• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.177-182
• /
• 2011

A diketo-type ligand was synthesized by the Knoevenagel condensation reaction of thiophene-2-aldehyde with acetylacetone, subsequently its transition metal complexes with Cu(II), Ni(II), and Co(II) chlorides were also prepared. All the complexes were characterized by various physico-chemical methods. The molar conductivity data reveals ionic nature for the complexes. The electronic spectrum and the EPR values suggest square planar geometry for the Cu(II) ion. Interaction of the Cu(II) complex with CTDNA (calf thymus DNA) was studied by absorption spectral method and cyclic voltammetry. The $k_{obs}$ values versus [DNA] gave a linear plot suggesting psuedo-first order reaction kinetics. The cyclic voltammogram of the Cu(II) complex reveals a quasi-reversible wave attributed to Cu(II)/Cu(I) redox couple for one electron transfer with $E_{1/2}$ values -0.240 V and -0.194 V. respectively. On addition of CTDNA, there is a shift in the $E_{1/2}$ values 168 mV and 18 mV respectively and decrease in Ep values. The shift in $E_{1/2}$ values in the presence of CTDNA suggests strong binding of Cu(II) complex to the CTDNA.

• Clean Technology
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2007

An experimental study to investigate the condensing heat transfer characteristics of small diameter horizontal double pipe heat exchangers with R-22 and R-410A was performed. Experimental facility was constructed to calculate and observe HTC(heat transfer coefficients), flow patterns and pressure drop. The main components include a liquid pump, an evaporator, a condenser(test section), a sight-glass, pressure taps and measurement apparatus. Two pipes of different diameters are tested; One 5.35 mm ID 0.5 mm thick, the other 3.36 mm ID 0.7 mm thick. The mass flow rate ranged from 200 to $500\;ks/m^2{\cdot}s$ and heating capacity were form 1.0 to 2.4 kW. The flow patterns of R-22 and R-410A were observed with a high speed camera through the sight-glass. The tests revealed that HTC of R-410A was higher than that of R-22 by maximum 5%. Annular pattern was observed for the most cases but stratified flow was also detected when x<0.2. The pressure drop in 3.36 mm ID pipe was higher than that of 5.35 mm by $30{\sim}50%$. Comparing with previous correlations such as Shah, Fujii and Soliman's, Fujii' showed the best good agreement with my data with a maximum deviation of 40%.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.634-638
• /
• 1998

Monodisperse, spherical $PMSQ/TiO_2$ composite fine powders were prepared by modified sol-gel process where 300 nm $TiO_2$ fine powders were used as seed particles for hetero-condensation with hydrolyzed MTMS (Methyltrimethoxysilane). The reaction was carried out under $N_2$ atmosphere at ambient temperature using $NH_3$ as a catalyst. Methanol was used as a solvent. Powder was obtained by the filtration of the solution with a glass filter and washing with acetone. The stirring rate, reaction temperature, $[H_2O]/[MTMS]$ and $[MTMS]/[TiO_2]$ ratio were varied to investigate shapes and sizes of particles. Monodisperse particles of $1-2{\mu}m$ diameter were obtained with [MTMS]=0.2 M, $[NH_3]=0.6M$, $[H_2O]/[MTMS]=100$, $[MTMS]/[TiO_2]=10-50$ at ambient temperature with mild stirring condition. These composite particles had a contact angle of almost 180 degree contact angle with water, which proves their excellent hydrophobicity. The study of UV absorption spectra showed that they have UV protecting effect.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.355-361
• /
• 2018

