• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.101-114
• /
• 2007

줄눈 콘크리트 포장에서 다웰바는 하중을 전달해주는 역할과 단차를 감소시켜줌으로써 궁극적으로 포장의 공용성을 높여주는 역할을 수행한다. 그러나 다엘바의 시공상태가 불량할 경우에는 오히려 줄눈잠김 등을 유발하여 스폴링이나 균열을 초래하여 공용성을 떨어뜨릴 수 있다. 다웰바의 시공방법은 다웰바 어셈블리 시공방법과 다웰바자동삽입기를 이용한 시공방법이 있는데 국내에서는 어셈블리를 이용한 시공방법만이 사용되고 있다. 본 연구에서는 비파괴 조사장비인 MIT-SCAN2를 이용하여 한국도로공사 시험도로에 시공된 다웰바자동삽입 시공구간과 다웰바 어셈블리 시공구간에 대한 다웰바 시공상태 및 Joint Score와 Running Ave. Joint Score를 산출하여 비교 분석해 보았다. 그 결과, 다웰바자동삽입 시공방법이 다웰바 어셈블리 시공방법에 비해 깊이변화, 수평/수직엇갈림에서 매우 우수한 시공상태를 보이는 것으로 나타났으며 줄눈잠김의 위험 또한 다웰바 어셈블리 시공방법에 비해 매우 낮다는 점을 발견했다. 또한 국내 다웰바 어셈블리 시공방법의 문제점을 다웰바 어셈블리의 생산, 보관, 시공 측면에서 분석하였다. 문제점 분석을 토대로 다웰바의 체어형태, 고정방법을 개선하여 시험시공을 수행한 결과, 모든 시공상태 항목이 개선되었음을 알 수 있었으며, 특히 수평/수직엇갈림이 크게 개선되어 줄눈잠김에 대한 위험성이 줄어듦을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.86-89
• /
• 2003

It is recognized that reinforcement corrosion is the main distress behind the present concern regarding concrete durability. In this study, to confirm corrosion of reinforced concrete affected by thickness of cover, kinds of surface coating, measured electric potential, ratio of corrosion area, weight reduction, corrosion velocity of steel bar under environment of complex deterioration. The results showed that an increase in age also increases corrosion of steel bar. Ratio of corrosion area is largely related to ratio of weight reduction. as well, corrosion of steel bar by thickness of cover is superior to l0mm thick than 20mm thick. It showed that an increase in thickness of cover prevent steel bar from deteriorating. The results of this study showed that corrosion velocity was affected by thickness of cover, kinds of surface coating. data on the development of corrosion velocity made with none, organic B, organic A, inorganic B, and inorganic A is shown.

• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.469-478
• /
• 2003

The primary aim of this study was to investigate the bond strength between reinforcement and concrete. Large sized nine beams, which were produced from concrete with approximately ${f_c}^{\prime}=30$ MPa, were tested. Each beam was designed to include two bars in tension, spliced at the center of the span. The splice length was selected so that bars would fail in bond, splitting the concrete cover in the splice region, before reaching the yield point. In all experiments, the variable used was the reinforcing bar diameter. In the experiments, beam specimens were loaded in positive bending with the splice in a constant moment region. In consequence, as the bar diameter increased, bond strength and ductility reduced but, however, the stiffnesses of the beams (resistance to deflection) increased. Morever, a empirical equation was obtained to calculate the bond strength of reinforcement and this equation was compared with Orangun et al. (1977) and Esfahani and Rangan (1998). There was a good agreement between the values computed from the predictive equation and those computed from equations of Orangun et al. (1977) and Esfahani and Rangan (1998).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.201-206
• /
• 2002

The purpose of this study is to improve the anti-corrosive properties of coated reinforcing bar using polymer cement slurry. Poymer cement slurry are prepared with three types of polymer dispersions and corrosion inhibiting admixture. And tested for corrosion accelerating tests such as immersion in NaCl 10% solution NaCl 10% solution spray, high temperature and pressure steam in condition of 8cycles, carbonation before and after, penetration of NaCl solution. From the test results, it is concluded that the anti-corrosive properties are considerably improved by coating using polymer cement slurry at surface of reinforcing bar. And this trend is marked by adding of corrosion inhibiting admixture. The difference of the anti-corrosive properties is hardly recognized according to types of polymer dispersions. The anti-corrosive properties of coated reinforcing bar using polymer foment slurry are improved to a great extent compared to those of plain reinforcing bar accordiy to increasing content of chloride ion in cement concrete.

