• 제목/요약/키워드: Concrete cover

검색결과 579건 처리시간 0.023초

비틀림 비정형 건물의 내진설계를 위한 우발편심 비틀림 증폭계수 검증 (Verification of the Torsional Amplification Factor for the Seismic Design of Torsionally Imbalanced Buildings)

  • 이광호;정성훈
    • 한국지진공학회논문집
    • /
    • 제14권6호
    • /
    • pp.67-74
    • /
    • 2010
  • 건물의 실제 편심은 일반적으로 계산된 값과 상당히 다르며, 정형 건물도 비틀림의 영향을 받는다. 질량분포의 비대칭성과 수직축에 대한 지반의 회전요소와 같은 요인들의 영향을 고려하고, 비틀림 비정형 건물의 취약성을 줄이기 위하여 내진설계규준에서는 우발편심과 비틀림 증폭계수를 도입하였다. 본 연구에서는 정형건물의 다양한 형상비와 평면중심으로부터의 부재위치에 따른 비틀림 증폭계수의 영향 및 이 계수에 영향을 미치는 요인을 확인하였고 보통암 지반에 위치한 다양한 편심과 형상비를 갖는 비선형 철근콘크리트 단층모델을 이용하여 비틀림 증폭계수를 검증하였다. 비선형 정적해석과 시간이력해석을 이용하여 구한 연약단부의 최대 정적변위와 동적변위는 비교적 일치하였으나 최대 정적비틀림과 동적비틀림의 차이는 편심크기가 작을수록 크게 나타났다. 1차 설계편심에 비틀림 증폭계수 적용유.무에 따라 연약단부 부재의 밑면전단력 증가가 미비하여 최대 정적변위의 증가비가 크지 않다.

Structure damage estimation due to tunnel excavation based on indoor model test

  • Nam, Kyoungmin;Kim, Jungjoo;Kwak, Dongyoup;Rehman, Hafeezur;Yoo, Hankyu
    • Geomechanics and Engineering
    • /
    • 제21권2호
    • /
    • pp.95-102
    • /
    • 2020
  • Population concentration in urban areas has led traffic management a central issue. To mitigate traffic congestions, the government has planned to construct large-cross-section tunnels deep underground. This study focuses on estimating the damage caused to frame structures owing to tunnel excavation. When constructing a tunnel network deep underground, it is necessary to divide the main tunnel and connect the divergence tunnel to the ground surface. Ground settlement is caused by excavation of the adjacent divergence tunnel. Therefore, predicting ground settlement using diverse variables is necessary before performing damage estimation. We used the volume loss and cover-tunnel diameter ratio as the variables in this study. Applying the ground settlement values to the settlement induction device, we measured the extent of damage to frame structures due to displacement at specific points. The vertical and horizontal displacements that occur at these points were measured using preattached LVDT (Linear variable differential transformer), and the lateral strain and angular distortion were calculated using these displacements. The lateral strain and angular distortion are key parameters for structural damage estimation. A damage assessment chart comprises the "Negligible", "Very Slight Damage", "Slight Damage", "Moderate to Severe Damage", and "Severe to Very Severe Damage" categories was developed. This table was applied to steel frame and concrete frame structures for comparison.

선설치앵커의 동적 전단하중에 대한 저항강도: 철근보강 앵커 (Shear Resistance of CIP Anchors under Dynamic Loading: Reinforced Anchor)

  • 박용명;강문기;노진경;주호중;강충현
    • 한국강구조학회 논문집
    • /
    • 제26권1호
    • /
    • pp.21-30
    • /
    • 2014
  • 본 연구에서는 헤어핀 보강 및 스트럽 보강 선설치앵커의 정적 및 동적 전단하중에 대한 저항강도 평가를 위한 실험을 수행하였다. 보강철근은 D6 이형철근을 사용하였으며 연단거리 120mm의 직경 20mm 앵커에 대해 정적 하중과 1Hz의 편진하중으로 각각 3개의 시험체에 대해 실험을 수행하였다. 헤어핀 보강 앵커는 헤어핀의 덮개가 강도에 직접 영향을 미치는 것으로 확인되었으며, 정적 대비 동적하중에서 강도의 저하는 없는 것으로 평가되었다. 스트럽 보강 앵커는 비보강 앵커에 비해 저항강도의 증가는 미소하였으며 동적하중에 의한 강도는 정적하중에 의한 강도와 거의 같은 값을 보였다.

