• 대한전기학회논문지
• /
• 제36권12호
• /
• pp.874-887
• /
• 1987

The efficiency of a synchronous motor can be substantially improved by controlling armature voltage, field excitation, and load angle on optimum values which yield minimum input power at any specified torque and speed. This improvement is particularly noticeable in the case of light loads. In addition, the control of armature input voltage improves the power factor at which the motor operates. Employed in the analysis is a new equivalent circuit model of the motor which incorporates the frequency dependent nature of the motor parameters and the effects of iron loss. The stability of synchronous motor operation is studied by applying the Nyquist stability criterion to the linearized equations which describe the behavior of the motor as the motor loads perturb about a steady-state operating point. This investigation reveals that, in some cases, the stable region of the motor is delineated from the results of a computer simulation. With a view to reducing harmonic loss and improving torque pulsation from harmonic components, a very poweful pulse amplitude modulation (PAM) method using an 16-bit microcomputer has been developed. This method has the advantages of simplicity of control algorithms and requires small memory space for storing thyristor trigger angles for a three-phase PAM inverter. The method can be used for smooth control of both modulation depth and frequency over a wide range.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.90-98
• /
• 2005

HMT is a type of continuously variable transmission which has split power flow path characteristics with gear train and hydro static unit. The benefit of improved fuel economy and high power capacity enables it to be a promising application fur large vehicles. This paper presents the analysis results including velocity, static torque, transmission efficiency and dynamic model of the HMT that is developed for city buses. The speeds or gear shafts, the static clutch torque and split power ratio for each mode are detailed here. From the analysis of HMT transmission efficiency considering the power loss in meshed gear and hydraulic unit, we can conclude that minimization of hydraulic power is necessary for improved fuel economy design. Also, the dynamic simulation result for mode shift characteristics shows that little shift shock is observed because of the synchronized rotation speed in clutch.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제16권4호
• /
• pp.7-14
• /
• 2010

The planning and design of healthcare architecture generally requires the participation and consultation of skilled experts since it has more complex space program than any other buildings. Therefore, the computer-based expert systems for the planning of healthcare architecture have been tried continuously. The recent development of BIM technologies and object-oriented CAAD systems is leading these attempts to realize gradually. Thus, this study attempts to verify whether the new evaluation model and system of the spatial layout, which are based on the validation of space program that developed in earlier studies, are applicable to real examples of design competition. Through this simulation, this study tries to find the possibility of expert systems for the planning of healthcare architecture and act as basic data for the development of new system for the integrated design environment based on BIM technologies in the near future.

• 한국CDE학회논문집
• /
• 제17권6호
• /
• pp.398-408
• /
• 2012

This paper investigates the tolerance stack-up in a commercial sliding-type mobile phone model developed by a Korean electronics company, with focus on the dimensional quality of the gap between the sliding top and the main body. The tolerance analysis in this study is done using a commercial software package, which runs Monte Carlo simulations to produce the statistical distributions of the gap size at desired locations. Such an analysis revealed that the original design did not yield the desired dimensional quality of the gap. Through a series of systematic analyses and syntheses, an improved design is proposed for the nominal dimensions and tolerances of selected features of the parts. The proposed design was validated, through tolerance analysis simulation, to meet the desired requirement of the gap quality.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1046-1054
• /
• 2014

In this paper, a hardware prototype for the 10kVA 11-level MMC was built and various experimental works were conducted to verify the operation algorithms of MMC. The hardware prototype was designed using computer simulation with PSCAD/EMTDC software. After manufactured in the lab, the hardware prototype was tested to verify the modulation algorithms to form the output voltage, the balancing algorithm to equalize the sub-module capacitor voltage, and the redundancy operation algorithm to improve the system reliability. The developed hardware prototype can be utilized for analyzing the basic operation and performance improvement of MMC according to the modulation and redundancy operation scheme. It also can be utilize to analyze the basic operational characteristics of HVDC system based on MMC.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.493-498
• /
• 2011

Optimal atomic configurations in a nanoparticle were predicted by genetic algorithm. A truncated octahedron with a fixed composition of 1 : 1 was investigated as a model system. A Python code for genetic algorithm linked with a molecular dynamics method was developed. Various operators were implemented to accelerate the optimization of atomic configuration for a given composition and a given morphology of a nanoparticle. The combination of random mix as a crossover operator and total_inversion as a mutation operator showed the most stable structure within the shortest calculation time. Pt-Ag core-shell structure was predicted as the most stable structure for a nanoparticle of approximately 4 nm in diameter. The calculation results in this study led to successful prediction of the atomic configuration of nanoparticle, the size of which is comparable to that of practical nanoparticls for the application to the nanocatalyst.

