• The Research Journal of the Costume Culture
• /
• v.31 no.1
• /
• pp.91-106
• /
• 2023

This study examines how the concept of gender fluidity-viewing gender identity as a fluid and wide spectrum-is represented in modern knit fashion collections. The period spring/summer 2017-fall/winter 2021, when gender-related fashion keywords started attracting attention, was limited to the last five years, and the results of a case analysis focused on a total of 357 knit fashion photos are as follows. First, the androgynous compromise through the mixing of heterogeneous elements appears as a mix-and-match style due to the patchwork of heterogeneous materials and forms that borrow or share masculinity and femininity. Second, it was confirmed that the dismantling exaggeration caused by the destruction of the size and form of clothes was an avant-garde image that exaggerated the size or length of clothes or destroyed ideas and forms. Third, the exposed sensuality caused by the deformation of the fluid knitting technique was shown in the form of proudly expressing sexuality by exposing the body either using the cut-out technique or through the loose texture of the knit. Knit fashion can highlight decorative effects using handcrafted techniques and express a detailed or coarse sense of organization depending on the density. In addition, since it is possible to create a complex image by juxtaposing and mixing various knit structures, it was confirmed that it is a suitable material for expressing gender fluidity flowing between men and women in fashion.

• Journal of Applied Reliability
• /
• v.14 no.3
• /
• pp.182-190
• /
• 2014

This paper presents new practical accelerated life test plans with different censoring times at three levels of stress for Weibull and lognormal lifetime distributions, respectively. The proposed plans are compared with the corresponding two-level statistically optimal plans and three-level compromise and practical plans. Computational results indicate that new practical plans have been more precise and effective than the existing three-level plans under a constraint of total testing time. In addition, a procedure to determine useful ALT plans is illustrated with a numerical example.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.168-174
• /
• 2004

A shift algorithm of an automatic transmission is decided by the compromise between the performance and the fuel economy of the vehicle. But because in the traditional shia algorithm, throttle opening and vehicle speed are used to decide the shift points, the actual load of the vehicle is not exactly considered. In this paper, to consider the actual load, that is, the road grade and the vehicle acceleration, the longitudinal accelerometer is used to decide the shift points. As the result, the performance and the fuel economy of the vehicle which adapts the new shift algorithm are shown better than the traditional one.

• Journal of Ginseng Research
• /
• v.27 no.3
• /
• pp.141-145
• /
• 2003

The multi-year production cycle for ginseng can be rapidly depreciated by inferior post-harvest activities. This research examines the character of high temperature drying regimes for North American ginseng root to assist management decision making. The objective is a very rapid drying regime, that will not result in physical or chemical damage to the root and that would not alter the actual dry root weight. Research is presented using drying temperatures of 55, 70 and 105 C. Temperatures above these rapidly cause substantive physical damage to the root samples and seriously compromise the dry root values determined. Temperatures below these behaved quite similar to actual dryer regimes (approximately 38 C). Laboratory results indicate that there are differences between the three temperature regimes tested. Careful usage of the 70 C regime, over a period of two to three days in a convection drying oven, has distinct merit.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.197-202
• /
• 1999

A mechanical face seal is a tribe-element intended to control the leakage of working fluid at the interface of a rotating shaft and its housing. The leakage of working fluid decreases as the seal surfaces get closer each other. But a very small seal clearance results in a drastic reduction of seal life because of high wear and heat generation. Therefore, in the design of mechanical face seals the compromise between low leakage and acceptable life is important and presents a difficult design problem. And the gap geometry of seal clearance affects seal performance very much and becomes an important design variable. In this study the Reynolds equation for the sealing dam of mechanical face seals is numerically analyzed using the Galerkin Finite Element Method, which can be readily applied to various seal geometries. The film pressures of the sealing dam are analyzed, including the effects of the seal face coning and tilt. Then, opening forces, restoring moments, leakages, and dynamic coefficients are calculated.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.411-412
• /
• 2002

