• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.191-200
• /
• 2007

As the IEEE 802.11 WLAN has widely installed as a high-speed wireless network information infrastructure, there has been growing interest in both security and mobility of mobile terminals. However, for the case of mobile terminal employing IEEE 802.11i security standard, it is known that the user authentication procedure of IEEE 802.1x for stronger security enforcement may, due to its large delay, not be suitable for real-time multimedia communication. In this paper, we have proposed fast authentication method to resolve the above authentication delay problem, and verifies its performance via simulation analysis. Mobile terminals can get AP information reliably, and selectively execute authentication in advance during handover, which results in fast user authentication. In addition, by effectively managing the authentication information in mobile terminal, which are distributed in advance for pre-authentication, the problem of long-time revelation of authentication information has been solved.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.125-133
• /
• 2010

A policy based resource management framework is proposed, that supports the optimal QoS by applying resources management function which is changed according to the status of mobile terminal and heterogeneous connections to hand-over process of mobile terminals based on heterogeneous network. To assess the performance of policy based resource management framework proposed in this thesis, in case of applying weighted policy for selecting optimal cell in hand-over occurring among duplicated heterogeneous connections, the transmission delay was remarkably enhanced as the number of multimedia sessions increased. This means, in case of QoS deterioration of multimedia session occurring in service connection, hand-over was executed with the optimal connection.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.387-394
• /
• 2004

One of the main challenges in personal communication services(PCS ) Is to locate many mobile terminals that nay move from place to place frequently. This kind of system operation is called location management. This task entails sophisticated signaling traffic and database queries. Several strategies have been proposed to improve the efficiency of location management. These strategies use location register databases to store the current locations of mobile terminals, and are vulnerable to failure of the location register databases. In this paper, we propose a fault-tolerant pointer forwarding scheme with distributed home location register in order to tolerate the failure of location registers. The performance of the proposed scheme is evaluated analytically by simulation, and Is compared with Biaz's bypass forwarding strategy and two-path forwarding strategy.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.59-64
• /
• 2009

This paper is intended to study how well the routing protocol supplied in wireless mesh networks can evade interference path along the applied routing metric. Wireless mesh networks, unlike existing network techniques, has the characteristics that node movement is less and energy effect is limited. Therefore. this type of network requires path configuring technique to reflect such network characteristics and new routing metric to determine proper path. Routing metric proposed recently is designed to produce link quality accurately, but it configures path not considering the traffic situation of adjacent nodes. Thus. this technique has the problems of reduced transfer rate and delay between terminals occurring due to frequent traffic chaos by the interference of adjacent nodes. Therefore, this paper proposes metric that configures routing path by finding like metric that can transfer data effectively by considering the traffic situation of adjacent nodes. We confirmed through simulation that the proposed routing metric reduces the delay between terminals via the path that evades the traffic interference of adjacent node.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.386-386
• /
• 2012

We studied a bilateral switching device for spin transfer torque (STT-MRAM) based on 3D device simulation. Metal/P/N+or Metal/N/P+ junction device with $30{\times}30nm2$ area which is composed of one side schottky junction at Metal/P/N+ and Metal/N/P+ provides sufficient bidirectional current flow to write data by a drain induced barrier lowering (DIBL). In this work, Junction device confirmed that write current is more than 30 uA at 2 V, It is also has high on-off ratio over 105 under read operation. Junction device has good process feasibility because metal material of junction device could have been replaced by bottom layer of MTJ. Therefore, additional process to fabricate two outer terminals is not need. so, it provides simple fabrication procedures. it is expected that Metal/P/N+ or Metal/N/P+ structure with one side schottky junction will be a promising switch device for beyond 30 nm STT-MRAM.

• Journal of information and communication convergence engineering
• /
• v.19 no.2
• /
• pp.114-119
• /
• 2021

This paper proposes a method to find an optimal T' with the most terminal of the subset of T' trees that can be connected by a given length by improving a memetic genetic algorithm within several constraints, when the set of terminal T is given to the Euclidean plane R². Constraint (1) is that a given length cannot connect all terminals of T, and (2) considers only the rectilinear layout of the edge connecting each terminal. The construction of interconnections has been used in various design-related areas, from network to architecture. Among these areas, there are cases where only the rectilinear layout is considered, such as wiring paths in the computer network and VLSI design, network design, and circuit connection length estimation in standard cell deployment. Therefore, the heuristics proposed in this paper are expected to provide various cost savings in the rectilinear layout.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.225-228
• /
• 2004

This paper has been studied about UWB(Ulra wide-band)'s LNA(Low Noise Amplifier) and Mixer. The UWB is a new technology that is being pursed for both commercial and military purposes. Direct conversion architectures that convert RF signals have potential to achieve such terminals, because they eliminate the need for non-programmable image-rejection filters and IF channel filters. And this architecture promises better performance in power, size, and cost than existing heterodyne - based receivers. This Receiver architectures combines low-noise amplifier, mixer. And then this paper has designed suitable UWB's LNA and Mixer.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.211-219
• /
• 2004

Due to rapid increases in Internet users, it becomes essential to provide well-established web services and monitor web server's load for the sake of reliable web server management. The existing web server load monitoring has been based on such cable methods as RPC, RMI, CORBA and etc. But it has the limitation in bringing information both anywhere and anytime over the Internet. This thesis is aimed to realize real-time wireless web server monitoring system based on Wireless Application Protocol (WAP). As any user can log on wirelessly to the Internet at any time through wireless terminals like PDA, the realization will make possible instant and real-time web server monitoring.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.290-300
• /
• 2008

We apply IEEE 802.3 frame burst mode (FBM) to the Ethernet passive optical network (EPON) downstream link and compare its performance with non-frame burst mode for various traffic patterns. Although in light traffic loads (p<0.5) the efficiency of the FBM mechanism is not significant, it does feature high throughput, small jitter, low queue occupancy, and short queuing delay in optical line terminals under various traffic loads with various numbers of optical network units (ONUs). The FBM performance always approaches that of full-duplex mode, especially under heavy traffic loads (p>0.5). Moreover, an increase in number of ONUs will decrease the burst performance. Our work shows that FBM scheme is very useful for EPON transmission and has low design complexity.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.119-122
• /
• 2005

A algorithm for control and performance of a pulse-density-modulated (PDM) series-resonant voltage source inverter developed for corona-dischange precesses is presented. The PDM inverter produces either a square-wave ac-voltage state or a zero-voltage state at its ac terminals to control the average output voltage under constant dc voltage and operating frequency. Moreover it can achieve zero-current-switching (ZCS) and zero-voltage-switching (ZVS) in all the operating condition for a reduction of switching lost. Even though the corona discharge load with a strong nonlinear characteristics, new high frequency resonant inverter is shown the wide range power control from 5% to 100%.