• 한국해양공학회지
• /
• 제18권1호
• /
• pp.75-79
• /
• 2004

Organic coatings are widely used to control of the corrosion of a steel structure. The water in coatings may cause the coatings to swell, leading to the degradation of the coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently, the presence of such substances at coating-metal interface promotes corrosion of the metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were conducted under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl(a$H_2O$≒1) and concentrated 10M-LiCl(a$H_2O$≒0.15). The anticorrosive performance of coatings was found to decrease in the order of urethane-urethane > urethane-epoxy > epoxy-epoxy coating.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.806-808
• /
• 2004

A gas chromatography/mass spectrometric assay method has been developed for the simultaneous determination of icing inhibitors, ethylene glycol monomethyl ether and diethylene glycol monomethyl ether in ground water contaminated with JP-8. Ethylene glycol monobutyl ether and ethylene glycol monoethyl ether were used as the internal standard and surrogate, respectively. 100 mL of ground water was extracted twice with 20 mL of methylene chloride. The extract was concentrated to dryness, dissolved with 100 ${\mu}$L of methanol and analyzed by GC-MS (SIM). The use of an Innowax column gave the peaks good chromatographic properties, and the extraction of these compounds from samples gave recoveries of about 50% with small variations. The method detection limits of the target compounds were in a range of 0.5-0.8 ng/mL in ground water.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.262-268
• /
• 2003

Organic coatings are widely used to control the corrosion of steel structure. The water in coatings may cause swelling or solvation of coatings, leading to the degradation of coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently the presence of such substances at coating-metal interface promotes corrosion of metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were carried out under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl($a_{1120}{\fallingdotseq}1$) and concentrated l0M-LiCl($a_{1120}{\fallingdotseq}0.05$). The anticorrosive performances of coatings were found to decrease in the order of urethane-urethane> urethane-epoxy> epoxy-epoxy coating.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.15-21
• /
• 2019

In the mine exploration sites, sustainable treatment system of mine water with energy saving and minimized chemical additives is required. Since most of the mine water contains highly-concentrated ferrous ion, it is necessary to study on the removal method of iron ions. We propose the system consisting of two processes; precipitation process by air oxidation using solid catalyst-modified magnetite and separation process combining gravitational sedimentation and magnetic separation using a permanent magnet. Firstly, in the precipitation process (a former process of the system), we succeeded to prepare solid catalyst-modified magnetite. Air oxidation using solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material showed high iron removal capability. Secondly, in the separation process (latter process of the system), solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material can be separated by a superconducting bulk magnet and a permanent magnet.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.572-581
• /
• 2005

This research is conducted to develop predictable method of real scale nanofiltration treatability with small scale nanofiltration experiments. As a result of comparing calculated values with measured values, they are in a good agreement for the concentrations in filtered water and concentrated water. The results of that are not affected by change of system recovery from 20% to 95%. The proposed method is produced using constant recovery of elements, that is, no considering the pressure change. we can predict filtrated flux and contaminant concentrations with the method. The method has the following steps. (1) Calculate recovery of each element with water quality level after fixing recovery elements, (2) Predict system recovery with recovery of elements in 1, 2, 3, and 4 banks, (3) Run small scale nanofiltration experiments in predicted water quality and (4) Simulate large scale nanofiltration system for forecasting actual water quality. As the cost for nanofiltration pretest will reduced if we use the proposed method, it will be a promising method for introducing nanofiltration to supply safe drinking water.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.437-444
• /
• 2008

Many other countries have investigated the new backwash water treatment process to save the existing water resource. There are various methods for reusing backwash water, but the membrane system has received the most interest for its efficiency. The objective of this study was to certify the application of membrane filtration system for the backwash water treatment. The experiment equipment was composed of Lab scale tubular membrane filtration system. Generally, cross-flow operation mode is used in the tubular membrane system but cross-flow operation mode demands high electric cost mainly for the pump energy. So to cut off electric cost, dead-end operation mode was used in this experiment. Filtration and bleed operation cycle was used in this membrane system. Backwash water was concentrated during the filtration process and when backwash water reached our target suspended solid concentration, it was discharged from this system. For efficient operation of filtration and bleed, mathematical matrix was drawn up and with this matrix we could simulate various sets of filtration and bleed time.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.426-433
• /
• 2020

