• Steel and Composite Structures
• /
• 재36권6호
• /
• pp.657-669
• /
• 2020

This study investigates the fire resistance characteristics of reactive powder concrete according to changes in the cement content per unit area, mixing ratio of metakaolin (MK), and content of polypropylene fiber. A fire test was conducted, and the resulting residual strength characteristics were investigated through flexural and compressive strength measurements, as well as condition rating classification based on visual evaluation. MK effectively reduced the initial high content of calcium hydroxide, thereby reducing the water vapor pressure generated during pyrolysis and slowing spalling. Furthermore, the pore structure and loose tissue were effective for relieving the water vapor pressure in the event of a fire.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.293-302
• /
• 2017

This study deals with a numerical investigation of load transfer along interfaces of jacketed columns using finite element models. Appropriate plasticity and constitutive models are used to simulate the response of concrete and steel bars. Experimental data were used to calibrate the simulation of mechanical characteristics. The different compressive strength of core and jacket concrete, the confinement ratio, the dowels' diameter size and the load pattern shapes were considered. The path diagrams along the interfaces elucidate the areas around the dowel bars where due to stress concentration plastic hinges and intense discontinuities are created. The stress flow also depicts the contribution of confinement of the jacketed area to the overall resonant load capacity of the core column. The scope of the research is to identify and quantify the shear transfer along the interfaces of strengthened elements.

• 한국지진공학회논문집
• /
• 제23권3호
• /
• pp.169-181
• /
• 2019

Seismic performance of ordinary reinforced concrete shear wall systems commonly used in high-rise residential buildings is evaluated. Three types of shear walls exceeding 60m in height are designed by performance-based seismic design. Then, incremental dynamic analysis is performed collapse probability is assessed in accordance with the procedure of FEMA P695. As a result, story drift, plastic rotation, and compressive strain are observed to be major failure modes, but shear failure occur little. Collapse probability and collapse margin ratio of performance groups do not meet requirement of FEMA P695. It is observed that critical wall elements fail due to excessive compressive strain. Therefore, the compressive strain of concrete at the boundary area of the shear wall needs to be evaluated with more conservative acceptance criteria.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.203-204
• /
• 2023

Recycled aggregate is an aggregate that satisfies the quality as an aggregate by crushing waste concrete and passing it through a separator. The government grants a floor area ratio of up to 15% and building height mitigation when more than 25% of the recycled building materials are used. In addition to environmental protection issues, it is necessary to actively utilize recycled aggregates that meet the standards to secure the business feasibility of buildings. This study attempted to derive the results according to the substitution rate by measuring the chloride ion diffusion characteristics based on the electrophoresis method.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.803-810
• /
• 2007

FRP 합성재료로 구속된 콘크리트의 응력-변형률 응답을 합리적으로 예측할 수 있는 해석 모델이 제시되었다. 제안된 모델은 하중이 증가함에 따라 점진적으로 발생하는 미세균열에 의한 부피팽창이 미세 재료 구조의 손상을 나타내는 중요한 척도이며, 이에 손상 정도에 따라 하중 지지 능력을 일관되게 산정할 수 있다는 기본 개념에 근거한다. 이를 위하여 제안 모델은 면적 변형률 및 공극의 함수로 표시된 탄성계수, 팽창 콘크리트와 구속 매체의 상호작용을 나타내는 에너지 평형식, 변화하는 구속력 및 점증 계산 논리를 포함한다. 따라서 실험으로부터 유도된 팽창비 관계식으로부터 횡방향 혹은 부피팽창변형률을 산정하는 기존의 해석 모델과는 달리 역학적 거동 및 에너지 평형식으로부터 연속적으로 변화하는 횡방향 변형률을 산정한다. 구속된 콘크리트의 전체 응답을 예측할 수 있는 기존의 여러 해석 모델에 대하여 검토하였으며, 특히 부피 팽창을 고려하는 방법에 초점을 맞추어 토의하였다. 제안된 모델 및 기존 Samaan의 2선식 모델을 사용하여 실험 결과를 예측한 결과, 만족할 만한 범위 내에서 일치를 나타냈으나, Samaan의 2선식 모델은 부피 팽창 거동을 위하여 단지 초기 포아송비와 최종 수렴 팽창변화율 만을 고려하기 때문에 횡방향 변형률 응답을 예측하는 데는 한계가 있는 것으로 판단된다. 제안된 모델은 역학적 거동에 근거하여 다양한 관련 응답을 산정하므로 다른 분야에도 쉽게 적용할 수 있다.