반복하중을 받는 외부 보-기둥 접합부에 정착된 57mm 확대머리철근의 정착성능평가 (Evaluation on Anchorage Performance of 57mm Headed Bars in Exterior Beam-Column Joint under Cyclic Loading)

  • 정형석;정주홍;최창식;배백일;최현기
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권6호
    • /
    • pp.68-75
    • /
    • 2021
  • 본 연구에서는 반복하중을 받는 외부 보-기둥 접합부에 정착된 57mm 확대머리철근의 정착성능을 평가하였다. 총 4개의 외부 보-기둥 접합부 실험체를 계획하였으며, 콘크리트 압축강도, 측면피복두께, 횡보강근비 및 파괴유형을 주요 실험 변수로 설정하여 정착성능평가를 수행하였다. 성능평가 결과, 접합부에 정착된 대구경 확대머리철근의 정착성능에 가장 큰 영향을 주는 요소는 측면피복두께 및 횡보강근으로 나타났으며, 외부 보-기둥 접합부에 정착된 57mm 대구경 확대머리철근은 반복하중하에서도 충분한 정착성능이 발현되는 것을 확인할 수 있었다.

Natural radioactivity level in fly ash samples and radiological hazard at the landfill area of the coal-fired power plant complex, Vietnam

  • Loan, Truong Thi Hong;Ba, Vu Ngoc;Thien, Bui Ngoc
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1431-1438
    • /
    • 2022
  • In this study, natural radioactivity concentrations and dosimetric values of fly ash samples were evaluated for the landfill area of the coal-fired power plant (CFPP) complex at Binh Thuan, Vietnam. The average activity concentrations of 238U, 226Ra, 232Th and 40K were 93, 77, 92 and 938 Bq kg-1, respectively. The average results for radon dose, indoor external, internal, and total effective dose equivalent (TEDE) were 5.27, 1.22, 0.16, and 6.65 mSv y-1, respectively. The average emanation fraction for fly ash were 0.028. The excess lifetime cancer risks (ELCR) were recorded as 20.30×10-3, 4.26×10-3, 0.62×10-3, and 25.61×10-3 for radon, indoor, outdoor exposures, and total ELCR, respectively. The results indicated that the cover of shielding materials above the landfill area significantly decreased the gamma radiation from the ash and slag in the ascending order: Zeolite < PVC < Soil < Concrete. Total dose of all radionuclides in the landfill site reached its peak at 19.8 years. The obtained data are useful for evaluation of radiation safety when fly ash is used for building material as well as the radiation risk and the overload of the landfill area from operation of these plants for population and workers.

굽힌 후 편 철근의 겹침 이음 및 기계적 이음을 갖는 벽-슬래브 접합부의 반복하중에 대한 거동 (Cyclic Behavior of Wall-Slab Joints with Lap Splices of Coldly Straightened Re-bars and with Mechanical Splices)

  • 천성철;이진곤;하태훈
    • 콘크리트학회논문집
    • /
    • 제24권3호
    • /
    • pp.275-283
    • /
    • 2012
  • 초고층 건축물의 선행 코어 후행 슬래브 접합부, 지하 연속벽과 바닥구조의 접합부, 임시 개구부 등 신구 콘크리트 접합부의 철근 이음을 위하여, 다수의 커플러를 전단키가 있는 얇은 강판에 설치한 철근 이음용 매립 강판이 최근 개발되었다. 이 공법을 사용한 접합부의 구조 성능을 검증하기 위하여, 벽체-슬래브 접합부에 대한 반복하중 실험을 실시하였다. 비교를 위해 기존에 사용되는 굽힌 철근 박스를 이용한 접합부와 이음이 없는 접합부도 함께 실험하였다. 실험 결과 철근 이음용 매립 강판을 사용한 접합부는 이음이 없는 접합부와 동일하게 [인장철근 항복]-[충분한 휨변형]-[압축 콘크리트 압괴] 후 압축 철근의 좌굴로 파괴되었다. 따라서 설계에서 가정한 충분한 연성 거동을 확인할 수 있었다. 반면, 굽힌 철근 박스를 사용한 접합부의 경우, 탄성구간에서는 철근 이음용 매립 강판과 유사하게 거동하였으나, 측면 피복 콘크리트가 빨리 탈락되었으며, 슬래브 상하부면의 겹침이음 구간에 부착 균열이 다수 발생하였다. 최종적으로 이음 없는 실험체 및 철근 이음용 매립 강판을 사용한 실험체에 비해 강도와 변형능력이 저하되었다. 또한 굽힌 후편 철근을 겹침이음한 실험체가 철근 이음용 매립 강판을 적용한 경우에 비해 강성 저하가 빠르게 진행되었다. 굽힌 후편 철근의 탄성계수는 직선 철근에 비해 낮고, 완전한 직선으로 펼 수 없기 때문에 인장력을 받으면서 일부 구간이 펴지므로 접합부의 강성을 저하시킨 것으로 판단된다. 2종류의 철근 지름(D13, D16)과 강종(SD300, SD400)에 대해, 철근이음용 매립 강판을 적용한 접합부는 공칭 강도를 충분히 상회하였다. 그러나 굽힌 후 편 철근을 사용하면 강종이 높을수록 그리고 지름이 굵을수록 휨강도가 저하되었다. 따라서 굽힌 후 편 철근의 사용에 주의가 필요하다.

