• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.214-221
• /
• 1995

When the broad pressure region (0.5-3.5 atm) of laser media is pumped by 70 ns [FWHM] electronbeam accelerator (800 kV, 21 kA), the correlation between free-runnuing XeF$(C\rightarrowA$ excimer laser output and Xe concentration are studied. The resonator consisted of dichroic output coupler, and the laser output is optimized with laser media $(Xe/F_2/Ar)$ as functions of total pressure and gas mixing ratio. Under the condition of F2 0.46% fixed, the laser intrinsic efficiencies of 0.38%, 1.03%, and 0.29% are obtained at 1. 2, and 3 atm, respectively. So then the peaks of laser intrinsic efficiency occured to the higher Xe concentration with decreasing total gas pressure. By analyzing the kinetics for the $XeF^*(C)$ formation efficiency and XeF$(C\rightarrowA$ laser extraction efficiency the dependence of Xe concentration on their correlation is explained. As the results we propose efficient operation of an atmosphericpressure XeF$(C\rightarrowA$ laser. laser.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.470-479
• /
• 2004

The experimental conditions and relationships between parameters such as organic matter, aeration volume, aeration time, and precipitation time for the effective treatment of domestic wastewater were investigated. With the batch systems, the adsorption amount of unit microbe was measured with the change of MLSS concentration, precipitation time, and aeration amount. Theoretical adsorption amount of microbes was then numerically formulated by use of a SPSS multiple analysis as follows: $$Y=-0.0106(X_1)+0.07310(X_2)+42.705(X_3)+62.700$$ In this study, the amount of organisms to be removed in the range of MLSS concentration 2,000~4,500 mg/l were examined. In order to investigate the optimal condition of nitrification, the upper water in the biosorption stage was used as the initial experiment water. The results showed that the C/N ratio was 1.5 and the reaction time for the optimal nitrification was 1.5 hr. When the adsorption efficiency for microbe biosorption was 66%, the optimum denitrification efficiency was 83.3%. When the optimum parameters obtained from the batch experiment were applied to the lab-scale operation, the total retention time from the flow-in to flow-out was 10 hours and the removal efficiency was 93.8% for $COD_{cr}$ and 80.9% for TN. For the full-scale operation, the total retention time was 9.0 hours and the removal efficiency was 94.4% for BOD, 89.6% for $COD_{cr}$, 88.0% for TN, and 86.2% for TP.

• Korean Journal of Materials Research
• /
• v.20 no.6
• /
• pp.294-300
• /
• 2010

In this study, we fabricated a polymer light emitting diode (PLED) and investigated its electrical and optical characteristics in order to examine the effects of the PFO [poly(9,9-dioctylfluorene-2-7-diyl) end capped with N,N-bis(4-methylphenyl)-4-aniline] concentrations in the emission layer (EML). The PFO polymer was dissolved in toluene ranging from 0.2 to 1.2 wt%, and then spin-coated. To verify the influence of the TPBI [2,2',2"-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole)]electron transport layer, TPBI small molecules were deposited by thermal evaporation. The current density, luminance, wavelength and current efficiency characteristics of the prepared PLED devices with and without TPBI layer at various PFO concentrations were measured and compared. The luminance and current efficiency of the PLED devices without TPBI layer were increased, from 117 to $553\;cd/m^2$ and from 0.015 to 0.110 cd/A, as the PFO concentration increased from 0.2 to 1.0 wt%. For the PLED devices with TPBI layer, the luminance and current efficiency were $1724\;cd/m^2$ and 0.501 cd/A at 1.0 wt% PFO concentration. The CIE color coordinators of the PLED device with TPBI layer at 1.0 wt% PFO concentration showed a more pure blue color compared with the one without TPBI, and the CIE values varied from (x, y) = (0.21, 0.23) to (x, y) = (0.16, 0.11).

