• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.499-502
• /
• 2005

Nowadays, the stripping work of form has generated some problems such as increasing total constructing cost result from delayed work schedule by the stripping work of form and environmental issues by wasting the debonded form. According to recent research for form work, it has studied about permanent form to solve economic and environmental problem which is commented above. In this study, high performance permanent form method was developed and tested by adopting COM and TEN specimens adopted on the Compression and Tensile section then the structural behaviour was investigated. In the test result, the specimen adopted the form showed better structural performance than control specimen in the point of ductility, failure mode and ultimate load.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.836-839
• /
• 1999

Glossy architectural concrete means high qulity concrete which develops marble-like gloss on the surface of concrete. In spite of many benefits of architectural concrete to R.C. structure such as appearance of natural stone, saving of envelope materials and reduction of building weight, the failure of in-situ application of architectural concrete by the absence of knowledge on the physical properties and form work for it can often be found in Korea. This study is to offer the basic materials on the mix proportion, vibrating, curing and treatment of concrete result from the mock up test and in-situ application of architectural concrete to embody high quality architectural concrete in Korea.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.369-379
• /
• 2020

Reduction of disposal of waste materials due to construction demolition has become a great concern in recent decades. The research work presents the hardened properties of concrete where the partial substitution of recycled coarse aggregate with natural aggregate in amount of 0%, 10%, 30% and 50%. By using different mixed proportions, fresh and hardened properties of concrete were conducted for this investigation. These properties were compared with control concrete. It can be seen that all of the hardened properties of concrete were decreased with the increasing percentage of recycled aggregate in concrete mixes. It was noticed that up to 30% recycled aggregate replacement can be yielded the optimum strength when it used in normal concrete. Finally, it can be said that disposed recycled concrete utilizing as a partial replacement in natural aggregate is a great way to reuse and reduce environmental hazards which achieve sustainability approach in the construction industry.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.557-560
• /
• 2008

샌드위치 패널은 전세계적으로 건축공사 전반에 걸쳐 매우 다양한 용도로 활용되고 있다. 우리나라의 경우 유기재료를 심재로 사용한 폴리스틸렌 패널 등을 사용함에 따라 화재에 의한 심재의 용융이나 강판의 변형 등 화재에 매우 취약하고, 유독가스 발생 등에 따른 문제점이 부각되면서 난연또는 불연성능의 확보가 반드시 필요하다. 따라서 이러한 문제점을 해결하고자 샌드위치 패널 심재용 경량기포콘크리트의 최적배합을 도출하여 샌드위치 패널 심재에 적용하고자 한다.본 연구에서는 기포콘크리트를 샌드위치 패널 심재로 활용하기 위하여 기존의 기포방식인 기포제를 첨가하여 경량화 시키는 방식과는 전혀 다른 방식으로 콘크리트 초경량화를 위해 여러 가지 화학반응에 의한 기포 발생 유도 메커니즘을 규명하였다. 그 중 과산화수소($H_2O_2$)를 첨가하여 반응시 발열(發熱)을 유도하고, 콘크리트 기포발생 유도를 극대화시켜 초경량화를 이루기 위한 최적배합 도출 및 폐자재를 활용한 샌드위치 패널 심재용 경량기포콘크리트 충전성 검토, 소요강도 확보가능 여부 등의 다양한 실험을 통해 물리적 역학적 특성을 알아보고자 하였다.

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.339-345
• /
• 2013

이 연구는 200000 $m^3$의 용량을 갖는 지하식 LNG 저장탱크의 지붕 콘크리트에 대한 요구성능 및 이에 따른 콘크리트의 최적배합비를 도출하고, 현장시공의 자료로 제안하기 위한 것이다. 지붕 콘크리트는 돔형 지붕의 경사기울기에 따라 굳지 않은 콘크리트의 시공성 및 충전성이 요구된다. 또한, 1.4~0.6 m의 지붕두께를 고려한 수화열 저감과 콘크리트 타설 후의 프리스트레싱 작업 및 air support의 제거공정에 따른 단계별 압축강도의 확보가 중요한 요구성능이다. 이러한 조건을 고려하여 지붕의 기울기가 $20^{\circ}$ 미만일 경우에는 슬럼프 $100{\pm}25$ mm, $20^{\circ}$ 이상일 경우에는 $150{\pm}25$ mm로 선정하였으며, 경시변화 60분을 만족해야 한다. 특히, 91일 재령의 설계기준강도 30 MPa, 프리스트레싱 작업시 7일 재령의 압축강도 10 MPa, air support 제거공정에서 21일 재령의 압축강도 14 MPa을 만족해야 한다. 석회석 미분말의 최적 치환율은 구속시험 결과에 따라 정하였으며, 주요 배합변수는 물-시멘트비, 잔골재율 및 고성능 AE감수제의 첨가율 등이다. 배합시험 결과, 저열 포틀랜드 시멘트 및 석회석 미분말을 사용한 지붕 콘크리트의 최적배합 조건은 석회석 미분말의 최적 치환율 25%(내할), 물-시멘트비 57.8%, 잔골재율 42.0%로 나타났으며, 공기량 및 슬럼프의 시험결과도 경시변화 60분까지 성능을 만족하였다. 또한, 단열온도 상승시험의 결과, 단열온도 상승양($Q{\infty}$)이 $26.3^{\circ}C$, 상승속도(${\gamma}$) 0.58로 선행탱크(TK-13,14)와 비교해 볼 때 매우 낮게 나타나 수화열 저감의 효과를 기대할 수 있다. 이러한 요구성능 및 최적배합 조건을 만족하는 설계기준강도 30 MPa(배합강도 36 MPa)의 지하식 LNG 저장탱크의 지붕 콘크리트용으로 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.151-156
• /
• 2001