공간정보 모델링을 이용한 원전 사고의 환경 영향 평가: 체르노빌 사례연구 (Environmental Impact Assessment of Nuclear Power Plant Accident using Spatial Information Modeling: A Case Study of Chernobyl)

  • 이상원;송아람;박노욱
    • 대한원격탐사학회지
    • /
    • 제28권1호
    • /
    • pp.129-143
    • /
    • 2012
  • 이 논문은 1986년에 발생한 체르노빌 원전 사고 사례연구를 통해 환경 모니터링과 영향 평가를 위한 고급 공간정보 모델링 기술의 유용성을 예시하였다. 사고지점 주변에서 1986년과 1992년에 촬영된 Landsat TM 영상자료를 대상으로 선분류 후비교법을 적용하여 변화가 크게 일어난 지역과 토지피복 변화 양상을 분석하였다. 그리고 이 사고의 가장 큰 피해지역으로 알려진 벨로루시 지역을 대상으로 다양한 크리깅 기법을 포함한 공간 모델링 기법을 적용하여 토양 내 세슘 농도와 갑상선 암 발병률 자료와의 상관성을 분석하였다. 변화 탐지 결과, 농경지 면적의 감소와 황무지 면적의 증가가 가장 뚜렷하게 나타났고, 방사능 오염의 확산을 막기 위한 콘크리트 구조물들이 새롭게 생겨난 것을 확인할 수 있었다. 벨로루시 지역의 영향평가 결과, 세슘 오염이 심한 원전 인근 지역에서 포아송 크리깅에 의해 추정된 위험도가 상대적으로 높게 나타났다. 세슘 농도와 사고지점과의 거리를 독립 변수로 사용하여 이 변수들의 공간 변화 양상을 반영할 수 있는 지리적 가중 회귀분석을 적용하였다. 적용 결과, 갑상선 암 위험도와 상관계수 0.98을 나타내는 갑상선 암 발병 위험도 추정이 가능하였으며, 이는 원전 사고가 갑상선 암 발병 위험도에 영향을 준 것을 의미한다. 결론적으로 이 연구에서 적용한 공간정보 모델링 기법들은 환경 영향 평가 및 환경 보건 분야에서 유용하게 사용될 수 있을 것으로 기대된다.

볼트접합 앵글을 사용한 합성기둥의 중심축 압축실험 (Axial Load Test of Prefabricated Composite Columns Using Bolt-connected Steel Angles)

  • 김현진;황현종;박홍근;김동관;양종민
    • 한국강구조학회 논문집
    • /
    • 제29권2호
    • /
    • pp.147-158
    • /
    • 2017
  • 본 연구에서는 볼트조립 앵글을 적용한 선조립 합성기둥(이하 PSRC 합성기둥)의 압축성능을 연구하였다. 2/3 축소비율의 PSRC 기둥실험체 4개와 기존 SRC 기둥실험체 2개에 대하여 중심축 압축실험을 수행하였다. 횡보강재의 수직간격 및 단면형상과 앵글의 단면형상을 실험변수로 고려하였다. 실험결과, PSRC 기둥실험체는 기존 SRC 기둥실험체와 비교하여 비슷한 압축하중 재하능력 및 변형능력을 발휘하였다. PSRC 합성기둥의 경우, 횡방향 강판의 좁은 횡보강 간격과 Z형 단면의 강판이 압축강도 및 변형능력 향상에 효과적인 것으로 나타났다. 또한 PSRC 합성기둥은 현행설계기준에 의한 공칭 압축강도보다 큰 압축하중 재하능력을 나타내었다. 실험체들에 대한 수치해석결과는 피복 콘크리트 탈락으로 인한 하중감소를 제외하고 초기강성 및 하중재하능력을 비교적 잘 예측하였다.

