주제어 임베디드 시스템부는 방사선을 검출하여 초단위로 샘플링하고 누적된 펄스 및 전류값에 대한 방사선량으로 변환한다. 전용 디스플레이 장치 및 GUI부는 방사선 측정 결과와 변환된 방사선량 및 방사능량 측정 수치를 출력하고, 사용자에게 제어 조건 설정 및 검출부에 대한 캘리브레이션 기능을 제공한다. 원격 UI부는 측정된 값들을 취합, 저장하여 원격 감시 시스템에 전달한다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 중성자 검출부는 ${\pm}8.2%$ 이하의 측정 불확도가 측정되었고, 감마선, 엑스선 검출부는 7.5%이하의 불확도가 측정되어 국제 표준인 ${\pm}15%$ 이하에서 정상동작 됨이 확인되었다.

국내 경영혁신 활동의 핵심 성공요인 문헌 연구 - 6시그마, TQM, 린 6시그마, ERP, TPM, BPR, Project Management, System Engineering 중심으로 - (Literature Review of Key Success Factors of Management Innovation Actions in Domestic - Focused on Six Sigma, TQM, Lean Six Sigma, ERP, TPM, BPR, Project Management, System Engineering -)

  • 문제옥;윤성필
    • 품질경영학회지
    • /
    • 제44권3호
    • /
    • pp.639-648
    • /
    • 2016
  • Purpose: Existing precedent studies include success factors of individual management innovation activities constantly. However, those studies have limitations about the common key success factors of individual management innovation activities. Methods: For this study, we investigate the key success factors using literature research of the most typical management innovation activities adopted and implemented by many companies in Korea, such as 6sigma, TQM, Lean 6sigma, ERP, TPM, BPR, Project Management, System Engineering. Factors emerging repeatedly was combined into common factors and inherent factors that are necessary for the success of individual management innovation activities are designated to essential factors. Results: 'Essential factors for Six Sigma' consist of 5 items. Black belt operating system, personnel management system linkage, the correct management of the data, perform improvement projects associated with financial performance financial result, linked to financial performance improvement project, project progress management. 'Essential factors of TQM' are arranged 4 items. Quality team's independence and role, goal-setting, Quality Information System, corporate's philosophy of quality first. 'Essential factors of Lean Six Sigma' are the selection of value stream which is based on the customer needs and the value creation and identify the project based on the selected value in the company. 'Essential factors of ERP' are investigated 6 items. Ongoing system maintenance and upgrades, the measurement and support of user satisfaction, the operating systems and the policies for the maintenance, IT infrastructure, change adaption condition monitoring, focusing on improving business performance. 'Essential factors for TPM' are arranged 4 items. Motivated and energetic Bottom-Up, CEO's recognition of the importance facility management, long-term perspective of necessity and ongoing patience. 'Essential factors for BPR' are the pursuit of change process and the staff's sense of crisis management. 'Essential factors for Project Management' are the strategy that reduce the risk management skills through risk management and the understanding and organized management for the project participant's needs. 'Essential factors for System Engineering' consist of 2 items. The first is the design for the best balanced system with pre-analysis about the compromise the cost, schedule and the performance. The second is the analysis of large problem into small problems which can solved. We have found the solution considering components of the interface through the systematic perspective. Conclusion: Common factors and essential factors presented in this study will properly help to introduce the individual management innovation activities for the each business sector and implement management innovation. After this study, new literature research that reflect new studies should accomplish steadily.

