• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.119-131
• /
• 1994

In this paper, we first propose a new FPGA routing method in which seversal netw are routed concurrently by applying the readitional maze routing method. We then introduce CMRF (concurrent maze Router for FPGA) which can be used for the routing of FpGAs of symmetrical array type by applying our new routing method. Given a set of nets, the proposed routing method performas the maze propagation and backtracing independently for each net and determines the routing paths concurrently by competition among nets. In CMRF, using this routing method, q nets are selected from the nets to be routed and they are routed concurrently, where q is the user given parameter determined by considering the computing environment. This process is repeated until either all the nets are routed or the remaining unrouted nets fail to their maze propagations. The routing of these nets are completed using the rip-up and rerouting technique. We apply our routing method to ten randomly generated test examples in order to check its routing performance. The results show taht as we increase the value of q, the routing completion rate increases for all the examples. Note that when q=1, our method is similar to the conventinal maze routing method. We also compare CMRF with the CGE method which has been proposed by Brown et.al. For the five benchmark examples, CMRF complete the routing with less wire segments in each connection block than the wire segments needed in the CGE method of 100% routing.

• 디지털산업정보학회논문지
• /
• 제11권3호
• /
• pp.79-90
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient concurrent multipath routing protocol with a small number of paths based on interaction between paths. The interaction between paths helps to reinforce the multipath reliability by making efficient use of resources. The protocol selects several nodes located in the radio overlapped area between a pair of paths as bridge nodes for the path-interaction. In order to operate the bridge node efficiently, when the transmission failure has detected by overhearing at each path, it performs recovery transmission to recover the path failure. Simulation results show that proposed protocol is superior to the existing multipath protocols in terms of energy consumption and delivery reliability.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.304-308
• /
• 1998

With the advances in concurrent engineering, schedulability has become an important design issue in machine loading and routing procedure. In this paper, four rules to improve schedulability of loading and routing are formulated as a mixed-integer programming model based on machine, routing and tool flexibilities. In this model, these rules are represented as an objective function or constraints. The impact of rules on the quality of schedules for the result of loading and routing is measured with makespan, throughput and average machine utilization.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.19-30
• /
• 1994

Generally, a planning problem in a flexible manufacturing system is considered to be a composite of three interdependent tasks : part selection, loading, and routing mix. This research presents a mathematical model which can concurrently solve part selection, loading, and routing mix problems, so the problems that are caused by treating the planning problems independently are solved. The mathematical model is aimed to minimize system unbalance and the number of late parts, including constraints such as machine capacity, tool magazine capacity, and tool inventory. To illustrate the application of the model, an example is included. Solution procedure based on Lagrangian relaxation is also suggested for larger-sized problems.

• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.845-851
• /
• 2019

본 논문에서는 애드혹 라우팅 네트워크를 다양한 사용자 모바일 기기에서 사용하기 위한 설계 방법을 소개하고, 이를 모바일 기기에 직접 구현하여 실제 환경에서 어떻게 작동하는지 성능을 관찰하고 검증하였다. 상용 사용자 모바일 기기에서의 애드혹 라우팅 네트워크의 사용성을 고려해 커널을 수정하지 않고 사용자 계층에서 구현하는 디자인을 선택하였다. 또한 이동성이 높은 환경에서 적절히 사용하기 위해 기존 애드혹 라우팅 네트워크들을 분석하였으며 그 결과 사용자 계층에서 AODV (ad-hoc on-demand distance vector) 프로토콜과 TCP를 구현하였다. 모바일 기기들이 일렬로 놓여 있는 환경과 중앙 노드가 주변 노드 여러 대와 통신하는 환경에서 실험을 진행하였고, 그 결과 일렬로 놓인 환경에서 최대 12 홉, 중앙 노드와 주변 노드가 통신하는 환경에서 최대 5 개의 노드와 통신하는 것을 확인하였다.

• 한국정보과학회논문지:정보통신
• /
• 제37권4호
• /
• pp.272-283
• /
• 2010

무선 메쉬 네트워크는 최근 주목받는 연구 주제로 부상하고 있다. 무선 메쉬 네트워크는 대규모 무선 랜 장치와 AP들이 서로 연결된 무선 기반 구조로, 무선 메쉬 네트워크의 처리량(throughput)을 향상시키는 것을 목표로 한 수많은 연구가 이루어진 바 있다. 여기에서는 동시에 생겨나는 다수의 트래픽 흐름들을 전송하기 위한 적절한 라우팅 경로를 설정하는 작업이 매우 중요하다. 본 논문에서는 IEEE 802.11 DCF하에서 전송되는 다수의 트래픽 흐름에 대해 신호 감지(Carrier Sensing), 간섭 등의 정보를 이용하여 양 말단간 (end-to-end) 처리량을 수학적으로 모델화하기 위한 방법을 제시하고자 한다. 각 단말에 성공적으로 이루어지는 평균 서비스 시간을 비교하고, 한편으로는 트래픽 흐름 가운데 병목현상이 발생하는 부분을 찾아내어 그로부터 말단간 처리량의 최대치를 계산할 수 있다. 본 논문에서 제시된 모델을 사용하여 동시에 전송되는 다수의 트래픽 흐름을 전달하기 위한 전송 경로에 대한 후보 경로를 얻어낼 수 있으며, 얻어진 경로로부터 처리량을 최대로 높일 수 있는 효율적인 경로를 찾아낼 수 있다. 제시된 모델링 기법과 최적 경로 선택 메커니즘은 무선 메쉬 네트워크에서의 다양한 트래픽 흐름을 사용한 시뮬레이션을 통해 평가하였다.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.33-44
• /
• 1996