Mold grows more easily when humidity is higher in indoor spaces, and as such is found more often on wetted areas in housing such as walls, toilets, kitchens, and poorly managed spaces. However, there have been few studies that have specifically assessed the level of mold in the indoor spaces of water-damaged housing in the Republic of Korea. We investigated the levels of airborne mold according to the characteristics of water damage types and explored the correlation between the distribution of mold genera and the characteristics of households. Samplings were performed from January 2016 to June 2018 in 97 housing units with water leakage or condensation, or a history of flooding, and in 61 general housing units in the metropolitan and Busan area, respectively. Airborne mold was collected on MEA (Malt extract agar) at flow rate of 100 L/min for 1 min. After collection, the samples were incubated at $25^{\circ}C$ for 120 hours. The cultured samples were counted and corrected using a positive hole conversion table. The samples were then analyzed by single colony culture, DNA extraction, gene amplification, and sequencing. By type of housing, concentrations of airborne mold were highest in flooded housing, followed by water-leaked or highly condensed housings, and then general housing. In more than 50% of water-damaged housing, the level of airborne mold exceeded the guideline of Korea's Ministry of Environment ($500CFU/m^3$). Of particular concern was the fact that the I/O ratio of water-damaged housing was greater than 1, which could indicate that mold damage may occur indoors. The distribution patterns of the fungal species were as follows: Penicillium spp., Cladosporium spp. (14%), Aspergillus spp. (13%) and Alternaria spp. (3%), but significant differences of their levels in indoor spaces were not found. Our findings indicate that high levels of mold damage were found in housing with water damage, and Aspergillus flavus and Penicillium brevicompactum were more dominant in housing with high water activity. Comprehensive management of flooded or water-damaged housing is necessary to reduce fungal exposure.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.459-465
• /
• 2022

A pitch coating method was proposed for the purpose of improving the electrochemical properties of natural graphite. The synthesis conditions of pitch coating were optimized via measuring electrochemical properties of pitch-coated graphite anodes. As the synthesis temperature increased, the thermal stability was improved in addition to an increase in the softening point and residual carbon weight. However, the synthesis temperature of 430 ℃ resulted in the synthesis of a large amount of NI (NMP Insoluble) due to excessive condensation reaction. As the surface uniformity and coating thickness increased due to high thermal stability, the initial coulombic efficiency and rate capability of the pitch-coated graphite were improved. However, the graphite coated with the pitch containing excessive NI showed lower electrochemical properties than the uncoated graphite. NI had low dispersibility and formed spheres after heat treatment, so it formed the heterogeneous and thicker SEI layer. The optimum conditions for forming a uniform surface and an appropriate coating layer were investigated.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.17-27
• /
• 2004

Cholesterol inhibitory activity was investigated to develop the functional food from edible forest resources such as Allium victorialis var. platyphyllum and other 12 species. Among tested samples by enzyme-linked immunosorbant assay (ELISA), leaf extracts of A. victorialis var. platyphyllum inhibited 73.9% of the activities of 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMG-CoA reductase) which is the highly regulated and major rate-limiting of the cholesterol biosynthesis pathway. Moreover, those extracts inhibited 76.7% of squalene synthase which catalyzes the head-to-head condensation of two farnesyl pyrophosphate molecules to form squalene in the biosynthesis of cholesterol. In order to find out the compounds which would play a key role in inhibitory activity of cholesterol, kaempferol and quercetin were isolated from the dichloromethane soluble fraction of extracts of A. victorialis var. platyphyllum. Kampferol, quercetin and each soluble fraction was also subjected to the test of the mRNA expression of HMG-CoA reductase and squalene synthase by reverse transcriptase-polymerase chain reaction (RT-PCR) assay, respectively. By treating both enzymes with 10 ㎍/㎖ of kaempferol and quercetin for 24 hours, respectively, the mRNA expression was not observed, suggesting that both compounds inhibited the biosynthesis of cholesterol at mRNA level. In this regard, it could be inferred that cholesterol inhibitory activity of A. victorialis var. platyphyllum was derived from kaempferol and quercetin. Both compounds have already been found in many plant extracts including hardwood and softwood, but it might be first known that they have cholesterol inhibitory activity.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.271-278
• /
• 1999

This study was conducted to investigate the cytogenetic properties, in vitro development, and their relationship in the bovine reconstituted embryos following cell cycle-controlled nuclear transfer. Sixteen-cell stage embryos were treated by nocodazole, and after release from nocodazole treatment, their blastomeres were separated and allowed to subsequent cleavage. Blastomeres within 1.5 h post cleavage(hpc) and at 3hpc were transferred to enucleated oocytes at MII-phase or S-phase. Donor nuclei transferred into M II-phase recipients underwent various nuclear remodeling, such as extrusion of a polar body(PB)-like structure, premature chromosome condensation(PCC) and chromatin modifications. These nuclear remodeling patterns varied by the time post cleavage of donor blastomeres. Developmental rate to the blastocyst stage differed with time post cleavage of donor blastomeres and existence of a PB-like structure. Whereas do-nor nuclei transferred into S-phase oocytes did not undergo PCC and other major modifications, and their developmental potentials less depended on the nuclei types. This result confirms that the nuclear remodeling type differs with donor and recipient cell cycle stage, which affect the development of reconstituted bovine embryos.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.236-243
• /
• 2023