가스보일러 CO중독 위험성 예측 및 근원적 예방기술 개발 (The Risk Assessment of Carbon Monoxide Poisoning by Gas Boiler Exhaust System and Development of Fundamental Preventive Technology)

  • 박찬일;류기윤
    • 한국가스학회지
    • /
    • 제25권3호
    • /
    • pp.27-38
    • /
    • 2021
  • 본 연구에서는 가스보일러 가동 중 배기통이 이탈하는 상황이 발생했을 때, 시스템적으로 인지하고 자동으로 보일러 가동을 중지하여 일산화탄소를 포함한 유해 배기가스가 실내로 유입되는 상황을 근원적으로 차단하는 방안을 제시하였다: (1) 연소에 필요한 공기량을 제어하기 위해 설치된 풍압센서(APS : Air Pressure Sensor)의 출력전압을 측정하여 배기통의 정상상태와 이탈상태를 감시하는 기능을 추가한다. (2) 배기통이 이탈하면 APS의 출력전압이 상시 운전범위에서 일시적으로 상승하게 된다. 보일러 제어부인 PCB가 이 상태를 배기통 이탈로 간주하여 보일러 가동을 멈추면서 배기통 이탈 상태를 실내온도 조절기에 표시하도록 한다. 또한 국토교통부령으로 정한 「건축물의 설비기준 등에 관한 규칙」에서 명시한 공동주택 및 다중이용시설의 환기시설 기준에 따라, 실내공기 교환횟수에 맞는 풍량을 적용하여 실내공기를 환기하는 실험을 실시하였다. 이 실험 결과 실제 일산화탄소가 실내에 누출된 최악의 상태에서, 중독사고 예방이 가능하다는 것을 확인하였다. 다만, 동 규칙에서 정의한 시간당 실내공기 교환횟수를 기존 0.7회에서 0.5회로 2013년부터 완화하여 운영하고 있는데, 실험결과 8시간 가중평균 노출기준인 TWA 30 ppm을 초과하는 농도가 측정되어 기준을 강화할 필요성이 있다. 본 연구 결과에 기초하여 가스보일러 배기압력의 기계적 인지를 통해 배기통 이탈을 감지하는 기술과 일산화탄소 경보기와 연동된 실내공기 환기시스템 기술을 도입한다면 일산화탄소 중독사고가 크게 감소될 것으로 판단된다. 제조 및 검사단계의 문제점을 보완하고, 올바른 설치 및 수리, 사용자의 배기통 이탈에 대한 관심이 더해졌을 때, 일산화탄소 중독으로 인한 인명사고를 예방하는데 효과적인 대책이 될 것으로 사료된다.

다채널 자속누설 센서를 이용한 강케이블의 국부 단면손상 검색 (Local Fault Detection Technique for Steel Cable using Multi-Channel Magnetic Flux Leakage Sensor)

  • 박승희;김주원;이창길;이종재;길흥배
    • 한국전산구조공학회논문집
    • /
    • 제25권4호
    • /
    • pp.287-292
    • /
    • 2012
  • 본 연구에서는 다채널 자속누설 센서를 이용하여 강케이블의 국부손상을 검색하였다. 먼저 자속누설 기법을 고정된 케이블 구조물에 적용하기 위해 프로토타입의 8채널 자속누설 센서헤드를 제작하였고, 국부손상이 발생한 케이블을 구현하기 위하여 PVC 파이프에 강케이블을 채워 강케이블 다발 시편을 제작하였고, 케이블 시편 외부 및 내부에 다양한 크기 및 방향을 가지는 국부손상을 단계적으로 발생시켰다. 이와 같이 제작된 강케이블 시편을 대상으로 각 손상단계에서 자속누설 센서헤드를 이용하여 자속신호를 스캔하고 출력전압으로 표현하였다. 이어서 일반극치분포를 이용해 손상유무를 판단할 수 있는 기준이 되어줄 임계값을 설정하였고, 이를 각 채널에서 계측된 자속신호와 비교하여 객관적인 손상판단을 수행하였다. 또한 케이블 모니터링에 있어 가장 중요한 정보인 손상의 길이방향 위치를 효과적으로 검색하기 위해 모든 채널의 자속값을 합하여 총합값의 형태로 임계값과 함께 나타내었다. 최종적으로 임계값을 초과한 부분의 길이방향 및 원주방향 위치를 실제 손상과 비교함으로써 본 기법의 국부손상 검색 가능성을 살펴보았다.