• 패션비즈니스
• /
• 제24권5호
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.81-88
• /
• 2008

본 연구에서는 절토사면 공법선정시 고려해야 할 영향인자와 일반적으로 시공되고 있는 사면보강공법에 대한 합리적 분석을 위해 많은 의사결정기법 중 가장 광범위하게 사용되는 AHP기법을 이용하였다. 공법선택시 고려해야할 항목에 대한 가중치 중 안정성 및 내구성이 가장 중요한 평가요소로 분석되었으며, 안정성 및 내구성, 환경성이 공법선 택시 전체 비중의 50%이상을 차지하는 것으로 나타났다. 안전율 증가법 위주로 조사된 절토사면 보강공법에 대한 선호도 조사에서 보강토옹벽, 콘크리트옹벽과 절토공법이 가장 선호도가 높은 공법으로 조사되었다. 또한 실제 현장사례에 대해 적용한 결과 4가지 대안 중 절토공법이 최적대안으로 선정되어 가중치가 높은 특정 평가요소의 우수성보다는 모든 평가요소에서 고른 우수성이 현실적인 공법 선정과정에서 중요한 요소임을 알 수 있었다.

• 한국재난정보학회 논문집
• /
• 제13권3호
• /
• pp.366-375
• /
• 2017

콘크리트의 압축강도에 영향을 미치는 요인에는 공시체의 치수, 형상, 길이비(h/d), 단면 처리방법 및 공시체의 건습 등을 들 수 있다. 콘크리트 구조물의 코어 채취 시, 배근 간격에 의한 철근 절단, 벽두께, 구조물에 미치는 악영향 등을 고려할 때, 공시체 치수나 길이비를 2/1로 맞추기가 어려우므로 품질 관리 시 공시체 치수 및 길이비에 대한 강도의 보정이 필요하다. KS의 경우, 콘크리트에서 절취한 코어 나 보의 강도 시험 방법에서 길이비에 대한 보정 계수를 정하고 있으나, 최근 콘크리트의 고강도화가 진행됨에 따라 이를 일괄적으로 적용하기에는 다소 무리가 있다는 연구가 보고되고 있다. 본 연구에서는 압축강도 40~60MPa 범위의 콘크리트를 대상으로 공시체 크기와 길이비의 영향(이하 길이효과)과 길이비를 2/1로 유지하면서 치수의 변화에 따른 강도추이를 검토하기 위해 공시체 직경을 ${\emptyset}5{\sim}15cm$, 길이비를 2.0~1.25로 변화시킨 경우의 압축강도 시험 값을 KS F 2422에 의한 보정 계수와 비교하고, 고강도 콘크리트에의 적용 가능성을 확인하는데 그 목적이 있다.

• 문화기술의 융합
• /
• 제5권3호
• /
• pp.345-349
• /
• 2019

우리나라는 산지가 70% 이상으로 도로, 철도, 산업단지 조성 등의 기반시설 구축시 원지반 일부를 깍아 부지를 형성하는 이른바 깍기 비탈면이 널리 쓰이고 있다. 최근에는 환경 훼손에 대한 규제가 더욱 엄격해져 대규모 깍기 비탈면을 지양하고 최소한의 용지사용으로 목적구조물을 건설하기 위하여 다양한 방법의 공법들이 개발되어 적용되고 있으며, 그 중 활발하게 적용되는 공법이 패널식 옹벽 공법이다. 패널식 옹벽은 지보재 보강을 통한 원지반의 전단강도 증가와 그 지보재 전면에 프리캐스트 옹벽을 체결하여 벽체를 형성시킴으로써 수평토압에 저항하는 공법이다. 지보재는 쏘일네일링, 어스볼트, 그라운드앵커 등이 사용되고 있으며, 그 중 그라운드앵커는 강선에 미리 인장하중을 도입하는 보다 적극적인 보강형태로 전면판인 패널에 큰 집중하중이 작용하게 된다. 이러한 집중하중은 콘크리트 패널에 균열을 발생시키고 옹벽 자체의 내구성을 저해시키는 요인으로 본 연구에서는 이러한 기존 패널식 옹벽의 단점을 보완하기 위하여 패널 정착부에 강관 슬리브 및 보강재를 매입함으로써 균열을 방지하고, 패널 단부에 요철 모양의 전단키를 적용하여 기존 그라우트앵커가 가지는 개별거동에 대한 취약점을 보완하여 안정성을 향상시켰으며, 옹벽 전면 콘크리트 노출 및 정착부 돌출에 의한 경관성 저하문제를 자연석 문양 연출과 정착부를 돌출시키지 않는 단면구성으로 해결하였다. 패널에 사용된 균열방지 슬리브 및 보강재의 효과를 검증하기 위하여 실내시험 및 3차원 수치해석을 수행한 결과, 강관슬리브 및 보강재의 사용으로 패널의 전반적인 강도 증가와 균열억제 효과가 입증되었다.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.81-91
• /
• 2011

