• 한국의학물리학회지:의학물리
• /
• 제20권4호
• /
• pp.199-207
• /
• 2009

Computed Radiography (CR) 시스템에서 영상의 신뢰성과 재현성을 높이기 위해서는 영상 획득 과정의 마지막 단계에서 이루어지는 나트륨램프의 소거에 의한 Image Plate (IP)의 완전한 초기화가 매우 중요하다. 본 연구에서는 CR (Agfa CR 25; Agfa, BELGIUM)을 이용하여 잠상의 소거 후 지연시간에 따른 노이즈의 평가, 소거량에 따른 잠상의 소거 후 노이즈의 평가, 그리고 American Association of Physicist in Medicine (AAPM) Report 93 (2006)의 CR acceptance test 중 erasure thoroughness 평가를 시행하였다. 임상에서 주로 쓰이는 Chest postero-anterior (PA), Hand PA, L-spine lateral을 촬영 후 스캔하였다. Chest PA와 L-spine lateral은 Chest phantom (3D-torso; CIRS, USA)을 이용하여 촬영했고 Hand PA는 피검자를 통해 촬영되었다. 실험 결과 Hand PA를 제외한 나머지 unexposed image에서 지연시간이 길어질수록 전반적으로 ghost image를 비롯한 noise가 증가하였으며, overexposure된 부분을 따라 ghost image가 나타났다. 지연시간에 의해 야기된 noise에 의한 영향은 육안으로 확인되지 않았다. 픽셀 값의 standard deviation (SD)은 overexposure 된 부분이 상대적으로 높게 측정되었다. 잠상의 소거 정도에 따른 영상의 noise평가 결과 Hand PA, Chest PA는 소거 정도 값이 높아져도 noise는 증가하지 않았다. 그러나 상대적으로 조사선량이 큰 L-spine lateral은 기준 소거 정도보다 낮을 경우 noise가 발생하였다. Erasure thoroughness 평가 결과 학과 내 CR 장비의 잠상소거능력은 기준치에 부합함을 확인하였다. 본 연구가 IP 초기화에 기초적인 자료를 제공함으로써 신뢰성 있는 영상을 획득하는데 기여할 것으로 기대한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제34권1호
• /
• pp.27-33
• /
• 2011

과학 기술의 발달로 인해 의료 방사선 장비 또한 첨단화 되고 있으며 정확한 진단과 치료를 할 수 있게되어 의료의 질적 향상은 물론 양적인 면에서도 그 사용이 날로 증가하고 있는 추세이다. 특히 환자 피폭선량에 대부분을 차지하는 CT(Computed Tomography) 촬영의 건수는 크게 증가하고 있다. 치과 방사선 검사의 경우 정확한 병변 진단을 위한 CT 및 CBCT(Cone Beam Computed Tomography) 의 도입으로 과거에 비해 환자는 많은 선량을 받게 되었다. 본 연구에서는 인체 팬텀과 TLD-100H를 이용하여 치과 방사선 검사별 조직의 흡수선량을 측정하고 ICRP 60, 103에 따라 유효선량을 계산하였다. ICRP 60, 103에 따른 유효선량 값은 파노라마 검사의 경우 $5.1{\mu}Sv$, $29.5{\mu}Sv$, 세팔로 검사의 경우 $11.2{\mu}Sv$, $14.4{\mu}Sv$, 이며 CBCT는 상악골의 경우 $53.7{\mu}Sv$, $209.6{\mu}Sv$, 하악골은 $129{\mu}Sv$, $391.5{\mu}Sv$ 그리고 CT에서는 상악골의 경우 $93.3{\mu}Sv$, $139.5{\mu}Sv$이며 하악골은 $282.7{\mu}Sv$, $489.7{\mu}Sv$로 평가 되었다. CBCT 검사의 경우 유효선량은 CT 검사에 비해서는 적지만 파노라마 검사 및 세팔로 검사에 비해서는 높게 평가되었다.