Piston-cylinder system are widely used in power engineering applications. In reciprocating refrigeration compressors, where extremely low friction losses are required, ringless pistons are being used to diminish the friction between piston rings and cylinder wall. Since the ringless piston has the freedom of lateral motion there is a potential danger that it will occasionally hit the cylinder wall while moving up and down along it's axis. A good design must therefore provide a smooth and stable reciprocating motion of the piston and ensure that the fluid film separating the piston from the cylinder wall is maintained all times. And the compromise between refrigerant gas leakage through the piston-cylinder clearance and the friction losses is required utilizing a dynamic analysis of the secondary motion for the high efficiency compressor. To this end, the computer program is developed for calculating the entire piston trajectory and the lubrication characteristics as functions of crank angle under compressor running conditions. The results explored the effects of some design parameters and operating conditions on the stability of the piston, the oil leakage, and friction losses.

• Korean Journal of Bronchoesophagology
• /
• v.13 no.2
• /
• pp.82-84
• /
• 2007

Treatment options for anastomotic recurrence occurring after Ivor Lewis operation are limited. Reoperation for resection can be technically challenging and several reports suggest a potential survival benefit from re-resection. Specific care must be taken to avoid compromise of the previously transposed conduit to not endanger its vascular supply and the recurrent nerves in either the chest or neck. We report our surgical experience of a case of esophagogastric anastomotic site recurrence occurring after Ivor Lewis operation with review of literatures.

• Korean Journal of Adult Nursing
• /
• v.21 no.6
• /
• pp.603-616
• /
• 2009

Purpose: The purpose of this study was to examine the subjective opinions of first-generation Korean-Americans about survival. Methods: The Q-methodology which provides a method of analyzing the subjectivity of each item was used. The 34 selected Q-statements from each of 38 subjects were classified into a shape of normal distribution using a 9 point scale. The collected data was analyzed using a QUANL/WIN program. Results: Four types of survival attitudes from 38 first-generation Korean-Americans were identified. Type I was a satisfaction type based on belief, Type II was an effort type based on purpose, Type III was an isolation type based on ethnicity, and Type IV was a compromise type based on adaptation. Results of this study indicate that approaches to a minority's survival strategies need to be differentiated taking this typology and various subject characteristics into account. Conclusion: This information may provide a basic understanding for healthcare providers who work with first-generation Korean-Americans.

• Journal of Integrative Natural Science
• /
• v.9 no.2
• /
• pp.86-93
• /
• 2016

The peptide sequences, GHK(Gly-His-Lys) and KTTKS(Lys-Thr-Thr-Lys-Ser), using a collagen stimulator recently were manipulated at N-terminal as a multifunctional peptide derivative with PEG(polyethyleneglycol) linker connected to gallic acid which presents anti-inflammatory activity. The multifunctional peptide derivatives were obtained in a normal peptide preparation method through SPPS(solid phase peptide synthesis) using Fmoc chemistry and a carboxyl group insertion reaction of PEG-3,4,5-triacetoxy benzoate by using potassium tert-butoxide and ethyl bromoacetate, which was separated by Sephadex DEAE. It gave a good compromise to a cosmetic application for cell cytotoxicity, anti-wrinkle, and anti-inflammation.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.28-31
• /
• 1998

It is difficult to make an artificial central incisor similar to natural tooth. All ceramic porcelain of this patient is not esthetic, and there is gingival recession due to ill-fitted margin. She has class II division 1 occlusion, so upper central incisors is labioversed. Upper light central incisor is well-characterized but the yellowish brown color of dentin is appeared on the incisal third portion of the central incisor. At 1st trial, the shape and characterization of restoration is good but shade is little dark. At 2nd trial, the shape is better but patient complained on black triangle of mid interdental space, so mesiocervical portion of restoration is overcontoured to compromise the black triangle. Completed metal ceramic crown is in harmony with the adjacent central incisor in aspect of shape, shade, and characterization.