Concrete has excellent characteristics as building material and functions relatively well; but it has many problems concerning too heavy weight of the structures. Accordingly, it is the assignment for study in the part of building materials to lighten and high strengthen the weight of concrete structures in order to improve those weak Points; and it seems one of the representative solutions to develop the high strength lightweight aggregate concrete. Based on the experimental results presented, the following conclusions are drawn. The concrete with unit weight of 1.96~2.03t/$m^{2}$, compressive strength of 322~431kgf/$cm^{2}$ was gained. So, it appears that the lightweight aggregate concrete will be useful for low unit weight and high strength lightweight aggregate concrete. In the end, to manufacture artificial lightweight aggregate concrete for construction work is necessary to develope artificial aggregate which has improved performances physically.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.5-10
• /
• 1993

Recently, owing to efficiency of the concrete work and the rationalization of construction structures, concrete is required to be super high strength. Furthermore, it is take a growing interest in execution and manufacture for super high strength concrete. This study is to investigate and analyze the influenced of flyash affecting on workability and engineering properties of super high strength concrete. In this experiment, the 28day's compressive strength of concrete using 15mm size of aggregate and flyash is over 800㎏/㎠ in the 20°/wt of water∼cement ratio. And the concrete using flyash have higher tensile strength than plain concrete.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.171-177
• /
• 1995

Fracture mechanics does work for concrete, provided that one uses a proper, nonlinear form of fracture mechanics in which a finite nonlinear zone at fracture front is being considered. The fracture process zone is a region ahead of a traction-free crack, and the development of model of fracture process zone is most important to describe fracture phenomena in concrete. This paper is about fracture behavior of concrete cylinder under lateral pressure. Concrete cylinders were made of high strength normal connote, steel fiber reinforced concrete and steel fiber reinforced polymer-impregnated concrete and concrete and the fracture behavior such as cracking propagation and ultimate load are observed. The fracture process zone is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve and are implemented to the boundary element technique for the fracture analyses of the cylinders. The experimental results are compared with analysis results and tension-softening curves for the steel fiber reinforced concrete and steel fiber reinforced polymer-impregnated concrete are obtained by back analyses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.143-147
• /
• 1992

Description of the behavior of the R.C structural members fixed on massive concrete is not normally generalization of recognized configuration for regular R.C. design guidanes. This can be due to the complexity of evaluation of internal resistancy and deflection changes of the members subjected to the various external forces. On the base of axially loaded member fixed on footing, however, the estimation of deflection changes due to flexural force shear force and rotational force is to be carried out in ways of specifying the bond characteristics of axial bars embedded in massive concrete. This work is to quantify adhesion of steel-concrete, initial concrete cracking stress near bar rib, maximum bond stress and residual stress in concrete respectively. In addition to quantification of them for particulate behavior, the suggestions of multi-linear bond stress-slip diagram made in carrying out finite element analyses for adhesion failure, examining concrete cracking status and reviewing existing experimental data lead to alternatively constructed relationship between bond stress and slip for a axial bars embedded massive concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.118-123
• /
• 1997

The strength development of Flyash concrete containing various amount of Flyash (0, 10, 30, 50%) using as a cement replacement material was investigated two types of curing conditions, namely water curing at $21^{\cire}C$ and steam curing at $25^{\cire}C$ were adopted for this work, in water curing the strength development of Flyash concrete was always inferior to that of OPC (Ordinary Portland Cement) concrete at early ages, although the differences were dependant up percentage of Flyash. The strength of Flyash concrete based on equivalent strength development at 28 days was also tested and the results exhibited that the strength was improved at early days, specially, the concrete containing 30% of Flyash, in steam curing for the same mix(270kg/$\textrm{cm}^2$) the strength of Flyash concrete similar to that of OPC concrete, in other words. Flyash was strongly influenced by curing temperature in the strength development.