This study deals with the development of wire path searching module as a part of automobile wire harness design system. Wire path searching module manages the free space, finds transition locations, and creates bundle paths to dramatically reduce a tedious iterative routing process which results in easy optimization of the bundle paths. A prime policy in the system configuration is to compromise between man's and computer's ability, and make it possible a designer's leading role in designing process. Human input is indispensable to cope with the special cases which were not considered in the initial design stage of the system. In this study, we improve the previous shortest-path-finding algorithm, (VGraph and RCA method) into a new method called Extended RCA. Bundles, connectors and transitions are handled as objects so one can manage and modify physical properties of the objects easily. Therefore a verification is allowed at any desired stage of design. The reuse of previous result is facilitated by using Dependency Structure, which represents the mutual relations among connectors, transitions, and bundles. Dependency Structure makes it possible the elimination of redundant calculating process, and consequently shorter routing time.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.13-29
• /
• 1997

This paper considers a new routing problem, successive max-min connection ratio problem (SMCRP), arised in circuit telecommunication networks such as SONET and WDM optical transport network. An optimization model for SMCRP is established based on link-flow formulation. It's first optimization process is an integral version of maximum concurrent flow problem. Integer condition does not give the same connection-ratio of each node-pair at an optimal solution any more. It is also an integral multi-commodity flow problem with fairness restriction. In order to guarantee fairness to every node-pair the minimum of connection ratios to demand is maximized. NP- hardness of SMCRP is proved and a heuristic algorithm with polynomial-time bound is developed for the problem. Augmenting path and rerouting flow are used for the algorithm. The heuristic algorithm is implemented and tested for networks of different sizes. The results are compared with those given by GAMS/OSL, a popular commercial solver for integer programming problem.n among ferrite-pearlite matrix, the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 70%, distribution range of fatigue.
ife was small in same stress level. (2) $\sqrt{area}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of $\sqrt{area}_{max}$ may be used as a guideline for the control of inclusion size in the steelmaking.

• 대한전자공학회논문지SD
• /
• 제48권8호
• /
• pp.25-32
• /
• 2011

네트워크-온-칩(Networks-on-Chip, NoC)은 고도로 복잡해지고 있는 다중 프로세서 시스템-온-칩(Multi-Processor System-on-chip, MPSoC)에서의 버스 트래픽 문제를 해결할 핵심기술이나 전통적인 전기적 상호 연결 구조로는 머지않아 대역폭 및 전력소비 등의 한계에 직면할 것으로 예상된다. 이러한 문제를 해결하기 위해 광학적 상호연결과 전기적 상호연결을 같이 사용하는 하이브리드 광학 NoC기술이 최근 활발히 연구되고 있다. 대부분의 하이브리드 광학 NoC에서 전기적인 연결은 웜홀 스위칭(Wormhole switching)과 deterministic 알고리즘인 X-Y 라우팅 알고리즘을 사용하며, 광학적 버스 기반 데이터 전송을 위한 경로 설정 및 광학 라우터 설정을 한다. 광학적 연결에서는 서킷 스위칭(Circuit switching) 방식을 사용하며, 미리 설정된 경로 및 라우터를 이용하여 payload 데이터만 전송을 하게 된다. 그러나 기존에 발표된 하이브리드 광학 NoC같은 경우에는 한 번에 하나의 경로에서만 데이터를 전송 할 수 있다는 단점을 가지고 있어 성능 향상에 한계가 있다. 본 논문에서는 하이브리드 광학 NoC에서 동시에 여러 경로를 이용하여 데이터를 전송하기 위해 전기적인 연결에서 서킷 스위칭 방식과 적응적(adaptive) 알고리즘을 이용하는 새로운 라우팅 알고리즘을 제안하며, 적응적 알고리즘의 문제점인 livelock을 제거할 수 있는 방법 또한 제안한다. 모의실험은 전기적인 NoC, 그리고 웜홀 스위칭 방식의 기존 하이브리드 광학 NoC와 비교 수행 하였다. 그 결과 제안된 방식은 기존 하이브리드 광학 NoC에 비해 60%의 throughput 증가, 그리고 전기적 NoC와 비교했을 때 65%의 전력 감소를 보였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.120-127
• /
• 2002

The multicasting is defined as the distribution of the same information stream from one to many nodes concurrently. There has been an intensive research effort to design protocols and construct multicast routing graphs for a single multicast group. However. there have been few researches about the relation between multiple and concurrent multicast groups. In this paper, the multiple multicast tree allocation algorithm to avoid congestion is proposed. The multicast group with different bandwidth requirement is also considered. A two-phase algorithm is proposed. The first phase is for basic search and the second phase for further improvement. The performance of the proposed algorithm is experimented with computational results. Computational results show that the proposed algorithm outperforms an existing algorithm.