• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.28-33
• /
• 2007

Often Regular Measurement Target 32 Spots which are distributed at Seo-gu in Incheon Metropolitan and Odour Emission Target 100 Factories based on the task instruction of Ministry of Environment in Korea were selected by considering to atmosphere phenomena and regional characteristics etc. This paper aims at building the Decreasing Prediction System of Odour which is capable of comparing and examining the concentration distribution by odour compounds, the distribution maps of odour diffusion and the contribution degree of sphere of influence, which is discharged from these above spots and factories.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1345-1348
• /
• 2010

Highly monodisperse polystyrene (PS) nanospheres were fabricated by surfactant-free emulsion polymerization in water using styrene, 2,2'-azobis(2-methyl propionamidine) dihydrochloride (AIBA), and poly(vinyl pyrrolidone) (PVP). The size and distribution of the PS nanospheres were systematically investigated in terms of initiator concentration, stabilizer concentration, reaction temperature, reaction time, and reactant concentration. With increasing AIBA initiator concentration, PS particle sizes are raised proportionally, and can be controlled from 120 to 380 nm. Particle sizes were reduced with increasing PVP concentration. This decrease occurs because a high PVP concentration leads to a large number of primary nuclei in the early stage of polymerization. When the reaction temperature increased, the sizes of the PS particles decrease slightly. The particles grew quickly during the initial reaction stage (1-3 h) and the growth rate became steady-state after 6 h. The PS sizes approximately doubled when the reactant (styrene, PVP, azo-initiator) concentrations were increased by a factor of eight.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.475-478
• /
• 2006

Total primary production resulting from the photosynthetic process can be defined as the amount of organic matter produced in a given period of time. It is proportional to the chlorophyll-a (chl-a) values in the surface layer of the ocean. The MODIS board on Aqua satellite measures visible and infrared radiation in 36 wavebands, providing simultaneous images of chl-a concentration and sea surface temperature (SST) in the upper layer of the sea. The seasonal distribution of chl-a concentration during one year from April 2005 to March 2006 was examined. Light has a role of starting the seasonal cycle. The Kuroshio Current in this area induces many oceanographical features affecting to the change of seasonal control. The chl-a concentration is also seasonal, which is low in summer and high in winter. In summer, the meandering of Kuroshio Current induces strong eddies and increases the chl-a concentration. In autumn, the delayed small autumn bloom occurred until last December due to the Kuroshio Current. When the Kuroshio axis moves far from the coast, the coastal water dominates and increases the concentration even in the winter. The spring bloom starts early at the beginning of March and decreases during the spring.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.131-136
• /
• 2008

The variation of the particle size distribution and density as well as the chemical composition of aerosols is important to evaluate the particles. This study measured and analyzed airborne particles using a scanning mobility particle sizer (SMPS) system and an aerodynamic particle sizer (APS) at the University of Seoul during every season. The highest particle number concentration of airborne particles less than $0.9\;{\mu}m$, occurred in winter, while the highest particle number concentration of airborne particles more than $0.9\;{\mu}m$, occurred in spring. Mass concentration appeared highest at spring. Also, when we compared $\beta$-ray's mass concentration with calculated mass concentration by using the SMPS-APS system during each season, density of the winter is $1.92\;g/cm^3$, spring density is $1.64\;g/cm^3$, fall density is $1.57\;g/cm^3$. We found out that PM10 density was differ every season. However, while the calculated density is whole density for PM10 the density of each diameter was different. In this study the density estimation equation of the QCM cascade impactor measured mass concentration of each diameter.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.857-862
• /
• 2014

Mechanical alloying under various gas atmospheres such as Ar, an Ar-$H_2$ mixture, and He gases were carried out, and its effects on the powder properties, microstructure and mechanical properties of ODS ferritic steels were investigated. Hot isostatic pressing and hot rolling processes were employed to consolidate the ODS steel plates. While the mechanical alloyed powder in He had a high oxygen concentration, a milling in Ar showed fine particle diameters with comparably low oxygen concentration. The microstructural observation revealed that low oxygen concentration contributed to the formation of fine grains and homogeneous oxide particle distribution by the Y-Ti-O complex oxides. A milling in Ar was sufficient to lower the oxygen concentration, and this led a high tensile strength and fracture elongation at a high temperature. It is concluded that the mechanical alloying atmosphere affects oxygen concentration as well as powder particle properties. This leads to a homogeneous grain and oxide particle distribution with excellent creep strength at high temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.323-329
• /
• 2004