본 연구는 선박평형수처리시스템(BWMS) 형식승인을 위한 국제해사기구(IMO)와 미국해양경찰(USCG)의 시험방법 중 차이가 큰 식물플랑크톤의 전처리 방법을 비교하기 위해 배양종, 자연종, 그리고 BWMS의 육상시험에서 채취한 식물플랑크톤 샘플을 이용해 농축과 비농축에 대한 비교시험을 수행했다. 배양종과 자연종의 비교 시험은 농축하는 과정에서 네트 손실 및 손상이 있는 것으로 확인되었으며, 이는 대상종의 생리·형태적 특성에 따라 차이가 있음을 확인했다. BWMS 육상시험에서 생물 농도가 높은 대조수의 경우 비농축한 시료 개체수가 농축한 시료보다 2배 정도 높은 값을 보였고, 생물 개체수가 낮은 처리수는 두 방법 간의 뚜렷한 차이가 없었다. 이러한 결과는 미국형식승인 방법으로 육상시험을 수행하면 시험수 조건이 더 가혹하다는 것을 의미한다. 결과적으로 식물플랑크톤 샘플링 과정에서 농축과 비농축의 차이가 있음에도 불구하고, 농축 방법이 BWMS 성능을 평가하는 방법으로 적용할 수 있을 것으로 판단된다. 하지만 처리수 내에서 살아있는 종이 샘플링의 농축 과정에서 네트 손실 및 손상이 있을 수 있기 때문에 대상종에 대한 평가방법을 개발할 필요성이 있다.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.683-690
• /
• 2009

The water quality of reservoir can be controled by water quality prediction model because it can not only grasping the present water state but also predicting the water quality in future. In this study, WASP model is used to predict the water quality of Chungju reguration reservoir. This model has some special option which predicts the pollutant outflow phenomenon caused by the contamination sources. So this model is widely used because that can present the scientific basis in this field. This model can help the managers make the right choice of water quality policy. Environmental grade of Chungju reguration reservoir is in III,IV grade which is in bad condition comparatively. The water contamination will be in poor as the year passes. When considering T-N, T-P which are the nutrient to control eutrophication, the concentrated administration about contamination sources is in urgent.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.238-246
• /
• 2012

Organic matters budget in Lake Hoengseong were monthly investigated from April 2009 to November 2009. The intense rainfall occurred at between July and August and the hydrological factors were highly varied during the rainfall season. By the concentrated rainfall, the elevation, influx and efflux were sharply increased and the turbid water was also flowed into the middle water column in Lake. The inflow of turbid water increased the nutrient concentrations in water body and this appears to stimulate of phytoplankton regard as the primary productivity of influx of organic matter. Monthly average concentration of dissolved organic carbon (DOC) was generally higher than the particulate organic carbon (POC) concentration in Lake, but Temporal and spatial variation of POC concentration was higher than DOC and the maximum POC concentration was recorded in surface water in August, had the highest phytoplankton biomass. Organic carbon concentration in inflow site was rarely changed during the dry season, but the concentration was rapidly increased by the initial intense rainfall. In organic matters budget, the most of the organic matters was inflowed from the inflow site at rainfall season. Especially, the influx of allochthonous organic matters during the intense rainfall was 72.4% in the total influx organic matters.

• Corrosion Science and Technology
• /
• 제9권5호
• /
• pp.216-222
• /
• 2010

Most of the thirteen substations in operation in the metropolitan area were installed around the year 2000, and since water cooling methods are used to directly withdraw heat from transformer oils, a stable supply of electric power is required through optimal maintenance of facilities. The water cooling tower installed outdoors, which uses the water supply as sprinkler water, experiences the most problems. Since more than 90% of the cooling water is reused, the dissolved composition in the water becomes concentrated due to long operating hours, and impurities dissolve in the water due to air flowing in from the outside, forming hard scales on the outer surface of the cooling tube, and in extreme cases, reacting with the tube material composition, leading to corrosion. As a result, not only is cooling efficiency lowered, but in extreme cases the cooling tube must be replaced. In this study, the characteristics and composition of the scales formed on the cooling tube were analyzed and corrosion characteristics of material types were identified in order to find an efficient maintenance method for cooling tubes. In addition, the degree of dissolution of various chemicals were investigated during the removal of scales that have been formed.