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.265-271
• /
• 2015

In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water ($170^{\circ}C$, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of $\leq$ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.117-123
• /
• 2006

The pulping process in a papermaking process for a reconstituted tobacco sheet (RECON) was evaluated. For the practical information, the experiments were conducted in a real mill. Two pulping conditions were chosen and changed depending on the feasibility, such as the pulping temperature and the properties of pulping water. The higher pulping temperature resulted in the easier dissolution of solubles from the raw materials. However, the efficiency of screw press process was decreased by the higher pulping temperature, which resulted in the reduction of the HWS and the concentration in the #1 screw press filtrate. The addition of SEL(Strong extracted liquor) to pulper affected the efficiency of dissolution and the final concentration of #1 screw press filtrate. Although the higher SEL resulted in the less dissolution of the solubles from the raw materials, the concentration of the #1 screw press filtrate was greatly increased by the higher addition of SEL, which could provide much better efficiency to the following evaporation process of the filtrate and could increase the whole productivity.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.4
• /
• pp.223-233
• /
• 2018

Topical anesthetics are commonly used in oral & maxillofacial surgery to control pain in the oral cavity mucosa before local anesthetic injection. These anesthetic agents come in many forms, developed for different usages, to minimize adverse reactions, and for optimal anesthetic efficiency. Earlier studies have revealed that these agents may also limit the growth of microorganisms in the area of anesthetic application. Many topical anesthetic agents show different levels of antimicrobial activity against various bacterial strains and Candida. The dosage of local anesthetic agent used in some clinical preparations is too low to show a significant effect on microbial activity. Efficiency of antimicrobial activity depends on the local anesthetic agent's properties of diffusion within the bloodstream and binding efficiency with cytoplasmic membrane, which is followed by disruption of the bacterial cell membrane. The antimicrobial properties of these agents may extend their usage in patients to both control pain and infection. To develop the topical local anesthetic optimal usage and antimicrobial effect, a collaborating antiseptic agent may be used to benefit the local anesthetic. However, more research is required regarding minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of topical local anesthetic agents with drug interaction between anesthetics and antiseptic agents.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.718-724
• /
• 1998

Twelve gilts were used to investigate the effect of lysine to protein ratio (5.2 g lysine/100 g CP vs. 6.7 g lysine/100 g CP) in practical diets on nitrogen retention and the efficiency of utilization in growing pigs. Treatments involved 2 levels of dietary lysine (5.2 or 6.7 g/100 g CP) and 3 levels of dietary crude protein (11, 14 and 17% in diet). Nitrogen retention was greatest when pigs were fed the control diet containing 17% protein. Nitrogen retention progressively increased as dietary protein increased (p < 0.01), but it was not affected by lysine concentration (g/100 g CP). Apparent biological value (ABV, nitrogen retained/apparently digestible nitrogen) was estimated to be ~50% at the maximum nitrogen retention. ABV was not affected by lysine concentration, but declined (p < 0.05) as the dietary protein level increased. The efficiency of intake N used for maximum nitrogen retention was approximately 44%. One gram of lysine supported approximately 9 to 10 g apparent protein accretion (nitrogen retention ${\times}$ 6.25/lysine intake) in pigs fed control diets. The efficiency of lysine utilization for protein accretion was lower in pigs fed high-lysine diets (6.7 g lysine/l00 g CP) so that 1 g of lysine accounted for 7 to 8 g of protein accretion in these pigs (p < 0.01). The lysine required to support maximum nitrogen retention in pigs fed high-lysine diets was higher than that in pigs fed control diets, which suggests that lysine was over-fortified relative to crude protein, since practical diets can not be formulated without excess of some amino acids. In summary the concentration of 5.2 g total lysine/100 g CP in diet is more appropriate for corn-soybean diets than the commonly suggested the content of 6.7 g total lysine/100 g CP.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.29-38
• /
• 1999

