• 한국안전학회지
• /
• 제21권1호
• /
• pp.21-27
• /
• 2006

In this paper, object of experiment is to study on the effect parameters to obtain optimal surface roughness in face turning. Surface roughness is significantly important to be high quality of parts produced by turning process. For this purpose, the optimization of cutting parameters for face turning operation is investigated applying the Taguchi method. An orthogonal array, signal-to-noise, and the analysis of variance are employed to evaluate effect of cutting parameters for face turning. Also confirmation tests were performed to make a comparison between the results predicted from the mentioned correlations and the theoretical results. Cutting experiment is performed without cutting fluid using coated tungsten carbide insert about workpiece of SM45C. And regression analysis technique has been used to study the effects of the cutting parameters.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.118-125
• /
• 2012

CAD/CAM systems (computer-aided design / computer-aided manufacturing) used for decades in restorative dentistry have its application to implant dentistry. This study aimed to overview CAD/CAM systems used implant dentistry, especially emphasizing custom implant abutments manufacturing. CAD/CAM custom abutments present the advantages of being specific to each patient and providing a better fit than the stock and cast custom abutments. This cutting edge technology of virtual-designed and computer-milled implant abutments will likely replace traditional implant restorative protocols and become the standard for implant dentistry in the foreseeable future.

• 대한산업공학회지
• /
• 제15권2호
• /
• pp.45-55
• /
• 1989

This paper deals with development of a computer-aided process selection and sequencing technique and its software for metal cutting processes of rotational parts. The process selection procedure consists of selection for proper machining operations and machine tools suitable for the selected operations. Machining operations are selected based on machining surface features and machine tools are selected by employing a conversion table which converts machining operations into machine tools. The process sequence is determined by the proper manipulation of the precedence relation matrix. A computer program for the proposed technique is developed by using Turbo-Pascal on IBM PC/AT compatible system. The proposed technique works well to real problems.

• 한국산업융합학회 논문집
• /
• 제11권3호
• /
• pp.135-140
• /
• 2008

This paper researched about Development Cutting Tool User Defined Module Based(PMCUDMS) on Simulation that was able to adapt themselves to rapid development of software and hardware to adopt. It is basic research that develops a scheme whereby technic make property. This paper theorized about to realize Cutting Tool User Defined Module Based on Simulation which is developing CNC Software flows from building Windows XP operating system's image that is possible realtime acting and multitasking to correct. And Cutting Tool User Defined Module Based on Simulation component which was consisted of basis OS, NC Code parser, Servo Motor Control, Simulator, Man-Machine Interface.

• 전자공학회논문지SC
• /
• 제42권1호
• /
• pp.1-11
• /
• 2005

본 연구에서는 다양한 재료의 시트(Sheet)를 각각 절단하여 적층하는 방법으로 기존 적층조형법과는 다른 쾌속 임의형상제작 시스템인 CAFL/sup VM/(Computer Aided Fabrication of Lamination for Various Material)을 제안한다. 이러한 조형 방법은 가공 속도를 빠르게 하며 복잡한 후처리 과정을윽 대폭 줄일 수 있고, 여러 가지 재료가 사용 가능한 장점을 지니고 있다. 이러한 목적으로 개발된 2자유도의 X-Y테이블 형태의 CAFL/sup VM/은 레이저빔으로 시트(Sheet)를 절단, 적층하여 조형물을 완성하는 새로운 고속적층 시스템으로 가능성을 검증하였다. 하지만 2자유도 시스템은 X-Y 평면을 이동하는 작업공간에 수직으로 레이저 가공이 이루어지는 방법으로, 조형된 사물의 표면에 계단 형상이 나타나는 표면정밀도상의 문제점을 드러낸다. 이러한 문제점을 해결하고자 2자유도에 3자유도를 추가한 5자유도 시스템을 제안하여 레이저의 경사절단이 가능하게 함으로서 조형된 사물의 표면 정밀도를 높이고, 일정한 패턴의 모양을 갖는 조형물 가공의 경우 여러 시트(Sheet)가 적층되는 부분을 한번에 가공할 수 있도록 하여 보다 빠르고 정밀한 5자유도 매니퓰레이터 CAFL/sup VM/ 시스템을 설계한다. 즉, 정속경로제어와 경사각절단제어를 구현하고 그 외에 수반된 자동화 CAFL/sup VM/ 시스템을 구현하는 것이 본 논문의 목적이다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.111-117
• /
• 2016

