• Title/Summary/Keyword: Computed Correlation

Search Result 782, Processing Time 0.03 seconds

Evaluation of temperatures and flow areas of the Phebus Test FPT0

  • Koji Nishida;Naoki Sano;Seitaro Sakurai;Michio Murase
    • Nuclear Engineering and Technology
    • /
    • v.56 no.3
    • /
    • pp.886-892
    • /
    • 2024
  • The cladding temperatures and axial mass distribution computed by MAAP5 were compared with their measured values in the test bundle of the Phebus Test FPT0. The computed cladding temperatures were in good agreed with the measured values in the pre-transient phase. In the transient heat-up phase, the computed temperatures were overestimated by the Baker-Just correlation in MAAP5, but the computed temperatures could simulate the subsequently measured values. The computed mass distribution in the axial direction was in qualitative agreement with the measured one for post-test fuel damage observations. The calculated flow areas of inner and outer regions in the test bundle were compared with the photographic observations. MAAP5 computed them at the height of 0.2 m where the molten pool formed was in qualitative agreement with the photographic observations. It was found that the remaining steam flow paths might be caused by the gas-liquid two-phase flow counter-current flow limitation.

Correlation between degree of pain at the emergency room and progression of appendicitis based on computed tomography (응급실 방문 당시 통증 정도와 computed tomography 기반 충수염 진행 정도와의 상관관계)

  • Ryu, Hyoung Sun;Shin, Su Jeong
    • Journal of The Korean Society of Emergency Medicine
    • /
    • v.29 no.6
    • /
    • pp.656-662
    • /
    • 2018
  • Objective: Acute appendicitis is one of the most urgent surgical problems. Several factors have been considered as predictors of perforation, but this study focused on the change in pain pattern. The degree of pain and progression of appendicitis were analyzed assuming that the pain intensity would increase until the perforation and the degree of pain would decrease immediately after the perforation occurred. Methods: In this study, 385 out of 467 patients, who were diagnosed with appendicitis in a single institution and aged between 15 and 65 years, were reviewed retrospectively. The patients' pain scores and the diameters of appendices were analyzed along with the accompanying complications. Correlation analysis and a Student's t-test were performed. Results: In patients with complicated appendicitis, the mean numerical rating scale (NRS) was slightly higher than that of simple appendicitis, but there was no significant difference in the absolute value. Only the size of the appendix showed meaningful differences according to the combined computed tomography findings. The NRS distribution or appendiceal size did not correlate with the time duration from symptom onset. Conclusion: The appendiceal size tended to increase with progressing appendicitis. No significant correlation was observed between the patient's pain level and complications. The time duration from symptom onset did not show a relationship with the progression of appendicitis.

Soft Tissue Measurement Method Using Radiopaque Material on Cone-beam Computed Tomography: An Ex Vivo Validation Study

  • Lee, Hae-Seok;Yun, Jeong-Ho;Lee, Dong-Won
    • Implantology
    • /
    • v.22 no.4
    • /
    • pp.210-218
    • /
    • 2018
  • Purpose: The purpose of this study was to investigate the validity and reproducibility of a method based on cone-beam computed tomography (CBCT) technology for the visualization and measurement of gingival soft-tissue dimensions. Material and Methods: A total of 66 selected points in soft-tissue of the ex vivo head of an adult pig were investigated in this study. For the measurement of radiographic thickness (RT), wet soft-tissue surfaces were lightly covered with barium sulfate powder using a powder spray. CBCT was taken and DICOM files were assessed for soft-tissue thickness measurement at reference points. A periodontal probe and a rubber stop were used for the measurement of trans-gingival probing thickness (TPT). After flap elevation, actual thickness of soft-tissue (actual thickness, AT) was measured. Correlation analysis and intraclass correlation coefficients analysis (ICC) were performed for AT, TPT, and RT. Results: All variables were distributed normally. Strong significant correlations of AT with RT and TPT values were found. The two ICC values between TPT vs. AT and RT vs. AT differed significantly. Conclusion: Our results indicated that correlation of RT was stronger than that of TPT with AT. We concluded that soft tissue measurement with CBCT could be a reliable method, compared to the trans-gingival probing measurement method.

Dental age estimation using cone-beam computed tomography: A systematic review and meta-analysis

  • Faezeh Yousefi;Younes Mohammadi;Mehrnaz Ahmadvand;Parnian Razaghi
    • Imaging Science in Dentistry
    • /
    • v.53 no.2
    • /
    • pp.91-99
    • /
    • 2023
  • Purpose: This systematic review aimed to investigate the correlation between chronological age and dental pulp volume in cone-beam computed tomography (CBCT). Materials and Methods: The literature was searched in 4 databases(PubMed, Scopus, Web of Science, and Google Scholar). Within each study, the outcome of interest was the correlation (r) between chronological age and pulp volume. A random-effect meta-analysis was conducted. Subgroup analysis was carried out according to sex and tooth type. Results: Of 5,693 identified studies, 27 fulfilled the inclusion criteria and were selected for meta-analysis. These articles focused on single-rooted teeth (n=21), multi-rooted teeth (n=6), maxillary teeth (n=14), mandibular teeth (n=6), and maxillary and mandibular teeth (n=12). The relationship between chronological age and dental pulp volume was examined in the entire population (r= -0.67), men (r= -0.75), and women (r= -0.77) in single- and multi-rooted teeth. The results of the total population analysis showed a relatively strong negative relationship between age and pulp volume. Conclusion: This study suggested that CBCT is a reliable and repeatable tool for dental age estimation. A strong inverse relationship was observed between pulp chamber volume and age. Further studies on the correlation between chronological age and pulp volume of multi-rooted teeth may be beneficial.

