• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.3
• /
• pp.64-71
• /
• 1989

In this paper, a computer program for simulation of 4 cycle diesel engines including intake and exhaust manifold system is developed. The wave action theory is applied for optimization of the intake and exhaust manifold system. The calculation results of this computer program is finely accurate and agreed well with experimental results. Accordingly, it is recognized that the developed computer program can be utillized very usefully for the design of intake and manifold system. And then, influential factors of the engine performance in the design of intake manifold is numerically investigated by the calculation only. As the results it is concluded that the inertia one of the dynamic effects on the intake and exhaust maninfold affects mainly the engine performance and the pulsation one is a side effect.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.73-79
• /
• 2017

In this paper, we propose a design and implementation of a DB system for providing comprehensive information retrieval service about social economic information. We classify social economic organizations into 6 major categories and 35 small categories. The DB contains 25,938 social economic organizations in total. The DB system provides simple and intuitive interface for searching information such as keyword search, category search and initial search. Fully loaded time of webpage of implemented DB system achieved 2.3s by Vancouver, Canada Server.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1678-1688
• /
• 2016

This paper presents a capacitive power transfer (CPT) system using a Class-E resonant inverter. A Class-E resonant inverter is chosen because of its ability to perform DC-to-AC inversion efficiently while significantly reducing switching losses. The proposed CPT system consists of an efficient Class-E resonant inverter and capacitive coupling formed by two flat rectangular transmitter and receiver plates. To understand CPT behavior, we study the effects of various coupling distances on output power performance. The proposed design is verified through lab experiments with a nominal operating frequency of 1 MHz and 0.25 mm coupling gap. An efficiency of 96.3% is achieved. A simple frequency tracking unit is also proposed to tune the operating frequency in response to changes in the coupling gap. With this resonant frequency tracking unit, the efficiency of the proposed CPT system can be maintained within 96.3%-91% for the coupling gap range of 0.25-2 mm.

• Transactions of Materials Processing
• /
• v.5 no.1
• /
• pp.61-71
• /
• 1996

A computer-aided process design system for axisymmetric deep drawing products has been developed. An approach to the system is based on the knowledge based system. Knowledges for the system are formulated from the plasticity theory handbooks experimental results and empirical knowhow of the field experts. the system is composed of four main modules such as geometrical design test & rectification and user modification. The input to the system is final sheet-metal object geometry and the output from the system is process sequence with intermedi-ate objects geometries and process parameters, such as drawing load blank holding force clearance cup-drawing coefficient.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.361-364
• /
• 2005

Recently, many companies and consumers are using Internet to sell and buy goods and manage their businesses. And for most companies, they have Electronic Commerce system and Enterprise Resource Planning (ERP) system. But the two systems manage separately and the data are not integrative. So it is hard to mangement the system alike and the costs may be higher than the system which has intergrated information. ebXML-based Electronic Catalog (e-Catalog) can provide intergrated information. In this paper, we took a manufacturing industry company for example. We planned to construct the e-Catalog System, analyze the products of the company as well as design e-Catalog system using ebXML to connect EC with ERPs.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.529-533
• /
• 2008

Mission Computer performs important role both managing a whole system and dealing with a specific mission in avionics system. In general, the fault of SPOF(Single Point Of Failure) in unity system can lead to failure of whole system. It can cause a failure of a mission and also can threaten to the life of the pilot. So, in this paper, we design the HA(High-availability) system so that dealing with the failure. And we use HA software like Heartbeat, Fake, DRBD and Bonding to managing HA system.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.176-182
• /
• 2023

Optical coherence tomography (OCT) is being developed to guide various ophthalmic surgical procedures. However, the high cost of the intraoperative OCT system limits its availability mostly to the largest hospitals and healthcare systems. In this paper, we present a design and evaluation of a low-cost intraoperative common-path free-hand scanning OCT system. The lensed fiber imaging probe is designed and fabricated for intraocular use and the free-hand scanning algorithm that could operate at a low scanning speed was developed. Since the system operates at low frequencies, the cost of the overall system is significantly lower than other commercial intraoperative OCT systems. The assembled system is characterized and shows that it meets the design specifications. The handheld OCT imaging probe is tested on multilayer tape phantom and ex-vivo porcine eyes. The results show that the system could be used as an intraoperative intraocular OCT imaging device.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.924-927
• /
• 2002

In this paper we proposed the design space exploration environment of re-configurable hybrid systems and evaluate the performance by changing design parameters. With this, we analyzed the effect of various scheduling methods which determine how we allocate hardware/software resources to application program. A simple static (fixed) mapping strategy produces almost the same performance compared with a sophisticated dynamic mapping strategy especially when a CPU is already busy with its pre-assigned own tasks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.13-23
• /
• 1999

This paper deals with manufacturing process design of a simplified gun tube applying CE principle. A concept and characteristics of CE, mathematical model for understanding interaction between design and manufacturing, basic elements and related equations for process planning and cost estimating are introduced. A Knowledge-based Computer-Aided Process Planning System(KCAPPS) is constructed, yielding optimal production cost/time for the shape input and selection of appropriate machines and tools.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.82-85
• /
• 1987

The objective of this paper is to develop computer programs to aid in the design and analysis of control systems in which nonlinear characteristics exist. Control systems are dynamic systems, which can be described using various mathematical models. A convenient model for digital computer simulation is the state model in which described using a set of linear and non linear first order differential equations. The digital simulation was performed on a IBM PC/XT personal computer, and the computer language was BASIC. There are four possible configurations from which a user may choose. When running a program, the user is asked to enter the system parameters according to a specified control system configurations are; 1. A control system with a nonlinear element followed by a plant in a feedback configurations(NLSVF1). 2. A control system with a nonlinear device situated between two plants in a feedback configurations(NLSVF2). 3. A control system with a nonlinear element followed by a plant, followed by a the dealy in feedback configurations(TLAG). 4. A motor and load with a backlash nonlinearity between dynamic portions of the motor/load configurations (BACKLASH). The matrix from state equations are integrated using combination the trapezoidal method and fixed point iteration. Several cases which have nonlinearity were implemented on the computer and the results were discussed.