In situ particle size and volume concentration of suspended sediment was measured at the mouth of Seomjin River Estuary In February 2001, using an optical instrument, 'LISST-100'. Time variation of in situ particle size and concentration shows: (1) during ebb tide, Seomjin River supplies relatively fine-grained particles with less-fluctuated, compared to during flood tide, and well-behaved concentrations following the tidal cycle; and (2) during flood tide, relatively coarse-grained particles with highly variable in size distribution and concentration flow upstream from Kwangyang Bay. This explains a poor correlation $(r^{2}=0.10)$ between sediment concentration and beam attenuation coefficient during flood and a high degree of correlation $(r^{2}=0.80)$ during ebb tide. Relatively fine grained and well defined, monotonous size distribution may promote the correlation between concentration and beam attenuation coefficient due to optical homogeneity of particles during ebb tide. Abundance of large aggregates with time-varying size and shape distributions may be mainly responsible for variations in optical properties of the sediment during flood tide, and thus may confound the relationship between the two variables. The difference in particle sizes and shapes between flood and ebb tides can also be observed on SEM images.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.2
• /
• pp.57-64
• /
• 2010

This study aims to understand the degree of inequality of surveyed amenity resources and identify which resource and region have the highest concentration by estimating Lorenz Curve and the Gini's Coefficient. The Lorenz Curve and Gini's Coefficient derived from economics are introduced as tools for investigating and quantifying regional variability of amenity resources concentration. This study describes the concepts underlying the application of the Gini's coefficient to measure the concentration of amenity resources in 11 regions, Chungbuk Province, Korea. The Lorenz Curve presents a graphical view of the cumulative distribution of amenity resources and the Gini's Coefficient provides a single-parameter measure of the distributional concentration of amenity resources. Also the Gini's Coefficient is compared to the number of amenity resource for understanding distributional difference between concentration and quantitative distribution of amenity resources. The results demonstrate significantly different regional variation according to the amenity variables: almost intact nature, interaction between nature and man, man-made.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.677-688
• /
• 2003

The purpose of this study was to predict occurrence of earthquakes in Korea by measuring the concentration of radon radioactivity in the air and in the underground water. Two monitoring systems of radon concentration detection in the air were installed in Seoul, East Coast area, whereas of radon concentration in the underground water in Kyungju area during December, 1999 to June, 2001. The distribution of radon concentration in the air in Seoul is as follows Winter(10.10 $\pm$ 2.81 Bq/㎥), autumn(8.41 $\pm$ 1.35 Bq/㎥), summer(5.83 $\pm$ 0.05 Bq/㎥) and spring (5.34 $\pm$ 0.44 Bq/㎥), whereas the distribution of radon in the air in the East Coast area showed some difference as follows : autumn (14.08 $\pm$ 5.75 Bq/㎥), Summer (12.04 $\pm$ 0.53 Bq/㎥), Winter (12.02 $\pm$ 1.40 Bq/㎥) and spring (8.93 $\pm$ 0.91 Bq/㎥). In the meanwhile, the distribution of radon in the water is as follows : spring (123.59 $\pm$ 16.36count/10min), Winter (93.95 $\pm$ 79.69counter/10min), autumn (68.96 $\pm$ 37.53counter/10min) and spring (34.45 $\pm$ 9.69counter/10min). The daily range of the density of radon concentration in Seoul and East Coast area was between 5.51 Bq/㎥ - 9.44 Bq/㎥, 7.15 Bq/㎥ - 15.27 Bq/㎥, respectively. Correlation of the distributions of radon concentrations in the air and in underground water with earthquake showed considerable variations of radon concentration before the occurrence of the earthquake. The results suggested that radon radioactivity seemed to be helpful for the prediction of the occurrence of earthquake.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.25-34
• /
• 2001

Heavy metal level and distribution in sediment and bivalves from the tidal flats along the mid-western coast, Korea. were investigated in this study. The averages of heavy metal concentrations in sediments from 5 sampling sites ranged from 86.35-187.77mg/kg for Mn. 13.25-17.73mg/kg for Zn.6.80-11.85mg/kg for Cr,4.28-6.25mg/kg for Ni, 1.85-3.09mg/kg for Cu, 0.004-0.02()mg/kg for Cd and 5.70-10.41 mg/kg for Pb, respectively. From the results of heavy metal concentrations in mussels, the levels of Mn and Fe concentrations in S. strictus collected from S1 antral S2 sites were particularly high. Deviations of heavy metal concentrations am(Ing the individual mussels from the same site could be largely minimized by selecting mussel samples of the limited range in body size(8.5-11cm). Among the mussels of the limited body size, heavy metal concentrations both in the flesh and in the whole soft part were not strongly related to the body size. It was shown that ,in S. strictus, Cu moves fast into the flesh parts after absorption, while Pb and Fe move fast into the non-flesh parts. Overally. the heavy metal concentration in the tends to increase with that in the whole soft parts. The concentration factors(heavy metal concentration in 5. strictus/heavy metal concentration in sediment) showed that, of the examined meta1s. Cd is the most cumulative in the body of S. strictus followed by Zn and Cu, while Mn, Cr. Ni and Pb are not cumulative.