• Imaging Science in Dentistry
• /
• 제47권1호
• /
• pp.17-24
• /
• 2017

Purpose: The purpose of this study was to assess the accuracy, sensitivity, and specificity of the diagnosis of incipient furcation involvement with periapical radiography (PR) and 2 cone-beam computed tomography (CBCT) imaging protocols, and to test metal artifact interference. Materials and Methods: Mandibular second molars in 10 macerated pig mandibles were divided into those that showed no furcation involvement and those with lesions in the furcation area. Exams using PR and 2 different CBCT imaging protocols were performed with and without a metallic post. Each image was analyzed twice by 2 observers who rated the absence or presence of furcation involvement according to a 5-point scale. Receiver operating characteristic (ROC) curves were used to evaluate the accuracy, sensitivity, and specificity of the observations. Results: The accuracy of the CBCT imaging protocols ranged from 67.5% to 82.5% in the images obtained with a metallic post and from 72.5% to 80% in those without a metallic post. The accuracy of PR ranged from 37.5% to 55% in the images with a metallic post and from 42.5% to 62.5% in those without a metallic post. The area under the ROC curve values for the CBCT imaging protocols ranged from 0.813 to 0.802, and for PR ranged from 0.503 to 0.448. Conclusion: Both CBCT imaging protocols showed higher accuracy, sensitivity, and specificity than PR in the detection of incipient furcation involvement. Based on these results, CBCT may be considered a reliable tool for detecting incipient furcation involvement following a clinical periodontal exam, even in the presence of a metallic post.

• Imaging Science in Dentistry
• /
• 제47권1호
• /
• pp.25-31
• /
• 2017

Purpose: The aim of this study was to compare the diagnostic accuracy of previously trained endodontists in the detection of artificially created periapical lesions using cone-beam computed tomography (CBCT) and digital periapical radiography (DPR). Materials and Methods: An ex vivo model using dry skulls was used, in which simulated apical lesions were created and then progressively enlarged using #1/2, #2, #4, and #6 round burs. A total of 11 teeth were included in the study, and 110 images were obtained with CBCT and with an intraoral digital periapical radiographic sensor (Instrumentarium dental, Tuusula, Finland) initially and after each bur was used. Specificity and sensitivity were calculated. All images were evaluated by 10 previously trained, certified endodontists. Agreement was calculated using the kappa coefficient. The accuracy of each method in detecting apical lesions was calculated using the chisquare test. Results: The kappa coefficient between examiners showed low agreement (range, 0.17-0.64). No statistical difference was found between CBCT and DPR in teeth without apical lesions (P=.15). The accuracy for CBCT was significantly higher than for DPR in all corresponding simulated lesions(P<.001). The correct diagnostic rate for CBCT ranged between 56.9% and 73.6%. The greatest difference between CBCT and DPR was seen in the maxillary teeth (CBCT, 71.4%; DPR, 28.6%; P<.01) and multi-rooted teeth (CBCT, 83.3%; DPR, 33.3%; P<.01). Conclusion: CBCT allowed higher accuracy than DPR in detecting simulated lesions for all simulated lesions tested. Endodontists need to be properly trained in interpreting CBCT scans to achieve higher diagnostic accuracy.

• 한국방사선학회논문지
• /
• 제5권6호
• /
• pp.421-426
• /
• 2011

본 연구는 CR영상에서 선량이 화질에 미치는 영향을 평가하기위해 수행되었다. 본 연구의 궁극적인 목적은 임상 흉부진단에 필요한 영상화질을 얻을 수 있는 최적 선량을 찾는 것이다. 영상화질 평가를 위해서 다양한 선량에서의 MTF, NNPS, 그리고 NEQ를 측정하였으며, MTF 측정과 실험장치 구성은 International Electrotechnical Commission(IEC)에서 제시한 절차에 따라 수행하였다. 실험 결과를 통해 흉부진단의 경우 자동노출조절 (Automatic Exposure Control, AEC) 제어반에서 자동으로 설정해주는 선량의 절반 선량으로도 필요한 영상화질이 얻어짐을 알 수 있었다. 본 연구를 통해 AEC에서 제시하는 선량이 최적 선량이 아니며 화질평가를 통해서 얻어진 최적 선량을 사용하면 환자의 피폭을 상당량 줄일 수 있음을 보였다.

• Imaging Science in Dentistry
• /
• 제49권3호
• /
• pp.191-199
• /
• 2019

Purpose: To compare the diagnostic ability of undergraduate dental students to detect maxillary sinus abnormalities in panoramic radiographs(PR) and cone-beam computed tomography (CBCT). Materials and Methods: This was a retrospective study based on the evaluation of PR and CBCT images. A pilot study was conducted to determine the number of students eligible to participate in the study. The images were evaluated by 2 students, and 280 maxillary sinuses were assessed using the following categories: normal, mucosal thickening, sinus polyp, antral pseudocyst, nonspecific opacification, periostitis, antrolith, and antrolith associated with mucosal thickening. The reference standard was established by the consensus of 2 oral radiologists based on the CBCT images. The kappa test, receiver operating characteristic curves, and 1-way analysis of variance with the Tukey-Kramer post-hoc test were employed. Results: Intraobserver and interobserver reliability showed agreement ranging from substantial (0.809) to almost perfect (0.922). The agreement between the students' evaluations and the reference standard was reasonable (0.258) for PR and substantial(0.692) for CBCT. Comparisons of values of sensitivity, specificity, and accuracy showed that CBCT was significantly better(P<0.05). Conclusion: CBCT was better than PR for the detection of maxillary sinus abnormalities by dental students. However, CBCT should only be requested after a careful analysis of PR by students and more experienced professionals.

