• 한국임상수의학회지
• /
• 제34권1호
• /
• pp.54-57
• /
• 2017

A 1-year-old castrated male Schnauzer dog was presented with heart murmur. Auscultation revealed systolic murmur located at the left heart base (grade 5/6). There were no remarkable findings on thoracic radiographs. Two-dimensional echocardiography revealed subaortic tunnel-like obstruction at the entrance to the left ventricular outflow tract. Anterior mitral valve leaflet appeared to be tethered to septum with minimal motion. Chordae tendineae was abnormally thickened. Color Doppler analysis revealed turbulent flow starting below the aortic valve. Mitral regurgitation was presented during systole. Spectral Doppler recordings revealed high velocity flow through the aorta and mitral regurgitation. Based on echocardiographic examination, the dog was diagnosed with subaortic stenosis concurrent with mitral dysplasia. The patient was medicated with ${\beta}-blocker$ and diuretics. It has been doing well without apparent clinical signs at 2 year after the diagnosis.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.303-303
• /
• 2018

안정적인 수자원 운용을 위해서는 정확한 유량예측 기술이 필요하다. 본 연구에서는 유량예측 정확도의 개선을 위해 베이지안 추론(Bayesian inference) 기법과 앙상블 유량 예측(Ensemble Streamflow Prediction, ESP) 기법의 결합을 통한 새로운 유량예측 기법(Bayesian ESP)을 제안하였다. ESP를 통한 유량 예보 앙상블은 베이지안 추론의 사전정보로 활용되며, 관측 유량과 ESP 전망 결과의 선형관계를 통해 우도함수가 추정된다. 우도함수는 관측 유량이 존재하는 과거 기간에 대한 ESP를 수행한 후 예보 시점의 관측 유량(concurrent observed flow)과 선행 관측 유량(lagged observed flow)과의 다중선형회귀 모형을 통해 추정된다. 사전정보와 우도함수는 정규분포로 가정되며, 따라서 최종 유량예측인 사후정보 역시 정규분포함수로 산정되게 된다. Bayesian ESP은 ESP에서 발생하는 강우-유출모형 오차의 개선을 통해 수문예측의 정확도를 개선하게 되며 정규분포함수로 최종 결과가 산정되므로 확률예보 형태의 수문 전망도 가능하다. 본 기법을 전국 35개 댐 유역에 시범적용을 한 결과, 모든 유역에서 기존 ESP 기법 대비 수문예측 정확도의 개선을 가져왔으며, 우도함수 추정에 있어 선행 유량의 포함 여부가 수문 예측 정확도의 추가적인 개선을 가져왔다. 본 기법은 주간 예보부터 계절 예보까지 탄력적으로 구축이 가능하며 적용 결과 리드 타임이 길어질수록 예측 능력이 감소되었지만 전체 구간에 있어서 Bayesian ESP 기법이 가장 우수한 예측 정확도를 보여주었다.

• 한국동물위생학회지
• /
• 제34권3호
• /
• pp.265-271
• /
• 2011

Lymphoma is the most common hematopoietic malignancy in dogs. Diagnosis of lymphoma is classically performed by morphological assessment and immunohistochemistry. But some cases in the early stage are difficult to distinguish and need more objective and accurate methods. So, Polymerase chain reaction (PCR) for antigen receptor rearrangements (PARR) and flow cytometric immunophenotype of lymphoma have been developed continuously. In this study, we performed these two methods to classify lymphoma type in 3 cases. According to PARR analysis, B cell origin lymphoma was diagnosed in two of three cases by testing PBMC and lymph node. All fine needle aspiration (FNA) samples of lymph nodes had high expression of CD21 on >88% of total cell population and PBMC samples also showed high expression of CD21 on >30% of total lymphocytes in those two cases, while the expression of CD3, CD4 and CD8 was absent. These results suggest that concurrent use of PARR and flow cytometric immunophenotype is more effective and valuable tool for the diagnosis and monitoring of canine lymphoma patients.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.543-552
• /
• 2014

Fixed Electromagnetic Wave Surface Velocimetry (Fixed EWSV) has been started to be used to measure flood discharge in the mountain stream, since it has various advantages such that it works well to continuously measure stream discharge even in the night time as well as very strong weather. On the contrary, the Fixed EWSV only measures single point surface velocity, thus it does not consider varying feature of the transverse velocity profile in the given stream cross-section. In addition, a conventional value of 0.85 was generally used as the ratio for converting the measured surface velocity into the depth-averaged velocity. These aspects could bring in error for accurately measuring the stream discharge. The capacity of the EWSV for capturing rapid flow velocity was also not properly validated. This study aims at conducting error analysis of using the EWSV by: 1) measuring transverse velocity at multiple points along the cross-section to assess an error driven by the single point measurement; 2) figuring out ratio between surface velocity and the depth-averaged velocity based on the concurrent ADCP measurements; 3) validating the capacity of the EWSV for capturing rapid flow velocity. As results, the velocity measured near the center by the fixed EWSV overestimated about 15% of the cross-sectional mean velocity. The converting ratio from the surface velocity to the depth-averaged velocity was 0.8 rather than 0.85 of a conventional ratio. Finally, the EWSV revealed unstable velocity output when the flow velocity was higher than 2 m/s.