This study aimed to investigate the survival rates, hematologic responses, and histological responses of juvenile Korean rockfish (Sebastes schlegelii) exposed to artificial increase of water temperature. The water temperature was incrementally raised from the initial 23℃ to 26℃, 28℃, 30℃, and 31℃, with a 1℃ increase every 24 hours. The fish were exposed to each water temperature setting for a period of seven days. No mortality was observed at 26℃ and 28℃. However, at 30℃, mortality began on the 4th day of exposure, with an overall survival rate of 1.5% at the end of the seventh day. At 31℃, mortality occurred as early as the first day of exposure, and all fish had perished by the second day. Plasma cortisol and glucose concentrations increased as water temperature rose, with a significant decrease observed at 31℃. No significant difference in plasma GPT concentration was observed across the various experimental temperatures. In contrast, plasma GOT concentration significantly increased at 31℃. Histological examination revealed that both the liver and gills exhibited normal histology at the initial temperature of 23℃ and at 26℃. However, at 28℃ hepatocellular hypertrophy and gill lamellar epithelial hyperplasia and epithelial cell lifting were observed. At 30℃, hepatocellular condensation and gill lamellar fusion were noted. Finally, at 31℃, severe histological changes were observed, including hepatocellular necrosis, liver congestion, and gill filament necrosis.

• Development and Reproduction
• /
• v.6 no.2
• /
• pp.97-104
• /
• 2002

In most mammals, mature oocyte-cumulus complexer(OCCs) ovulate into the oviduct where fertilization by sperm takes place. However, the complex that fail to fertilize eventually undergoes degeneration while they reside in the oviduct. Yet there is no blown mechanism how both oocyte and cumulus cells degenerate. Using human follicular fluid (hFF), bovine oviductal tissue extract (BOX) and mouse OCC, the present study aimed to find how the oviduct influence the viability of the oocyte and cumulus cells in vitro. There was no difference of oocyte maturation rate between the control and BOX-treated groups. However, there was a significant difference in the survival of cumulus cells between two groups. Cumulus cells cultured in the presence of hFF alone underwent initially expansion and then they formed monolayer in the culture dish. Even after 72 hr, they proliferated well and showed fibroblast-like morphology. Cumulus cells cultured in the presence of both hFF and BOX also expanded after 24 hr, however, after 72 hr culture, they eventually detached and degenerated. Cumulus cells cultured in the BOX alone gave a similar drastic result. When the cumulus cells cultured in the presence of BOX were stained with DAPI, their nuclei showed partial condensation and fragmentation. After detailed analysis of these cells by TUNEL assay, many nuclei of them exhibited well stained spots indicating the signs of apoptosis. Based upon these observations, it is suggested that BOX might possess a factor that leads mouse cumulus cells to undergo apoptosis in vitro.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.498-506
• /
• 2019

This study is based on a coating method that provides utilization value as a micronised powder for cosmetic raw materials using natural minerals buried in Bonghwa, Gyeongsangbuk-do in Korea. The mineral powder name is called Buseok, and chemical name is pumice powder. The results of a study on the efficacy of cosmetics are reported by the development of particulate powder to assess the performance of this powder. First of all, in order to coat the surface of this powder with oil, aluminum hydroxide was coated on the particulate surface and then coated with alkylsilan. In addition, it was coated with vegetable oil to prevent condensation of the powder and increase the dispersion in the oil phase. First; the particle size of pumice powder was from 10 to 50mm having porous holes on the surface of the particles. Second; The components of this powder contained $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$. Third: The particles of this powder have a planetary structure and are reddish-brown with porosity through SEM and TEM analysis. Fourth; the far-infrared radiation rate of this parabolic powder was $0.924{\mu}m$, and the radiative energy was $3.72{\times}102W/m^2$ and ${\mu}m$. In addition, the anion emission is 128 ION/cc, which shows that the coating remains unchanged. Based on these results, it is expected to be widely applied to basic cosmetics such as BB cream, cushion foundation, powderfect, and other color-coordinated cosmetics, sunblock cream, wash-off massage pack as an application of cosmetics. (Small and Medium Business Administration: S2601385)