Correlation Analysis of Reduction for Intra-Articular Calcaneal Fracture and Clinical Outcomes Using Postoperative Computed Tomography (수술 후 컴퓨터 단층촬영을 이용한 관절 내 종골 골절의 정복과 임상 결과 간의 연관성 분석)

  • Eom, Joon-Sang;Joo, Young-Deuk;Kim, Seong-Jun;Shin, Min-Ho;Lee, Dong-Oh;Jung, Hong-Geun
    • Journal of Korean Foot and Ankle Society
    • /
    • v.18 no.4
    • /
    • pp.165-172
    • /
    • 2014
  • Purpose: We evaluated the correlation of postoperative clinical outcomes and radiologic findings using computed tomography and simple X-ray in intra-articular calcaneal fractures. Materials and Methods: The current study is based on 41 feet, 38 patients with displaced intra-articular fracture who underwent surgical treatment with at least one year of follow-up. Evaluation of clinical outcome included American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) score, and subjective satisfaction. A simple X-ray was used in evaluation of preoperative and postoperative Gissane angle, B${\ddot{O}}$hler angle, and calcaneal fracture width. Computed tomography scan was performed for evaluation of preoperative and postoperative articular step-off and articular gap in all cases. Finally, we evaluated the correlation of the postoperative clinical outcomes and radiologic findings based on the measurement. Results: The average postoperative AOFAS score and VAS score was $84.1{\pm}8.5$ and $2.2{\pm}2.2$. Subjective satisfaction was excellent in 15 cases, good in 19 cases, and fair in seven cases. The average B${\ddot{O}}$hler angle was restored from $11.1^{\circ}$ to $24.7^{\circ}$(p<0.05), Gissane angle was changed from $121.0^{\circ}$ to $119.0^{\circ}$ (p>0.05), and the average width was restored from 45.8 to 35.0 mm (p<0.05). The average articular step-off and gap were decreased from 6.3 to 2.0 mm and from 11.1 to 4.6 mm, respectively (p<0.05). No significant correlations were observed between the clinical outcome and Gissane angle, B${\ddot{O}}$hler angle, and width, and there was no significant correlation between the clinical outcome and Sanders classification. However, postoperative articular step-off showed correlation with VAS and AOFAS score and articular gap showed correlation with VAS score. Conclusion: The clinical outcome did not show correlation with B${\ddot{O}}$hler angle and Gissane angle but did show correlation with anatomical reduction of the posterior facet joint.

Correlation of Intuitionistic Fuzzy Sets

  • Son, Mi-Jung
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.17 no.4
    • /
    • pp.546-549
    • /
    • 2007
  • When we deal with crisp data, it is common to find the correlation between variables. In this paper, we propose a method to calculate the correlation coefficient for intuitionistic fuzzy data, by adopting the concepts from the conventional statistics. The value of the correlation coefficient computed from our formula not only provides us the strength of the relationship of intuitionistic fuzzy sets, but also shows that the intuitionistic fuzzy sets are positively or negatively related.

Analysis of Global Gravitational Models based on measured gravity data (육상 중력자료 기반의 전 지구 중력장 모델 분석)

  • Choi, Kwang-Sun;Lee, Young-Cheol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.9
    • /
    • pp.1833-1839
    • /
    • 2011
  • In this study, Global Gravitational Model EGM2008, EGM96 and 16,786 gravity points measured on land were compared and analyzed. On the assumption that land gravity data is most accurate, the correlation coefficient, differences, MSE and difference variance along the height were computed between land gravity data and EGM2008, EG96. The correlation coefficient, land gravity data and EGM2008, was computed most largely with 0.824 and the correlation coefficient with EGM96 was computed with 0.538. The standard deviation of differences between land gravity and EGM2008, EGM96 were 13.196 magl, 18.685 mgal respectively. Also the difference variance scope of EGM2008 was smaller than EGM96. There was no large variance of free-air anomaly differences between land gravity data and EGM2008 along the height however free-air anomaly differences with EGM96 varied along the height changes. Consequently EGM2008 nicely expresses Korea gravity field more than EGM96.