• Structural Engineering and Mechanics
• /
• 제90권1호
• /
• pp.71-81
• /
• 2024

Fiber Reinforced Polymer (FRP) bars have now been widely adopted as an alternative to traditional steel reinforcements in infrastructure and civil industries worldwide due variety of merits. This paper presents a numerical methodology to investigate FRP bar-reinforced beam-column joint behavior under quasi-static loading. The proposed numerical model is validated with test results considering load-deflection behavior, damage pattern at beam-column joint, and strain variation in reinforcements, wherein the results are in agreement. The numerical model is subsequently employed for parametric investigation to enhance the end-span beam-column joint performance using different joint reinforcement systems. To reduce the manufacturing issue of bend in the FRP bar, the headed FRP bar is employed in a beam-column joint, and performance was investigated at different column axial loads. Headed bar-reinforced beam-column joints show better performance as compared to beam-column joints having an L-bar in terms of concrete damage, load-carrying capacity, and joint shear strength. The applicability and efficiency of FRP bars at different story heights have also been investigated with varying column axial loads.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.270-273
• /
• 2006

Bond between reinforcing bar and the surrounding concrete is made up of three components. There are chemical adesion, friction, and mechanical interaction between the rib of the bar and the surrounding concrete. bond of deformed bars depends primarily on the beraing of rib deformation anainst the surrounding concrete. The final objective of the study is to enhance structural stability, and workability thorough increasing the bond strength between deformed bar and surrounding concrete. The results of this study will be used to shorten bond and development length by $20{\sim}30$ percent and it will facilitate to use of high strength and high-relative rib area bars.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.127-131
• /
• 2017

This paper presents a generalized formulation for optimizing the design of concrete beam reinforced with glass fiber reinforced polymer bar. The optimization method is formulated to find the design variables leading to the minimum weight of concrete beam with constraints imposed based on ACI code provisions. A simple genetic algorithm is utilized to solve the optimization task. The weights of concrete and glass fiber reinforced polymer bar are included in the formulation of the objective function. The ultimate limit states and the serviceability limit states are included in formulation of constraints. The results of illustrated example demonstrate the efficiency of the proposed method to reduce the weight of beam as well as to satisfy the above requirement. The application of the optimization based on the most economical design concept have led to significant savings in the amount of the component materials to be used in comparison to classical design solutions.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2012

PURPOSES: The purpose of this study is to compare the alkali-silica reactivity for mortar bar and concrete prism specimens using crushed aggregates of 5 types in Korea. And the alkali-silica reactivity for those aggregates are measured by chemical test method. METHODS: The alkali-silica reactivity for those aggregates was measured by chemical test method of KS F 2545, mortar-bar test of KS F 2546, accelerated mortar-bar test method of ASTM C 1260 and concrete prism test method of ASTM C 1293, relatively. RESULTS: The alkali-silica reactivity for those aggregates was verified by chemical test of KS F 2546 and accelerated mortar-bar test of ASTM C 1260. However, it was not by mortar-bar test of KS F 2546 and concrete prism test of ASTM C 1293. CONCLUSIONS: The above results showed that relationship among the four test methods were very low. The results from 3 types of test methods using cement-aggregate combinations appeared to be different. Because the environmental conditions of test methods for measuring the alkali-silica reactivity such as equivalent alkali content(external source), humidity, temperature, and times were different though the aggregates were same. Moreover, alkali-silica reactivity showed the biggest impact when alkalis were supplied form outside and exposed to environmental conditions. The accelerated mortar-bar test method seems to be most appropriate test method for concrete structures exposed to alkali environment.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.77-85
• /
• 2011

The use of headed bars as opposed to standard 90- or 180-degree hooked bars in beam ends, beam-column joints or other steel congested areas for anchorage and bond has become more favorable due to the fact that steel congestion is often created by large bend diameters or crossties. This research mainly focuses on evaluating the code provisions regarding the use of headed bars. Nine simply supported rectangular concrete beams with headed longitudinal reinforcement were tested under a four-point monotonic loading system. The design clear spacing, which varies from 1.5 to 4.25 times the bar diameter, was the only parameter for the experimental investigation. The test results showed that the closely-spaced headed bars were capable of developing to full yield strength without any severe brittle concrete breakout cone or pullout failure. Bond along the bar was not sufficient due to the early loss of concrete integrity. However, the headed bars were effective for anchorage with no excessive moment capacity reduction. This implies that the clear spacing of about 2 times the bar diameter for headed bars may be reasonable to ensure the development of specified yield strength of headed bars and corresponding member design strength.

• 대한토목학회논문집
• /
• 제29권3A호
• /
• pp.259-266
• /
• 2009

본 연구에서는 전단보강이 없는 FRP 보강근을 사용한 콘크리트 보의 제작 및 파괴실험을 통하여 FRP bar와 철근의 탄성계수비, 휨보강근비 및 전단지간비의 영향을 동시에 고려하여 콘크리트 전단강도를 평가할 수 있는 수식을 제안하였다. 실험변수로서 2종류의 FRP bar, 3종류의 전단지간비 및 3종류의 휨보강근비를 사용하였으며, 총 36개의 FRP 보강근을 사용한 콘크리트 보를 제작하고 4점 휨 실험을 수행하였다. 전단지간비의 영향을 상세히 분석하기 위하여 앞서 연구된 2종류의 전단지간비에 대한 실험결과를 인용하였다. 실험자료들을 회귀분석하여 콘크리트 전단강도 계산에 필요한 전단강도보정계수를 구하는 수식을 제안하였다. 제안된 수식의 검증을 하기 위하여 여러 문헌으로부터 조사된 31개의 실험결과에 대하여 본 연구의 제안식과 다른 연구자들이 제안한 수식들을 함께 적용하여 비교 분석하였다. 그 결과, 본 연구에서 제안된 수식은 실험결과에 가장 근접하는 결과를 주는 것을 알 수 있었다.