• ETRI Journal
• /
• 제44권5호
• /
• pp.816-825
• /
• 2022

Nondestructive testing, which can monitor a product's interior without disassembly, is becoming increasingly essential for industrial inspection. Computed laminography (CL) is widely used in this application, as it can reconstruct a product, such as a printed circuit board, into a three-dimensional (3D) high-magnification image using X-rays. However, such high-magnification scanning environments can be affected by minute vibrations of the CL device, which can generate motion artifacts in the 3D reconstructed image. Since such vibrations are irregular, geometric corrections must be performed at every scan. In this paper, we propose a geometry calibration method that can correct the geometric information of CL scans based on the image without using geometry calibration phantoms. The proposed method compares the projection and digitally reconstructed radiography images to measure the geometric error. To validate the proposed method, we used both numerical phantom images at various magnifications and images obtained from real industrial CL equipment. The experiment results confirmed that sharpness and contrast-to-noise ratio (CNR) were improved.

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.391-397
• /
• 2011

용접부에 대한 품질 확보를 위하여 방사선투과시험을 실시하고 있으나 기존의 방사선투과시험은 필름을 사용한 아날로그 방법을 적용하고 있는데 비용과 시간이 많이 소요되고 시험 공정이 복잡하여 개선이 요구되고 있다. 본 연구에서는 용접부에 대한 디지털 방사선투과영상과 아날로그 방사선투과영상의 상질을 비교한 결과, 디지털 방사선투과영상은 디지털 영상 개선 과정으로 인하여 필름 영상에 비해 보다 세밀한 관찰을 할 수 있었다. 따라서 디지털 방사선투과시험이 개선이 요구되고 있는 기존 필름에 의한 방사선투과시험을 대체할 수 있을 것으로 평가된다.

• 한국임상수의학회지
• /
• 제19권3호
• /
• pp.383-386
• /
• 2002

Intranasal tumors were diagnosed in 21 dogs for 5 years. Sneezing, nasal discharge, nasal bleeding were the most common clinical signs. Diagnosis was performed by blood test, histological examination, radiography, and computed tomography. Among the 27 nasal tumors, adenocarcinornas, squamous cell carcinomas, and chondrosarcomas were relatively common. Breeds with nasal tumor were shetland sheepdog, mongrel, and shiba. The dogs were treated by surgical resection, radiotherapy, chemotherapy, cryosurgery, and radiofrequency ablation. Each therapy alone was not effective, but the combination of two or more therapies had good effects on progression of tumor and made the survival time extended.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.30.1-30.7
• /
• 2015

Background: The inferior alveolar nerve (IAN) may be injured during extraction of the mandibular third molar, causing severe postoperative complications. Many methods have been described for evaluating the relative position between the mandibular third molar and the inferior alveolar canal (IAC) on panoramic radiography and computed tomography, but conventional radiography provides limited information on the proximity of these two structures. The present study assessed the benefits of three-dimensional computed tomography (3D-CT) prior to surgical extraction of the mandibular third molar, to prevent IAN damage. Methods: This retrospective study included 4917 extractions in 3555 patients who presented for extraction of the mandibular third molars. The cases were classified into three groups, according to anatomical relationship between the mandibular third molars and the IAC on panoramic radiography and whether 3D-CT was performed. Symptoms of IAN damage were assessed using the touch-recognition test. Data were compared using the chi-square test and Fisher's exact test. Results: Among the 32 cases of IAN damage, 6 cases were included in group I (0.35 %, n = 1735 cases), 23 cases in group II (1.1 %, n = 2063 cases), and 3 cases in group III (0.27 %, n = 1119 cases). The chi-square test showed a significant difference in the incidence of IAN damage between groups I and II. No significant difference was observed between groups I and III using Fisher's exact test. In the 6 cases of IAN damage in group I, the mandibular third molar roots were located lingual relative to the IAC in 3 cases and middle relative to the IAC in 3 cases. The overlap was ${\geq}2mm$ in 3 of 6 cases and 0-2 mm in the remaining 3 cases. The mean distance between the mandibular third molar and IAC was 2.2 mm, the maximum distance 12 mm, and the minimum distance 0.5 mm. Greater than 80 % recovery was observed in 15 of 32 (46.8 %) cases of IAN damage. Conclusions: 3D-CT may be a useful tool for assessing the three-dimensional anatomical relationship and proximity between the mandibular third molar and IAC in order to prevent IAN damage during extraction of mandibular third molars.