본 연구는 연속철근 콘크리트 포장(CRCP: Continuously reinforced concrete pavement)에서 단부 앵커러그 유무에 따른 종방향 변위 비교를 통해 앵커러그의 필요성을 분석하고 내부 수평균열의 수직방향 변위 측정을 통해 이러한 균열이 CRCP의 공용성에 미치는 영향을 분석하기 위하여 수행되었다. 앵커러그 구간 절단 전 거동 측정은 6월 중에 12일간 계측하였으며, 앵커 러그 구간 절단 후의 측정은 절단 시 슬래브에 급격히 발생하는 변위가 사라진 이후 8월 중에 14일 동안 계측하였다. 이와 같은 단기간의 계측 결과 CRCP 단부의 종방향 변위는 앵커러그가 설치되어 있는 경우에는 모든 위치에서 일일 변위 변화가 0.1mm 이내로 종방향 거동이 거의 발생하지 않았다. 단부에 앵커러그가 설치되지 않은 경우에는 변위가 자유 단부 부근에서만 주로 발생하며 종방향 변위 변화가 작아서 팽창줄눈으로 처리하여도 적절할 것으로 예측되었으나, 향후 추가연구에 의해 사계절 온도변화에 따른 단부의 거동을 확인할 필요가 있을 것으로 판단된다. 내부 수평균열은 거동 측정 결과 거의 비활성균열이며 전체적인 슬래브의 수직변위에 영향을 미치지 않았다. 따라서 수평균열이 슬래브를 상하로 분리시켜 CRCP의 구조적인 성능 및 공용성의 저하를 유발하지는 않을 것으로 분석되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.794-797
• /
• 2004

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions (-20, -10, 0, 5, 10, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about 4 type waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature after TAS test were observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. Also, correction coefficient of TAS with temperature were calculated using 4 type waterproofing membrane. It could be shown that the higher TAS and shear adhesive strength, the lower temperature, regardless of the type of waterproofing membrane. Temperature sensibility of TAS was especially remarkable in epoxy membrane. Failure type was occurred the ductile failure in $30^{\circ}C\;and\;40^{\circ}C$. From these results, it was shown that if ambient temperature above $30^{\circ}C$ maintains for a long time, waterproofing membrane will be deformed by softening. Otherwise, waterproofing membrane in temperature below $20^{\circ}C$ shown that occurred the brittle failure. From the results of visual observation of cutting surface for specimen, the thin waterproofing membranes shown indented by hot aggregate of the asphalt mixtures. Therefore, it could be known that the specification of waterproofing membrane thickness is necessary by waterproofing membrane type. As temperature change varied with pavement depth, the interface temperature was more important than ambient temperature in TAS test. Now, TAS test results were limited only in $-10^{\circ}C\;and\;20^{\circ}C$ temperature, but correction coefficient of TAS by ambient temperature could be used as a solution to deal with this problem.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1316-1323
• /
• 2005

