• KIEE International Transactions on Power Engineering
• /
• v.12A no.1
• /
• pp.1-5
• /
• 2002

This paper presents the procedure to construct equivalent model of large power system based on nonlinear time simulation responses. It consists of coherency identification, generator aggregation and network reduction. Coherency index that can be directly implemented to this procedure is proposed. Generator aggregation based on detailed model is performed. This procedure can be used to construct equivalent model in PSS/E. It is also possible to reduce the large power system directly from the nonlinear time responses. This procedure is applied to the transient stability analysis of Korea power system that now experiences rapid changes. The equivalent model is compared with the original model in its size, accuracy, speed and performance. This paper shows that the developed equivalent model is a good estimate of the original system.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2007

A steady-state simulation model for Dual-Source Heat Pump(DSHP) of 8RT was presented. A Dual-Source Heat Pump(DSHP) has been designed to make up for the conventional air source heat pumps. The performance evaluation has been conducted under internal standard test conditions such as ISO-13256-1 and KS C 9306. However, as test conditions such as entering water, indoor and outdoor air conditions could not be controlled to satisfy the standard test conditions in outdoor tests, a series of experiments have been conducted with the actual test conditions. Then, computer models for DSHP could be used for the standard condition have developed using EES program. The model was developed from basic thermodynamic principles and heat transfer relations. Most of the parameters were obtained with EES from the actual catalog data. The simulation results were in good agreement with the experiments.

• Korean System Dynamics Review
• /
• v.9 no.1
• /
• pp.155-170
• /
• 2008

The purpose of this study was to develop a system dynamics model for management of glucose metabolism disorders that demonstrated dynamic relationships between insulin and plasma glucose levels over the time. The model was developed to 1) represent the physiology of glucose metabolism for an normal adult subject, 2) to draw causal loop diagram that demonstrate feedback systems of glucose regulation in normal condition and pathologic condition of the type 2 diabetes, 3) to develop an interactive computer simulation model for management of glucose metabolism disorders. The simulation results showed the plasma glucose level for normal persons varied from 75 to 140 which was consistent with clinical findings. As an example for patients we selected a case which varied from 110 to 310. Two types of interventions were chosen to review the model; meal control and insulin administration. The simulation results for those cases also matched well with clinical findings. The developed model can be used as an effective educational tool for patients to develop healthy lifestyle choices. The results also provide a blueprint for health providers to maintain normal blood glucose levels in diabetes patients.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.2926-2935
• /
• 1993

Chip breaker selection analysis, only being possible through experimental process, was obtained by a applied equation which used an orthogonal cutting model and a basic chip deformation. This equation could present an analysis of the chip breaking phenomena without the use of an actual experimetal method, and it was applied to computer simulation and proved the validity of theory through actual experiments. From these results, an efficient method for finding the optimum conditions of chip breaking was found through an optimized theory being applied to basic program. A finite element model for simulating chip breaking in orthogonal cutting was developed and discussed. By simulation the animation of chip breaking is observed in process on the computer screen.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.43-48
• /
• 1996

We investigated the energistics of the physiological heart model by comparing predictive indexes of the myocardial oxygen consumption (MOC), such as tension-time index (R), tension-time or force-time inteual (FTI), rate-pressure product (RPP), pressure-work index, and systolic pressure-volume area (PVA) when using the electro-hydraulic left ventricular device (LVAD). We developed the model of LVAD incorporated the closed-loop cardiovascular system with a baroreceptor which can control heart rate and time-varying elastance of left and right ventricles. On considering the benefit of the LVAD, the effects of various operation modes, especially timing of assistance, were evaluated using this coupled computer model. Overall results of the computer simulation shows that our LVAD can unload the ischemic (less contractile) heart by decreasing the MU and increasing coronary flow. Because the pump ejection at the end diastolic phase of the natural heart may increase the afterload of the left ventricle, the control scheme of our LVAD must prohibit ejecting at this time. Since the increment of coronary flow is proportional to the peak aortic pressure after ventricle contraction, the LVAD must eject immediately following the closure of the aortic valve to increase oxygen availability.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.163-171
• /
• 2022