Three kinds of soil surface applied herbicides and three kinds of foliage applied herbicides were used to study weed control effect, appropriate concentration, phyto-toxicity against trees and economical efficiency of weed control on trees, Pinus thunbergii, Picea abies, Chamaecyparis obtusa, Quercus accutissima, and Fraxinus rhynchopylla in a nursery. The results were obtained as follows; 1.The control effect of the soil surface applied herbicides showed that the three herbicides; Alachlor, Pendimenthalin and Simazine were alike in their holding effect of weed development, and the sensibility of weed spp. on the herbicides was different. The mean control effect was 58~89%. 2. The weed control effect of the foliage applied herbicides demonstrated that Paraquat dichloride was the best of 84~95% and followed by Glufosnate ammonium and Glyphosate. Especially when the half of its standard amount was treated, the effect of Paraquat dichloride was higher than the other herbicides. 3. Generally, the weed control effect became better as the concentration of the herbcide getting higher. As the concentration of the herbicide got higher, the restraining effect of weed development was continued for a long time in the soil surface applied herbicides, while the weed control effect appeared earlier in the foliage applied herbicides. 4. As the result of the soil surface treatments, 20% of short seedings of Fraxinus rhychopylla treated with twice amount of standard Alachlor died and the rest seeding showed low growth. In the other treatments, there was neither harmful effect of herbicides on the seedings nor growth decrease of them compared to those weeded by men. 5. When treated with foliage applied herbcides, leaves were partially of and discolorated in most treatments. About 0.4~6.2% of Fraxinus thynchopylla, which had short seedings died, and there was no difference in growth with the other treatments. 6. The herbicides showed better economical efficiency over 68% than weed control by men. Especially, Alachlaor of the soil surface applied herbicides showed the highest efficiency(77.6%), while Paraquat dichloride of the foliage applied herbicides was the best(70.3%)..

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.292-299
• /
• 2014

Iopromide is an X-ray contrast agent that has been detected frequently with high concentration level in surface waters. Structural characterization of degradation products and measurement of degradation efficiency of iopromide by an electron beam irradiation were performed. For the fortified sample with iopromide, electron beam irradiation (UELV-10-10S, klysotrn, 10 MeV, 1 mA and 10 kW) was performed. The chemical structures of I_D_665 and I_D_663, which are degradation products of iopromide, were proposed by interpretation of mass spectra and chromatograms by LC/ESI-MS/MS. The mass fragmentation pathways of mass spectra in tandem mass spectrometry were also proposed. Iopromide was degraded 30.5~98.4% at dose of 0.3~5 kGy, and 97.8~30% in the concentration range $0.5{\sim}100{\mu}g/kg$ at electron beam dose of 0.3 kGy, respectively. Thus, increased degradation efficiency of iopromide by electron beam irradiation was observed with a higher dose of electron beam and lower concentration.

• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.38-46
• /
• 1983

This study was carried out to investigate the possibility of improving the performance of a kerosene engine with water addition. The engine used in this study was a single-cylinder, four-cycle kerosene engine with the compression ratio of 4.5. Water could be successfully added into the inlet manifold by an extra carburetor for the volumetric ratios of 5, 10, 20, and 30 percents. Variable speed tests at wide-open throttle were performed for five speed levels in the range of 1,000 to 2,200rpm for each fuel type. Volumetric efficiency and brake specific fuel consumption were determined, and brake thermal efficiency based on the lower heats of combustion of kerosene was calculated. To examine variation in fuel consumption, CO concentration, and cooling water temperature, part load tests were also performed. The results obtained are summarized as follow. (1) Brake torque increased almost in proportion to volumetric efficiency. But the ratio of increase in torque was greater than that of volumetric efficiency. Mean torque over the speed range of 1,000 to 2,200rpm increased 1, 3, 7, and 2 percents for 5, 10, 20, and 30 percents water addition, respectively. The increase in brake torque with water addition was greater at lower speeds. (2) Mean brake specific fuel consumption over the speed range of 1,000 to 2,200rpm decreased 1, 2, 3, and 3 percents for 5, 10, 20, and 30 percents water addition, respectively. (3) Mean temperature of cooling water over the speed range of 1,000 to 2,200rpm decreased 2, 4, 8, and 12 percents for 5, 10, 20, and 30 percents water addition, respectively. (4) The effects of decreasing CO concentration in the exhaust emissions with water addition were significant. At the speed range of 1,000 to 2,200rpm, CO concentration in the exhaust emissions decreased 2, 10, 23, percents for 5, 10, and 20 percents water addition, respectively. (5) Deposits were not discovered in the combustion chamber during the experiment. However, a little rust was formed in the water-supply carburetor.