Most tunnel lining material which has been used in the domestic is a concrete. But many problems as the construction period, the cost, and the crack occurrence for the design, construction, and management were happened in the concrete lining. For this reason, many research institutes like the Korea Highway Corporation recognize the necessity of an alternate material development and grow on the interest for that. So in this study, the behaviour characteristics for the application of the Corrugated Steel Plate Lining in cut-and-cover tunnel are evaluated as several conditions for the backfill height, the cutting slope, and the relative density of backfill soil are changed. In addition, through using that conditions, CHBDC(2000, Canadian Highway Bridge Design Code) is evaluated if it could be applied to the design by comparing with the numerical analysis results. As the behaviour characteristics of the Corrugated Steel Plate Lining by CHBDC and the static numerical analysis are analyzed, both the methods show the same linear increases of the compressive stress according to the increase of the backfill height. The CHBDC of the dead load condition has very similar tendency by comparing with the result of the static numerical analysis.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.233-247
• /
• 2005

Most tunnel lining material which has been used in the domestic is a concrete. But many problems as the construction period, the cost, and the crack occurrence for the design, construction, and management were happened in the concrete lining. For this reason, many research institutes like the Korea Highway Corporation recognize the necessity of an alternate material development and grow on the interest for that. So in this study, the seismic behaviour characteristics for the application of the Corrugated Steel Plate Lining in cut-and-cover tunnel are evaluated as several conditions for the backfill height, the cutting slope, and the relative density of backfill soil are changed. The compressive stress which is calculated in the Corrugated Steel Plate Lining by the seismic load is decreased as the backfill height increases and the cut slope grows gentle. Also, the moment shows the tendency of decrease according to the increase of the backfill height. But in the case of the relative density of the backfill soil is small, the moment increases according to the increase of the backfill height and affects the dynamic behaviour characteristic. So it is considered that the relative density of the backfill soil is also the important point. As the result in analyzing the seismic response characteristics of the reinforcement spacing of the Corrugated Steel Plate, the variation in the compressive force is hardly happened, but the moment and the shear force increase on the reinforcement spacing being narrow.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.33-42
• /
• 2017

PURPOSES : The purpose of this study is to suggest the construction and quality control method for the re-repair of a deteriorated partial depth repair for sections of Portland cement concrete pavement. METHODS : An experimental construction was conducted to extend the repair width for removing an existing repair section. A removal method was used to ensure early performance for a deteriorated partial depth repair section. Bond strength and split tensile strength were measured at the near vertical interface layer between the existing pavement and repair material. The area was analyzed for various conditions such as the extended repair area and the removing method of the existing repair section. RESULTS : As a result of analysis of bond strength and split tensile strength, the bonding performance of a milling removed section was improved over a cutting and hand breaker removed section. The bond strength was analyzed to increase slightly as the extended repair width for removing the existing repair section increased. The split tensile strength did not show a clear relationship to an increased extended repair width of an existing removed repair section. CONCLUSIONS : The milling removal method should be applied in the removal of existing deteriorated partial depth repair sections. The extended repair width for a re-repair section should be wider than the existing partial depth repair with at least a 75-mm length and width for the bond strength and the split tensile strength.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.1-9
• /
• 2013

PURPOSES : The PMS(Pavement Management System) has been utilized in order to efficiently allocate the limited budget for the maintenance of national highway system. In the PMS of national highway, surface pavement condition is evaluated by using the VI (Visual Index). However, the VI is determined only by considering the cracking rate (%) and rut depth (mm), which is not reflecting the IRI (International Roughness Index) that is known as an important factor of pavement performance. In this study, the NHPCI (National Highway Pavement Condition Index) which includes the cracking rate (%), rut depth (mm), and IRI (m/km) is suggested for determining the rehabilitation methods group. METHODS : First, the rehabilitation methods performed between 2008 and 2010 on the national highway is classified and then, NHPCI is determined for each rehabilitation method. Next, the NHPCI for each rehabilitation method is grouped through the interval estimation of the population mean and T-test analysis. RESULTS : According to NHPCI range, the rehabilitation methods are divided into four categories: Not Required, Preventive Maintenance, Overlay Treatment (with or without cutting), and Full-scale Treatment (i.e., reconstruction). CONCLUSIONS : Based on this study, it is recommended that the appropriate NHPCI range should be determined through the combination of the rehabilitation categories and Decision Procedure of Pavement Distress Condition Visual Index.