• 한국국방경영분석학회지
• /
• 제27권2호
• /
• pp.1-24
• /
• 2001

As the weapon systems of the 21st century are becoming more and more performance /technoloriven, it is only becoming more expensive to obtain the weapon systems. Therefore, it is absolutely vital for every nation to find a way to reduce cost objectives. As CAIV is a strategy that entails setting aggressive, yet realistic cost objectives when defining operational requirements and acquiring defense systems and managing achievement of these objectives, we believe that it is essential for us to find out what it is and how we can adopt it so that we can provide ourselves with highly capable systems that are affordable. Therefore, In this paper we will give a brief overview of CAIV that is one of the main acquisition strategies adopted by DoD of U.S. including some case studies of CAIV. Furthermore, the paper will analyze stated cost objectives in our country and suggest realistic opportunities for cost reduction.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권3호
• /
• pp.175-190
• /
• 2013

This study considers reliability growth management as the excellent method for construction equipment development with the effect on decreasing COPQ(Cost of Poor Quality Cost) of new products. MIL-HDBK-189A(1981) and RADC-TR-84-20(1984) standards provide a general concept of reliability growth management including to reliability growth test, models and FRACAS(Failure Reporting and Corrective Action System). There is no study how to apply reliability growth management to construction equipment(or machine) development. This paper propose the method to apply it to construction equipment development process from the reliability target setting for developing products to launching them at market. It is expecially showing how to set target reliability for new developing equipment and the development risk to reach the reliability target in detail.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.789-795
• /
• 2008

Slope stability is affected by various factors. For safety management of slopes, monitoring systems have been widely constructed along railway lines. The representative data from the systems are variations of ground profile such like ground water level and pore water pressure etc. and direct displacement measured by ground clinometer and tension wire sensor. Slopes are mainly effected by rainfall and rainfall causes the decrease of factor of safety(FOS). Because FOS varies linearly by the variation of ground water level and pore pressure, it has a weak point that could not define the time and proper warning sign to secure the safety of the train. In this study, alternative of FOS such as reliability index and probability of failure is applied to slope stability analysis introducing the reliability concept. FOS, reliability index, probability of failure and velocity of probability of failure of the slopes by variation of ground water level are investigated for setting up the specification of safety management of slopes. By executing case study of a slope(ILLO-IMSUNGLI), it is showed to be applied to specification of safety management.

• 호남수학학술지
• /
• 제43권3호
• /
• pp.547-559
• /
• 2021

We first define the notions of filter continuous, filter sequentially continuous and filter strongly continuous in the framework of fuzzy normed space (FNS), and then we introduce the notion of filter slowly oscillating sequences in the setting of FNS and shows that this notion is stronger than slowly oscillating sequences. Further, we define the concept of filter slowly oscillating continuous functions, filter Cesàro slowly oscillating sequences as well as some other related notions in the aforementioned space and investigate several related results.

• Nonlinear Functional Analysis and Applications
• /
• 제26권1호
• /
• pp.117-135
• /
• 2021

Our purpose in this paper is to introduce the concept of complex valued convex metric spaces and introduce an analogue of the Picard-Ishikawa hybrid iterative scheme, recently proposed by Okeke [24] in this new setting. We approximate (common) fixed points of certain contractive conditions through these two new concepts and obtain several corollaries. We prove that the Picard-Ishikawa hybrid iterative scheme [24] converges faster than all of Mann, Ishikawa and Noor [23] iterative schemes in complex valued convex metric spaces. Also, we give some numerical examples to validate our results.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.1192-1201
• /
• 2021

This study focused on how to analyze the ICT policy formation process using social big data. Specifically, in this study, a method for quantifying variables that influenced policy formation using the concept of a policy triggering mechanism and elements necessary to present the analysis results were proposed. For the analysis of the ICT policy triggering mechanism, variables such as 'Scope', 'Duration', 'Interactivity', 'Diversity', 'Attention', 'Preference', 'Transmutability' were proposed. In addition, 'interpretation of results according to data level', 'presentation of differences between collection and analysis time points', and 'setting of garbage level' were suggested as elements necessary to present the analysis results.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.115-123
• /
• 2019

White-box cryptography is an implementation technique in order to protect secret keys of cryptographic algorithms in the white-box attack model, which is the setting that an adversary has full access to the implementation of the cryptographic algorithm and full control over their execution. This concept was introduced in 2002 by Chow et al., and since then, there have been many proposals for secure implementations. While there have been many approaches to construct a secure white-box implementation for the ciphers with SPN structures, there was no notable result about the white-box implementation for the block ciphers with Feistel structure after white-box DES implementation was broken. In this paper, we propose a secure white-box implementation for a block cipher SEED with Feistel structure, which can prevent the previous known attacks for white-box implementations. Our proposal is simple and practical: it is performed by only 3,376 table lookups during each execution and the total size of tables is 762.5 KB.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.21-22
• /
• 2015

Productivity has been a wide-ranging challenge for the construction industry, both in Australia and globally. Particularly in Western Australia's construction and resources sectors, continuously low productivity will potentially discourage future investments. The emergence of the global marketplace necessitates that the supply chain needs to focus on the concept of the holistic efficiency. The isolated geographical position of Australia only exacerbates this phenomenon. In recent years, Building Information Modelling (BIM) has been suggested as an efficient way to help productivity improve and information management throughout supply chains. This keynote talk will focus on discussing ways of implementing BIM to enhance site productivity focusing on Western Australia's construction projects. It will show new trends of its applications to accomplish an innovative way in construction project management. The talk will also give an insightful summary of integrated methods with state-of-the-art technologies backboned by the BIM cases from construction and oil and gas industry projects.

• Architectural research
• /
• 제9권1호
• /
• pp.9-18
• /
• 2007

The objective of this research study was twofold; 1) to explore and identify health supportive design factors in Swedish elderly care homes and 2) to understand their usefulness and suggest implication in Korean elderly care settings. A descriptive and explorative method was applied using a combination of field studies and semi-structured interviews. Three study trips were carried out during Sept. $14^{th}$ and Oct. $12^{th}$ 2005; two facilities situated in Stockholm suburbs and one in the south of Sweden. According to this research, the valuable factors to support health and well-being for the elderly are as follows; 1) Community integration: These elderly care homes are generally places close to a residential area center or a city center. Services are often shared between residents and community members at large, consequently there is a flow of "visitors" of all ages connecting with the facility on a daily basis. 2) Homelike environment: A noteworthy aspect of Swedish elderly care homes is keeping the facility appearance as homelike as possible. The associations with home may be explored through the appearance and configuration of both the exterior and interior of the building. These homes seemed to be designed with a conscious aim to create a homelike setting. 3) Small scale approach: Clustering of resident rooms is one method through which the small scale approach can be achieved in larger facilities. With unit clusters, the facility can foster opportunities for social interactions among resident. 4) Accessibility to garden and nature: The courtyard is a well developed concept in planning elderly care homes in Sweden. They are generally safe and easily accessible to the residents. Studying Swedish models may provide practical knowledge of how the physical setting may improve resident's health in Korean elderly care homes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1066-1069
• /
• 2004

Recently the monitoring system of tool setup in high speed precision machining tool is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining center and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3∼20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50％ and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setting easy, quick and precise in high speed machining center. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setting monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000 ∼ 60,000 rpm. The dynamic phenomena of tool-setup is analyzed by implementing the monitoring system of rotating tool system and the noncontact measuring system of micro displacement in high speed.