• Journal of Biosystems Engineering
• /
• 제15권4호
• /
• pp.298-309
• /
• 1990

A mathematical model was developed to simulate sideways overturning of agricultural tractor-trailer systems. Sideways overturn of a tractor-trailer system was described by oscillatory motions of the tractor with respect to the first and second tipping axes, and of the trailer with respect to the drawbar hitch point when either the tractor or trailer rides over an obstacle on slopes. By a computer simulation, critical slope angles of the ground on which the tractor-trailer system is likely to sideways overturn were evaluated under the given operational conditions. Validity of the proposed mathematical model was proved by comparing the results of computer simulation and experiment with a model tractor-trailer system. A close agreement was observed between the two results.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.28-43
• /
• 2001

Developed in these two series of paper is a complex dynamic model representing the motion of aircraft on the ground and a computer program for numerical simulation. The first part of paper presents the theoretical derivation of equations of motion of the landing gear system based on the physical principle. Developed model is 'structured' in the sense that the undercarriage system is regarded as an assembly of strut, tire, and wheel, where each component is modeled by a separate module. These modules are linked with two external modules-the aircraft and the runway characteristics-to carry out dynamic analysis and numerical simulation of the aircraft motion on the ground. Three sets of coordinate system associated with strut, wheel/tire and runway are defined, and external loads to each component and response characteristics are examined. Lagrangian formulation is used to derive the undercarriage equations of motion relative to the moving aircraft, and the resultant forces and moments from the undercarriage are transformed to aircraft body axes.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.170-177
• /
• 1997

In this study, an analysis technique using simple beam model for predicting structure crashworthiness of the passenger car side impacted with an angle by another passenger car was investigated. The simple model was composed of major beam-like side structure which carry almost all side impact load. A procedure of component collapse test, calculation of load carrying capability and dynamic simulation was carryed out sequentially. Transient dynamic algorithms and a computer program to simulate deformations and motions of the impacted car was developed. The developed procedure was applied to a 3 door passenger car side impacted with an angle of 75 degree and the analysis results show good agreements with the actual test results.

• 한국시뮬레이션학회논문지
• /
• 제9권1호
• /
• pp.67-81
• /
• 2000

In this paper, a new software package for modeling and simulating discrete-event dynamic systems is developed. The new software is a general-purpose, graphical tool based on timed Petri-nets and is developed using Visual Basic and Visual C++ for the window environment. It allows the user to graphically build a Petri-net model and enter input data for executing the Petri-net simulation model. It is equipped with a deadlock detection and recovery function as well as an automatic error check function. In addition, the software supports various enabling functions and distribution functions and provides various statistics for the performance measures of interests pertaining to the system. We expect the new software will be used in a wide number of applications including computer, communication and manufacturing systems.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• 대한산업공학회지
• /
• 제21권1호
• /
• pp.17-32
• /
• 1995

The objective of this study is to develop a general design and performance evaluation model for the system designers in the initial design phase of the integrated automatic manufacturing system based on the RAM(Reliability, Availability and Maintainability) and life cycle cost(LCC). The methodology proposed in this research includes the following two stages. First, a deterministic approach to the solution of optimal work station arrangement for the initial system configuration is considered under the assumption that the system availability is one(no failure and maintenance), and then a stochastic simulation model based on RAM and LCC is developed. Using the results of these two stage simulation, a system performance index(SPI) was developed for the performance evaluation of the proposed system. Also a computer program is developed.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2011

To estimate fuel consumption of a vehicle, a car can be tested on chassis dynamometer. In this case, test causes a lot of time and money. To predict the fuel efficiency of vehicles in the design stage or early stage of development, the development of computer simulation model is necessary. Using simulation to predict the fuel consumption, the driving model which consists of time-velocity profile and time-grade profile is necessary In this study, vehicle model is developed in MatLab/simulink to estimate real driving fuel consumption rate with time-velocity profile, time-shift gear profile and time-grade profile. Vehicle model consists of driver model, engine model, power train model, and so on. On-road vehicle tests to verify the vehicle model are carried out for analyzing the result of simulation and comparing with those of the experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.537-542
• /
• 2001

In recent engineering, the designer has become more and more dependent on computer simulation. But defining exact model using computer simulation is too expensive and time consuming in the complicate systems. Thus, designers often use approximation models, which express the relation between design variables and response variables. These models are called metamodel. In this paper, we introduce one of the metamodel, named Kriging. This model employs an interpolation scheme and is developed in the fields of spatial statistics and geostatistics. This class of interpolating model has flexibility to model response data with multiple local extreme. By reason of this multi modality, we can't use any gradient-based optimization algorithm to find global extreme value of this model. Thus we have to introduce global optimization algorithm. To do this, we introduce DE(Differential Evolution). DE algorithm is developed by Ken Price and Rainer Storn, and it has recently proven to be an efficient method for optimizing real-valued multi-modal objective functions. This algorithm is similar to GA(Genetic Algorithm) in populating points, crossing over, and mutating. But it introduces vector concept in populating process. So it is very simple and easy to use. Finally, we show how we determine Kriging metamodel and find global extreme value through two mathematical examples.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.379-392
• /
• 1996

A mathematic model was developed for the simulation of sideways overturning of agricultural tractors on slopes. The overturning motion was described as a combination of the rotational motions with respect to the first and second tipping axes using the principle of conservation of angular mementum. A stability criterion was also established in terms of angular acceleration of tractor about the second tipping axis. Verification of the proposed model was provided by comparing the stability boundaries predicted by computer simulation with those observed experimentally for an equivalent 1/6 scaled mode tractor. A good agreement was shown between the simulation and experimental results.