• 한국화재소방학회논문지
• /
• 제26권2호
• /
• pp.90-96
• /
• 2012

외장재에 의한 수직화재확산은 확산속도가 구획화재에 비해 매우 빨라 이에 대한 화재의 특성 분석이 요구된다. 본 연구에서는 건물 외부에서 발생한 화재가 연소 확대되면서 수직으로 상승하여 개구부를 통해 유입되는 화재의 성상에 대해서 외장재로 널리 사용되는 심재가 폴리에틸렌인 일반 알루미늄복합패널에 대해 화재시뮬레이션을 적용하여 연구하였다. 그 결과, 수직확산화염은 화재초기에 2층까지 상승하는 데는 약 135초가 걸렸지만 10층까지는 470초, 최고층인 30층까지 상승하는 데는 711초에 도달하는 것으로 분석되어 고층부로 갈수록 난류 및 외장재 설치공간의 연돌효과에 의해서 급격히 확대되는 것을 알 수 있었다. 이러한 연구 결과로 외장재가 설치된 건축물의 화재 시 개구부를 통한 화재는 동시다발적으로 그 건물의 내부에 확대되는 심각성을 확인할 수 있었다.

• 한국시뮬레이션학회논문지
• /
• 제15권1호
• /
• pp.1-10
• /
• 2006

유연생산시스템은 많은 병렬적이고 동시 발생적인 기계들, 장치들, 수송 시스템들로 구성되며, 이러한 것들은 각각 버퍼들, 도구들, 라우터들로 나누어진다. 시스템에서 여러 생산품들의 병렬적인 흐름은 자원들을 이용하기 위해 서로 경쟁하게 되며, 유연생산시스템의 이러한 특징들로 인해 교착상태가 발생한다. 교착상태는 상대방이 점유하고 있는 자원을 서로 요구하는 과정에서 흐름이 멈추어진 상태를 말하므로, 이러한 교착상태의 탐지와 회피는 매우 중요한 문제이다. 이 사실에 근거하여 일반 플레이스와 자원공유플레이스 사이의 관계를 나타내는 DAPN(Deadlock Avoidance Petri Wet)을 정의하여 교착상태를 탐지하고 회피하기 위한 새로운 알고리즘을 연구하였다. 또한 제안된 알고리즘을 유연생산시스템의 특징을 가진 모델에 적용하여 그 결과를 제시한다.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.219-228
• /
• 2004

We can be acquire the conformation about on the due date of supplier by using the A TP(A vail able to Promise) function of management about real and concurrent access on the supply chain, also decide the affect about product availability due to forecasting or customer's orders through the A TP. Under the these environments, defines the A TP rule that can improve the customer value and data flow related the LTV(Life Time Value) and builds on a algorithm. In this paper, It consolidates the necessity on a LTV (Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV rule that can improve the customer value. And then, Scheduling plays an important role in shop floor planning. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.204-209
• /
• 1995

The implementation of rapid prototyping technologies has been developed for automotive engineering by utilizing concurrent engineering principes integrated with slective laser sintering. The Selective Laser Sintering, in which a part is generated in layers form powder using a computer-controlled laser scanning apparatus and power feed system. An over view of the basic principles of SLS Machine operation is given. Binding mechanisms are described for power which becomes thermally activated bye the scanning laser beam; viscous flow and melting of a low-melting-point phase in powder. The production of parts from metal is described, including post processing to improve structural integrity and induce a transformation.

• 산업공학
• /
• 제15권1호
• /
• pp.55-63
• /
• 2002

This paper utilizes the FIDO methodology (Function, Information, Dynamic, Organization modeling) which is an enterprise modeling tool that can describe inter-organizational interaction (specifically between prime and sub contractors in this experiment). FIDO follows the standard IDEFO rules in order to demonstrate how a cascading information flow can evolve from a customer to a prime to a subcontractor in a concurrent manner, in a supply chain environment. Background on these processes is presented, followed with the newly derived process and methodology. This is presented in a supply chain management context, and results from an actual experiment at Motorola utilizing subcontractors that supply custom machine parts is presented and reviewed.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1291-1293
• /
• 2007

Due to dense deployment and innumerable amount of traffic flow in wireless sensor networks (WSNs), congestion becomes more common phenomenon from simple periodic traffic to unpredictable bursts of messages triggered by external events. Even for simple network topology and periodic traffic, congestion is a likely event due to dynamically time varying wireless channel condition and contention caused due to interference by concurrent transmissions. In this paper, we have proposed three mechanisms: upstream source count and buffer based rate control and snoop based MAC level ACK scheme to avoid congestion. The simulation results show that our proposed mechanism achieves around 80% delivery ratio even under bursty traffic condition