Factors Associated with Treatment Duration Time of Forced Eruption in Impacted Maxillary Canines Using 3-Dimensional Computed Tomography (의도적 맹출술이 시행된 상악 매복 견치의 치료기간과 관련된 용인에 대한 3차원 단층촬영을 이용한 분석)

  • Kim, Min Su;Kim, Hyoung-Woo;Lee, Seung-Soo;Lee, Eui-Mook;Choi, Bo Young;Kim, Bong Chul;Lee, Jae In;Yoon, Jung-Hoon;Lee, Jun
    • The Journal of the Korean dental association
    • /
    • v.51 no.6
    • /
    • pp.346-354
    • /
    • 2013
  • Early identification of maxillary canine impaction is very important, because of treatment duration time. Analysis used by 3-dimensional computed tomography is more important than before in treatment planning. The aim of this study was to analysis of factors associated with the treatment during time of forced eruption of the impacted maxillary canine using 3-dimensional computed tomography. 17 patients were analysed in Daejeon dental hospital of Wonkwang university(16 patients with unilateral impactions and 1 patient with bilateral impaction). In total, 18 maxillary impacted cannines were analysed by 3-dimensional computed tomography. The results obtained were as follow; 1. There was positive correlation between the age of patient and treatment duration time. 2. There was positive correlation between the distance of occlusal plane to cusp of maxillary impacted canine and treatment duration time, and negative correlation between the length of maxillary impacted canine and treatment duration time. 3. There was positive correlation between the angulation of midsagittal plane to axis of maxillary impacted canine and treatment duration time, and negative correlation between occlusal plane to axis of maxillary impacted canine and treatment duration time. In conclusion, age, tooth length, distance from the canine cusp tip to the occlusal plane, angulation of tooth axis to occlusal plane and midsagittal plane allow that we can predict treatment duration time.

Correlation between mandibular morphology and masticatory muscle thickness in normal occlusion and mandibular prognathism

  • Kim, Tae-Ho;Kim, Chul-Hwan
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.46 no.5
    • /
    • pp.313-320
    • /
    • 2020
  • Objectives: The aim of this study was to evaluate the relationship between masticatory muscle thickness and mandibular morphology in young Korean adults with normal occlusion and mandibular prognathism. Patients and Methods: Multidetector computed tomography (MDCT) was used to measure the masticatory muscle thickness on the right side in 100 Korean young adults (50 normal occlusion group, 50 mandibular prognathism group). Cephalometric analysis was done to measure mandibular morphology. Pearson correlation analysis was done to investigate the relationship between the masticatory muscle thickness and mandibular morphometry. Results: The four masticatory muscles showed positive correlation with intergonial width in all subjects. All muscles, except temporalis, positively correlated with height of the ramus and mandibular length. Positive correlation was also observed in all muscles, except medial pterygoid, with thickness of the ramus. In the normal occlusion group, all four masticatory muscles showed positive correlation with intergonial width and ramus thickness. Positive correlation was also observed in all muscles (except lateral pterygoid) with mandibular length. Masseter and lateral pterygoid positively correlated with height of the ramus. In the mandibular prognathism group, all masticatory muscles, except lateral pterygoid, showed positive correlation with intergonial width. The masseter muscle showed negative correlation with ANB. Conclusion: The results suggest a positive correlation of the thickness of masticatory muscles with both horizontal and vertical dimensions of the mandible. However, thickness of the masseter was found to decrease in patients with increasing severity of mandibular prognathism.

Position of the hyoid bone and its correlation with airway dimensions in different classes of skeletal malocclusion using cone-beam computed tomography

  • Shokri, Abbas;Mollabashi, Vahid;Zahedi, Foozie;Tapak, Leili
    • Imaging Science in Dentistry
    • /
    • v.50 no.2
    • /
    • pp.105-115
    • /
    • 2020
  • Purpose: This study investigated the position of the hyoid bone and its relationship with airway dimensions in different skeletal malocclusion classes using cone-beam computed tomography (CBCT). Materials and Methods: CBCT scans of 180 participants were categorized based on the A point-nasion-B point angle into class I, class II, and class III malocclusions. Eight linear and 2 angular hyoid parameters(H-C3, H-EB, H-PNS, H-Me, H-X, H-Y, H-[C3-Me], C3-Me, H-S-Ba, and H-N-S) were measured. A 3-dimensional airway model was designed to measure the minimum cross-sectional area, volume, and total and upper airway length. The mean crosssectional area, morphology, and location of the airway were also evaluated. Data were analyzed using analysis of variance and the Pearson correlation test, with P values <0.05 indicating statistical significance. Results: The mean airway volume differed significantly among the malocclusion classes(P<0.05). The smallest and largest volumes were noted in class II (2107.8±844.7 ㎣) and class III (2826.6±2505.3 ㎣), respectively. The means of most hyoid parameters (C3-Me, C3-H, H-Eb, H-Me, H-S-Ba, H-N-S, and H-PNS) differed significantly among the malocclusion classes. In all classes, H-Eb was correlated with the minimum cross-sectional area and airway morphology, and H-PNS was correlated with total airway length. A significant correlation was also noted between H-Y and total airway length in class II and III malocclusions and between H-Y and upper airway length in class I malocclusions. Conclusion: The position of the hyoid bone was associated with airway dimensions and should be considered during orthognathic surgery due to the risk of airway obstruction.