Browse > Article

A Study on Analysis of Parameter for Optimal Surface Quality in Face Turning  

Maeng, Min-Jae (Division of Computer Aided Mechanical Engineering, Dong Seoul College)
Jang, Sung-Min (Department of Mechanical Engineering, Yuhan College)
Publication Information
Journal of the Korean Society of Safety / v.21, no.1, 2006 , pp. 21-27 More about this Journal
Abstract
In this paper, object of experiment is to study on the effect parameters to obtain optimal surface roughness in face turning. Surface roughness is significantly important to be high quality of parts produced by turning process. For this purpose, the optimization of cutting parameters for face turning operation is investigated applying the Taguchi method. An orthogonal array, signal-to-noise, and the analysis of variance are employed to evaluate effect of cutting parameters for face turning. Also confirmation tests were performed to make a comparison between the results predicted from the mentioned correlations and the theoretical results. Cutting experiment is performed without cutting fluid using coated tungsten carbide insert about workpiece of SM45C. And regression analysis technique has been used to study the effects of the cutting parameters.
Keywords
face turning; taguchi method; orthogonal array; signal-to-noise ratio; regression analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kuljanic, E., 'Face Turning on CNC Lathe', Annals of the CIRP, Vol. 40, 1991
2 Yang, W. H., and Tarng, Y. S., 'Design optimization of cutting parameters for turning operations based on the Taguchi method', Journal of Materials Processing Technology, Vol. 84, pp. 122-129, 1998   DOI   ScienceOn
3 Hong, M. S., and Lian, Z. M., 'The optimal selection of cutting parameters in turning operations', Transaction of NAMRI/SME, Vol. XXIX, pp. 319-325, 2001
4 Agha, S. R., and Liu, C. R., 'Experimental study on the performance of super finish hard turned surfaces in rolling contact', Wear, Vol. 244, pp. 52-59, 2000   DOI   ScienceOn
5 Kishawy, H. A., and Elbestawi, M. A., 'Effects of process parameters on material side flow during hard turning', International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1017-1030, 1999   DOI   ScienceOn
6 Poulachon, G., Moisan, A., and Jawahir, I. S., 'Toolwear mechanism in hard turning with polycrystalline cubic boron nitride tools', Wear, Vol. 250, pp. 576-586, 2001   DOI   ScienceOn
7 Kim, G. H., Go, J. B., Kim., H. B., and Won, J. H., 'A Study of Aluminum Reflector Manufacturing in Diamond Turning Machine', KSMTE, Vol. 11, No. 4, pp. 1-5, 2002
8 Nam, Y. S., Cho, J. R., Kim, C. S., and Jung, Y. G., 'Monitoring of Chatter Vibration using Neural Network in Turing Operation', KSPE, Vol. 18, No. 4, pp. 72-77, 2001