공간정보기반의 행정경계 정비를 위한 기초연구 (A Fundamental Study on the Maintenance of Administrative Boundaries based on Spatial Information)

  • 윤지예;박홍기;최윤수;남대현
    • Spatial Information Research
    • /
    • 제20권1호
    • /
    • pp.47-57
    • /
    • 2012
  • 행정경계는 지리적 지역적 범위를 표현하는 행정업무의 기반정보이다. 스마트세상이 도래한 요즈음 산업체의 다목적 활용 및 국민의 생활편의 측면에서 그 중요성이 증대되고 있으나 현재 행정구역체계의 골격인 지적공부에 정비된 경계선 간 중첩 혹은 이격문제가 내재되어 있어 정비가 시급한 상황이다. 그러나 국가가 일정한 방법 및 절차의 공시 없이 행정경계를 일괄 정비 등록할 경우, 각 지자체 및 관할부서 간의 갈등을 야기할 우려가 있다. 따라서 행정경계 갈등의 사전 예방과 원활한 정비를 위해서는 합리적인 행정경계 정비방안이 우선 마련되어야 한다. 본 연구에서는 실제적 정비업무 시 활용이 가능하도록 행정경계 정비방안과 정비절차를 제시하였다. 이를 위하여 행정경계의 개념과 특성, 연혁과 현황 고찰 및 현황에 내재된 문제점을 파악한 후 현장답사를 수행하였으며, 현장결과를 기반으로 시사점을 도출하였다. 이후, 합리적으로 행정경계를 확인 정비할 수 있도록 다양한 공간정보자료의 활용, 이해관계자의 참여, 인접 구(區)간 행정경계 정비안을 제시하였다. 이로써, 현행 행정경계 정보의 불일치성을 해소하고, 합리적 행정경계의 정비가 가능할 것으로 사료된다. 또한, 향후 지적 재조사사업에 있어서 본 정비 방안의 활용이 가능할 것으로 판단된다.

한국 한의학교육의 발전방안 (Ways to Educational Improvement of Korean Oriental Medicine)

  • 이선동;한용주;신규원
    • 대한예방한의학회지
    • /
    • 제8권2호
    • /
    • pp.99-113
    • /
    • 2004
  • Problems and current situation of public health globally and domestically were analyzed in this study and based on these findings, ways to improve from western medicine and Oriental medicine can be deduced as follows: 1. Current problems of public health in Korea and the world 1) Increase of diseases resulted from daily habits and infectious diseases, many are at the brink of being ill. Quality of life from extended life span and unbalanced health care must be solved. 2) Natural and societal factors including host factors, public health service, and other external and internal factors play an important role in deciding healthy and being ill. 3) Some of the limits and problems of modem medicine include insufficient academic knowledge and incomplete theory, as well as misled approach to the treatment. Human itself isn't perfect organism and other realistic problems hinder one's well-being. 4) Regardless of western medicine or Oriental medicine, patients were approached as someone with diseases and disorders, and wholistic approach was disregarded. Lack of clinical training, absence of clear educational philosophy and goal are some of the reasons why the education isn't under concrete system 2. Important factors for the medical education and proper direction for the education of Oriental medicine 1) Important factors for medical education - Education should not be limited on the human health and illness, but also cover qualities such as well-being, social welfare, service, and happiness. Every aspects of human life must be considered and attended for more productive outcome. - Basic understanding of humanity must be included in the educational curriculum - Foundation of human diseases and pain are associated with inner life and surrounding causes including family, society, nature, race, culture, religion, politics, and etc., thus the education must be approached to recognize aforementioned criteria. 2) Proper direction for the education of Oriental medicine - Values of Oriental medicine for medical principles and importance of lifehood must be educated. - Educational goal, limits, and levels must be established for the school of Oriental medicine - Respect for life must be the top priorities of educational direction which should lead to solution based education for the human health. Latest medical theory and technology should be accommodated as well as prevention, treatment, and balancing of basic courses and clinical training for optimal education.

  • PDF