• Corrosion Science and Technology
• /
• 제16권4호
• /
• pp.175-182
• /
• 2017

Galvanic current measurement, polarization curves, electrochemical impedance spectroscopy and weight loss test were used to study the corrosion behavior of carbon steel before and after carbon fibers coupling to the carbon steel in simulated concrete pore solutions, and the film composition on the steel surface was analyzed using XPS method. The results indicate that passive film on steel surface had excellent protective property in pore solutions with different pH values (13.3, 12.5 and 11.6). After coupling with carbon fibers (the area ratio of carbon steel to carbon fiber was 12.31), charge transfer resistance $R_{ct}$ of the steel surface decreased and the $Fe^{3+}/Fe^{2+}$ value in passive film decreased. As a result, stability of the film decreased and the corrosion rate of steel increased. Decreasing of the area ratio of steel to carbon fiber from 12.3 to 6.15 resulted in the decrease in $R_{ct}$ and the increase in corrosion rate. Especially in the pore solution with pH 11.6, the coupling leads the carbon steel to corrode easily.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권7호
• /
• pp.9-15
• /
• 2019

본 연구의 목적은 영상 처리 기법의 히스토그램 분석을 이용하여 콘크리트 구조물 표면의 최대 균열 폭을 평가하는 것이다. 이를 위하여 콘크리트 표면 균열에 대한 영상을 촬영하고, 촬영된 영상을 회색 영상 및 이진화 영상으로 변환하였다. 이진화된 영상은 팽창과 침식이 적용된 후 레이블링을 통하여 분리된 객체로 인식된다. 콘크리트 표면은 시간이 경과함에 따라 먼지와 얼룩 등이 발생될 수 있으며, 촬영 조건에 따라 그림자 및 조명 반사가 포함될 수 있다. 또한, 콘크리트 균열은 연속적인 형상으로 발생되는 반면에 잡음은 점의 형태로 나타난다. 이러한 영향을 제거하기 위하여 이진화 과정은 양방향 블러와 적응적 경계를 적용하였으며, 레이블링된 영역에 대하여 면적비를 통한 잡음 제거를 수행하였다. 잡음이 제거된 각각의 균열 객체는 히스토그램 분석을 통하여 x축과 y축에 대한 최대값 및 그 위치가 연산되고, 분리된 객체에 대한 각각의 최대값 위치에서 삼각비를 통하여 균열 폭을 평가하게 된다. 제안된 방법에 의해 평가된 최대 균열 폭은 균열 게이지에 의해 계측된 값과 비교 분석되었다. 본 연구에 의해서 제안된 방법은 콘크리트 표면 영상에 대한 균열 폭 평가에 신뢰성을 향상 시킬 수 있을 것이다.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.311-321
• /
• 2011

RC 슬래브에 배근되는 철근비와 충격체의 충돌속도가 국부손상에 미치는 영향을 평가하기 위하여 일련의 충돌해석을 수행하였다. 해석결과, 철근비는 관입깊이 및 관통두께에 별 다른 영향을 미치지 않았으며, 후면 콘크리트의 탈락면적에는 큰 영향을 미치는 것으로 나타났다. 충격체의 충돌속도가 증가할수록 철근콘크리트 슬래브의 국부손상 정도는 증가하는 경향을 보였다. 이상의 해석결과는 격납건물 및 구조물의 내충격설계시 유용한 자료로 활용될 수 있을 것으로 기대된다.

• Computers and Concrete
• /
• 제13권4호
• /
• pp.547-567
• /
• 2014

Precast Seismic Structural Systems (PRESSS) provided an iterative procedure for obtaining optimum design of unbonded post-tensioned coupled precast concrete wall systems. Although PRESSS procedure is effective, however, it is lengthy and laborious. The purpose of this research is to employ Artificial Neural Network (ANN) to predict the optimum design parameters for such wall systems while avoiding the demanding iterative process. The developed ANN model is very accurate in predicting the nondimensional optimum design parameters related to post-tensioning reinforcement area, yield force of shear connectors and ratio of moment resisted by shear connectors to the design moment. The Mean Absolute Percent Error (MAPE) for the test data for these design parameters is around %1 and the correlation coefficient is almost equal to 1.0. The developed ANN model is then used to study the effect of different design parameters on wall behavior. It is observed that the design moment and the concrete strength have the most influence on the wall behavior as compared to other parameters. Several design examples were presented to demonstrate the accuracy and effectiveness of the ANN model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.47-48
• /
• 2023

Reinforced concrete structures are an integrated structure in which reinforcing bars are placed on the tensile side of the beam to compensate for concrete that is strong in compression but weak in tension, so that the concrete receives compressive force and the reinforcing bars receive tensile force. It is durable, fire-resistant, economical, and adapts to the shape and dimensions of the structure. It has been widely used for a long time because it can be made freely without restrictions. However, reinforced concrete structures have the disadvantage that cracks occur easily, so they are repaired using a cross-sectional construction method. During this process, problems such as the repair part falling off occurred, so in order to solve the problem, stress changes due to changes in the size of the repair part were examined. As a result, based on the elastic modulus ratio of 1.0, the stress tended to increase as the size of the repair part decreased when it was less than 1.0, and the opposite tendency was seen when it was more than 1.0. This is believed to be due to an increase in the area of the part with a large elastic modulus.