A conceptual model represents an understanding of a system that is going to be developed, which in this research, a driving simulation software to study driver behavior at signalised intersections. Therefore, video observation was conducted to examine driver compliance behaviour within the dilemma zone at signalised intersection, pertaining to driver's distance from the stop line during yellow light interval. The video was analysed using Thematic Analysis and the data extracted from it was analysed using Chi-Square Independent Test. The Thematic Analysis revealed two major themes which were traffic situation and driver compliance behaviour. Traffic situation is defined as traffic surrounding the driver, such as no car in front and behind, car in front, and car behind. Meanwhile, the Chi-Square Test result indicates that within the dilemma zone, there was a significant relationship between driver compliance behaviour and driver's distance from the stop line during yellow light interval. The closer the drivers were to the stop line, the more likely they were going to comply. In contrast, drivers showed higher noncompliant behavior when further away from stop line. This finding could help us in the development of conceptual model of driving simulation with purpose of studying driver behavior.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.61-68
• /
• 2022

The present study was based on developing an AI based model to facilitate the academic registration needs of blind students. The model was developed to enable blind students to submit academic service requests and tasks with ease. The findings from previous studies formed the basis of the study where functionality gaps from the literary research identified by blind students were utilized when the system was devised. Primary simulation data were composed based on several thousand cases. As such, the current study develops a model based on archival insight. Given that the model is theoretical, it was partially applied to help determine how efficient the associated AI tools are and determine how effective they are in real-world settings by incorporating them into the portal that institutions currently use. In this paper, we argue that voice-activated personal assistant (VAPA), text mining, bag of words, and case-based reasoning (CBR) perform better together, compared with other classifiers for analyzing and classifying the text in academic request submission through the VAPA.

• The Korean Journal of Ecology
• /
• v.8 no.4
• /
• pp.179-196
• /
• 1985

By using temperatures as a key variable, a simulation model was constructed to predict the size and developmental speed for the German cockroach population. The following three research steps were conducted to implement the individual simulation technique to represent the basic life system of the cockroach. First, informations on developmental periods and survival rates in each life stage were obtained through rearing experiments at five different temperatures. Secondly, biological parameters needed for modeling were obtained based on these rearing results. The logistic equation was applied to calculating the developmental speed, while the averages of survival rates were utilized as parameters determining population size. And thirdly, a basic life model was constratued in a stimulative framework in FORTRAN for predicting the populating development on the individual basis. For this purpose the biological characteristics, such as life stage, age in days, developmental speed, fecundity, etc., were assigned as an inherent attribute of the transactiion so that they could accompany each individual automatically all through the simulation. This gave the model flexibility and applicability in representing the isnect life system. The save memory space in computer programing, two files were utilized in translocating the individual informations each other as time proceeded. The developed model could be effectively used as a strategic tool in interpreting and managing the cockroach population. It was also suggested in this study that the individual simulation could efficiently serve as a basis to formulate a fundamental framework on which the advanced and complex life process could be built.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.210-216
• /
• 1999

Todays computer communication technology let people to do many unrealistic things possible and the use of those technologies is becoming increasingly prevalent throughout the military operation. Both DIS and ADS are welled defined computer aided military simulations. This study discusses a simulation of stochastic combat network modeling through Internet. We have developed two separate simulation models, one for clients and another for server, and validated for conducting studies with these two models. The object-oriented design was necessary to define the system entities and their relationship, to partition functionality into system entities, and to transform functional metrics into realizations derived from system component behaviors. Heterogeneous forces for each side are assumed at any battle node. The time trajectories for mean number of survivors at each node, some important combat measures, and relative difference computations between models were made. We observe and may conclude that the differences exist and some fo these are significant based on a limited number of experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.25
• /
• pp.53-62
• /
• 1992

Computer software users develop and utilize their application software by themselves since Processing methods are different by quantity and qualify of the information The developed model needs input data and error numbers generated during the testing phases. However. total error numbers of the existing model and each error time was needed as data for developing the new model. But, maximum likelihood estimation must be used to exponential model of binomial-type and estimating of parameters by using the searched data. Parameter estimation can be done with trial and error or simulation.