The cutting performance of a developed small-angle spindle tool was investigated with Al6061 using a TiAlN coated high-speed steel end mill. Up-cut and down-cut processes in a milling machine were carried out at the range of 1000-4000 rpm for spindle speed and 50-300 mm/min for feed rate. As a result, the highest cutting force in the Fx direction was obtained from the up-cut process when the spindle speed was 1000 rpm and the feed rate was 100 mm/min. In the Fy direction, the highest cutting force appeared in the up-cut process at a feed rate of 250 mm/min at the same spindle speed. Conversely, the lowest cutting force came out in the up-cut process at a spindle speed of 4000 rpm and a feed rate of 50 mm/min. As for surface finish, the finest surface roughness was obtained as Ra 0.7642 um at a spindle speed of 4000 rpm and a feed rate of 50 mm/min. Consequently, given the cutting performance of the developed small-angle spindle tool, we conclude that its use in industrial practice is feasible.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.200-205
• /
• 1988

본 연구는 와이어 컷 방전가공을 위한 자동프로그래밍 시스템 오토 컷 (AUTO-CUT)의 개발에 관한 것으로 저자가 수행했던 연구를 확장한 것이다.

• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.274-278
• /
• 2014

가공정밀도 요구특성의 지속적인 향상에도 불구하고, 공작기계와 절삭공구를 이용한 절삭가공공정에서의 채터진동은 아직도 개선의 여지가 많이 남아있다. 특히, 더욱 고속화, 고정밀화 되고 있는 가공현장에서 채터진동의 효과적인 감소대책에 대한 다양한 연구가 필요하다. 본 연구에서는 이러한 문제점을 해결하기 위해 고정밀 공구동력계를 이용한 실시간 절삭력 측정과 유한요소해석 방법을 이용해 사용 빈도와 활용이 매우 큰 터닝센터(turning center)에서 폭넓게 적용되고 있는 3종의 절삭공구 툴링에서의 채터진동 특성을 평가하여, 공구형상 및 툴링 특성에 따른 채터진동과의 상관성을 연구하고, 향후 채터진동 저감형 공구개발을 위한 근간 기술자료로 활용코자 한다.

• 동력기계공학회지
• /
• 제3권4호
• /
• pp.63-68
• /
• 1999

The determination of the optimal machining parameters in metal cutting, such as cutting speed, feed rate, and depth of cut, is an important aspect in an economic manufacturing process. The main objective in general is either to minimize the production cost or to maximize the production rate. Also there are constraints on all the machining operations which put restrictions on the choice of the machining parameters. In this paper as an objective function the production cost is considered with two constraints, surface finish and cutting power. Genetic Algorithm is applied to determine the optimum machining parameters, and the effectiveness of the applied algorithm is demonstrated by means of an example, turning operation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.11-14
• /
• 2001

In all Rapid Prototyping(RP) processes, computer-aided design(CAD) solid model is sliced into thin layers of uniform, but not necessarily constant, thickness in the building direction. Each cross-sectional layer is successively deposited and, at the same time, bonded onto the previous layer, the stacked layers form a physical part of the model. The objective of this study is to develop a method for obtaining necessary coordinates$(x,\;y,\;\theta_x,\;\theta_y)$ to position linear hotwire of the cutting system in three-dimensional space for the Variable Lamination Manufacturing process (VLM-S), which utilizes expandable polystyrene foam sheet as part material. In order to examine the applicability of the developed method to VLM-S, various three-dimensional shapes, such as a spanner, a patterned columm, and a pyramid were made using data obtained from the method.