• Journal of Technologic Dentistry
• /
• v.45 no.4
• /
• pp.118-123
• /
• 2023

Purpose: This study proposes measures needed to implement a job-based national practical exam for dental technicians. Methods: For this study, a survey was conducted targeting 244 currently employed individuals. The current national practical test for dental technicians was divided into directions for the job-based practical test, subjects that need improvement among the current practical test subjects, items that need to be reflected in the practical test evaluation for each subject, and subjects that need to be added to the practical test. It comprised ten questions (Cronbach's α=0.801). Results: The following results were obtained. Satisfaction with the current practical test was lower than average. Future improvement should focus on job-based evaluation. The dental ceramic lab technology subject needs to be reorganized urgently, and the tasks that require evaluation for each subject are different. Moreover, if evaluation subjects are added in the future, the introduction of assessment for dental CAD/CAM (computer-aided design/computer-aided manufacturing) subjects was found to be the most urgent. Conclusion: In this study, the most necessary tasks of the current national practical examination for dental technicians were evaluated and the content needed for future reorganization was investigated. Future tests should be expanded to evaluate critical job areas. Furthermore, it is necessary to open new courses in fields such as CAD/CAM, as they are in high demand in the workplace.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.663-670
• /
• 2016

This paper introduces the concept of the computer-aided engineering(CAE) design method for a bypass valve in a system that is used for the safe lifting of mineral resources in deep-seabed mining. Although the bypass valve has a simple mechanism, its design is very difficult because of various influencing factors. This equipment, which has a complex design process, should be developed by CAE-based design method. The method can perform the design, design verification, and virtual experiment at the same time. In this study, the CAE-based method for the design of the bypass valve has been developed using fluid dynamics, multi-body dynamics, and optimization method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.423-439
• /
• 2012

This case report described a technique utilizing a computer-aided design (CAD)/computer-aided machining (CAM) - guided surgical implant placement and prefabricated temporary fixed prosthesis for an immediately loaded restoration. The advantages of CAD/CAM guided implant procedures are flapless, minimally invasive surgery and shorter surgery time. With this technique, less postoperative morbidity and delivery of prosthesis for immediate function would be possible. A patient with an edentulous maxilla received 8 implants in maxilla using CAD/CAM surgical templates. Prefabricated provisional maxillary implant supported fixed prosthesis were connected immediately after implant installation. Provisional prosthesis was evaluated for aesthetics, function during 6 months. Definitive implant supported fixed porcelain fused metal bridges were fabricated.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.29-35
• /
• 2005

This paper presents a novel prototype of an active auxiliary quasi-resonant snubber(Auxiliary Quasi-Resonant Commutation Block-Link; ARCB)-assisted three phase voltage source soft switching space voltage vector modulated PFC rectifier, which uses Zero Voltage Soft Switching (ZVS) commutation. The operating principles of this digitally-controlled three phase soft switching PWM-PFC rectifier system with an instantaneous power feedback scheme are illustrated and its steady-state performance is evaluated using computer-aided simulation analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.22-33
• /
• 1997

This paper describes a research work of developing a computer-aided design of blanking and piercing for stator and rotor parts. Based on knowledge-based rules, the die design system, STRTDES2, is designed by considering several factors, such as complexities of blank geometry and punch profile, and availability of press equipment and standard parts. Therefore this system can carry out a die design for each process which is obtained from the result of an automated process planning system, STRTDES1 and generate part drawing and the assembly drawing of die set in graphic forms. Knowledges for die layout are extracted from plasticity theories, relevant references and empirical know-hows of experts in blanking industries.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.30-36
• /
• 2003

Brittle materials such as glasses and ceramics, which are very weak under impact loading, show fragile failure mode due to their low fracture toughness and crack sensitivity. When brittle materials are subjected to impact by small spheres, high contact pressure occurs at the impacted surface causing local damage on the specimen. This damage is a dangerous factor in causing the final fracture of structures. In this research, the crack propagation process of soda-lime glass by the impact of small spheres is explained and the effects of several constraint conditions for impact damage were studied by using soda-lime glass; that is, the effects for the materials and sizes of impact ball, thickness of specimen and residual strength were evaluated. Especially, this research has focused on the damage behavior of ring cracks, cone cracks and several other kinds of cracks.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.523-528
• /
• 2005

The flow analysis is made to simulate the turbulent flow in the pipe with an obstacle. The models used are k-$\epsilon$, k-$\omega$, Spalart-Allmaras and Reynolds. The structured grid is used for the simulation The velocity vector, the pressure contour, the change of residual along the iteration number and the dynamic head are simulated for the comparison of four example cases. For the analysis, the commercial code is used.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.46-53
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing for stator and rotor parts and irregularly shaped sheet metal by press. An approach to the system is based on knowledge based rules. The process planning system by considering a blank layout for nesting of irregularly shaped sheet metal and an improved strip layout for stator and rotor parts and irregularly shaped sheet metal is implemented. Using this system, design parameters(utilization ratio, slitting width, pitch, working order, die blank shapes) are determined and output is generated in graphic forms. Knowledges for blank layout and strip layout are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blanking companies. The implemented system provides powerful capabilities for process planning of stator and rotor parts and irregularly shaped sheet metal.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.21-29
• /
• 2001

The general topology optimization can be considered as optimal material distribution. Such an approach can be unstable, unless composite materials are introduced. In this research, a nodal volume fraction method is used to obtain the optimum topology of continuum structures. This method is conducted from a composite material model composed of isotropic matter and spherical void. Because the appearance of the chessboard patterns makes the interpretation of the optimal material layout very difficult, this method contains a chessboard prevention strategy. In this research, several topology optimization problems are presented to demonstrate the validity of the present method and the recursive quadratic programming algorithm is used to solve the topology optimization problems.

• Journal of applied mathematics & informatics
• /
• v.14 no.1_2
• /
• pp.405-413
• /
• 2004

Rational parameterization of curves and surfaces is one of the main topics in computer-aided geometric design because of their computational advantages. Pythagorean hodograph (PH) curves and Minkowski Pythagorean hodograph (MPH) curves have attracted many researcher's interest because they provide for rational representation of their offset curves in Euclidean space and Minkowski space, respectively. In [10], Kim presented the characterization of the PH curves in the Euclidean space and analyzed the relation between the class of PH curves and the class of rational curves. In this paper, we extend the characterization of PH curves in [10] into that of MPH curves in the general Minkowski space and consider some generalized MPH curves satisfying this characterization.