• 상하수도학회지
• /
• 제30권5호
• /
• pp.561-569
• /
• 2016

In this paper a concept of the paradigm shift in the operations of Water and Wastewater systems regarding the production and usage of water was introduced. Based on this concept the interrelationships between the water quality in the upper basin of NakDong River relative to Busan and the degree of satisfaction of the customers on the water supply service in Busan were modeled using the System Dynamics modeling methodology. SamRangJin basin area was determined as the upper basin of Busan after analyzing the relationships between the water quality of MoolGeum water intake point and water quality data of various mid- and upper water intake points along NakDong River. The amount of contaminants generated in SamRangJin basin was modeled using the Gross Regional Domestic Product in the area and the treated amount was calculated using the efficiency of wastewater treatment and the degree of improvement of environmental condition per investment. The water quality at MoolGeum water intake point was modeled to take the effects of the remaining amount of contaminants after treatment and the non-point source contaminants in SamRangJin basin. Using the developed System Dynamics model the effects of the investment for the improvement of environmental condition in SamRangJin basin were compared to the case of alternate water source development for Busan in terms of the degree of satisfaction of the customers on the water supply service in Busan.

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1469-1476
• /
• 2022

최근 심전도 (ECG) 및 광전용맥파 (PPG) 신호를 사용하여 혈압을 추정하는 많은 연구가 이루어지고 있다. 본 논문에서는 1차원 합성곱 신경망을 사용하여 실시간으로 혈압을 추정하고 모니터링 할 수 있는 모바일 시스템을 설계하고 구현하였다. 제안하는 신경망 알고리즘은 ECG 및 PPG 신호의 다양한 특징을 세밀하게 추출하도록 11개의 계층으로 구성하고 매개변수를 최적화하도록 설계되었다. 모의실험 결과는 학습한 신경망의 합성곱 커널의 개수가 많을수록 ECG 및 PPG 신호의 특성을 더 잘 나타내기 때문에 선형 회귀 모델보다 평균 제곱 오차가 적어져 더 좋은 성능을 나타내는 것으로 분석되었다. 본 연구에서 개발된 모바일 시스템은 몸에 부착된 ECG 및 PPG 센서 장치로부터 블루투스 통신으로 전송된 측정 신호를 입력받고 실시간으로 학습된 모델로 수축기 및 이완기 혈압 수치를 추정하고 그래프로 표시하게 된다.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.43-52
• /
• 2014

In weapon systems development, live fire tests have been frequently adopted to evaluate the performance of the systems under development. Therefore, it is necessary to ensure safety in the test ranges where the live fire tests can cause serious hazards. During the tests, a special care must be taken to protect the test and evaluation (T&E) personnel and also test assets from potential danger and hazards. Thus, the development and management of the range safety process is quite important in the tests of guided missiles and artillery considering the explosive power of the destruction. Note also that with a newly evolving era of weapon systems such as laser, EMP and non-lethal weapons, the test procedure for such systems is very complex. Therefore, keeping the safety level in the test ranges is getting more difficult due to the increased unpredictability for unknown hazards. The objective of this paper is to study on how to enhance the safety in the test ranges. To do so, an approach is proposed based on model-based systems engineering (MBSE). Specifically, a functional architecture is derived utilizing the MBSE method for the design of the range safety process under the condition that the derived architecture must satisfy both the complex test situation and the safety requirements. The architecture developed in the paper has also been investigated by simulation using a computer-aided systems engineering tool. The systematic application of this study in weapon live tests is expected to reduce unexpected hazards and test design time. Our approach is intended to be a trial to get closer to the recent theme in T&E community, "Testing at the speed of stakeholder's need and rapid requirement for rapid acquisition."

• 공업화학
• /
• 제9권5호
• /
• pp.768-773
• /
• 1998

금속수소 전극의 방전시 일어나는 방전과정을 설명할 수 있는 방전반응기구에 대한 수학적 모델을 제시하였다. 유한요소법을 이용하여 방전도중의 전극전위의 변화와 금속수소 입자내의 수소농도분포를 계산할 수 있는 전산모사 프로그램을 개발하였다. 방전전류의 세기, 금속수소 입자의 크기, 금속수소입자 내에서의 수소의 확산계수 및 전극의 공극률 등을 변화시키면서 해석을 실시한 바에 의하면, 이러한 인자들이 복합적으로 작용하여 금속수소전극의 방전특성을 결정하고 금속수소 입자내의 수소의 이용율에 영향을 미침을 알 수 있었다. 따라서 고율방전을 하면서도 금속수소 입자내의 수소의 이용율을 높임으로써 금속수소 전극의 방전특성을 향상시키기 위해서는 전극설계인자들의 최적화가 필요함을 확인할 수 있었다.