• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.519-529
• /
• 2009

Fiber reinforced composite materials have various advantages in mechanical and chemical aspects. Not only high fatigue and chemical resistance, but also high specific strength and stiffness are attained, and therefore, damping characteristics are beneficial to marine piles. Since piles used for marine structures are subjected to compression and bending as well, detailed research is necessary. Current study examine the mechanical behavior under flexural and/or compressive loads using concrete filled fiber reinforced plastic composite piles, which include large size diameter. 25 pile specimens which have various size of diameters and lengths were fabricated using hand lay-up or filament winding method to see the effect of fabrication method. The inner diameters of test specimens ranged from 165 mm to 600 mm, and the lengths of test specimens ranged from 1,350 mm to 8,000 mm. The strengths of the fill-in concrete were 27 and 40 MPa. Fiber volumes used in circumferential and axial directions are varied in order to see the difference. For some tubes, spiral inner grooves were fabricated to reduce shear deformation between concrete and tube. It was observed that the piles made using filament winding method showed higher flexural stiffness than those made using hand lay-up. The flexural stiffness of piles decreases from the early loading stage, and this phenomenon does not disappear even when the inner spiral grooves were introduced. It means that the relative shear deformation between the concrete and tube wasn't able to be removed.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.794-805
• /
• 2020

Objective : Teriparatide is known as an effective anabolic agent not only for severe osteoporosis but also for bone healing and union. We explored the possibility of teriparatide as an alternative treatment option for osteoporotic thoracolumbar (TL) burst fracture. Methods : This retrospective study enrolled 35 female patients with mean age of 73.77±6.71 years (61-88) diagnosed as osteoporotic TL burst fracture with ≥4 of thoracolumbar injury classification and severity (TLICS) score and no neurological deficits. All patients were treated by teriparatide only (12 of group A), teriparatide plus vertebroplasty (12 of group B), or surgical fixation with fusion (11 of group C), and followed up for 12 months. Radiological outcomes were evaluated using radiological parameters including kyphotic angle (KA), segmental vertebral kyphotic angle (SVKA), compression ratio (CR), and vertebral body height (anterior [AH], middle [MH], posterior [PH]). Functional outcomes were evaluated using visual analog scale (VAS) and Macnab classification (MC). Results : There were no statistical significant differences in age, bone mineral density (-3.36±0.73), and TLICS score (4.34±0.48) among the three groups (p>0.05). Teriparatide was administered during 8.63±2.32 months in group A and B. In 12-month radiological outcomes, there were significant restoration in SVKA, CR, AH, and MH of group B and KA, SVKA, CR, AH, and MH of group C compared to group A with no radiological changes (p<0.05). All groups showed similar significant improvements in 12-month functional outcomes, although group B and C showed a better 1-month VAS, 1-month MC, 3-month MC compared to group A (p<0.05). Conclusion : Non-surgical treatment with teriparatide showed similar 12-month functional outcomes compared to surgical fixation with fusion. The additional vertebroplasty to teriparatide and surgical fixation with fusion were more helpful to improve short-term functional outcomes with structural restoration compared to teriparatide only.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.305-314
• /
• 1989

Effect of pH variation in starting solution for the making of hydroxyapatite powder was studied in relation to the sinterability of the powder and their mechanical properties of the sintered hydroxyapatite ceramics. The sinterability of hydroxyapatite powder prepared at different pH was found to be improved with increase in pH value of the starting solutions. Thus the powders prepared from the higher pH solutions including 10.5, 11.0 and 11.5 could be well densified almost upto theoretical density by firing for 1 hr at 1,00$0^{\circ}C$. But the powder based on pH 10 exhibited less sinterability even being fired at much higher temperature of 1,10$0^{\circ}C$, it gave only 90-95% of theoretical density. On the other hand the powder prepared on the lowest pH value 9.5 could not be well densified and it could obtain only 78% of theoretical density even by firing at 1,30$0^{\circ}C$ for 1hr. It was found that prismatic crystals of whitlockite were always included in the sintered bodies based on the lower pH values as a minority crystalline phase together with the major crystalline phase of hydroxyapatite and its inclusion might impair the sinterability of powder. However in the case of the higher pH, the powder contained only hydroxyapatite as a crystalline phase on sintering without any minorities. The sphere shape of crystals might help effectively the densification of the bodies. The best mechanical properties could be obtained from the body of pH 11 sintered at 1,10$0^{\circ}C$, which gave 99.5% of theoretical density, 662Kg/$\textrm{mm}^2$ of vickers hardness and 1,352Kg/$\textrm{cm}^2$ of diameteral compression strength.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.880-894
• /
• 1997

In this paper,we propose a new algorithm to perform DCT(Discrete Cosine Transform) withn the area reduced by prdeicting position of quantization coefficients to be zero.This proposed algorithm not only decreases the enoding time and the decoding time by reducing computation amount of FDCT(Forward DCT)and IDCT(Inverse DCT) but also increases comprossion ratio by performing each diffirent horizontal- vereical zig-zag scan assording to the calssified block size for each block on the huffiman coeing.Traditional image coding method performs the samd DCT computation and zig-zag scan over all blocks,however this proposed algorthm reduces FDCT computation time by setting to zero insted of computing DCT for quantization codfficients outside classfified block size on the encoding.Also,the algorithm reduces IDCT computation the by performing IDCT for only dequantization coefficients within calssified block size on the decoding.In addition, the algorithm reduces Run-Length by carrying out horizontal-vertical zig-zag scan approriate to the slassified block chraateristics,thus providing the improverment of the compression ratio,On the on ther hand,this proposed algorithm can be applied to 16*16 block processing in which the compression ratio and the image resolution are optimal but the encoding time and the decoding time take long.Also,the algorithm can be extended to motion image coding requirng real time processing.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.159-169
• /
• 2007

The behavior of fiber-reinforced cemented sands (FRCS) was studied to improve a brittle failure mode observed in cemented sands. Nak-dong River sand was mixed with ordinary Portland cement and a Polyvinyl alcohol (PVA) fiber. A PVA fiber is widely used in concrete and cement reinforcement. It has a good adhesive property to cement and a specific gravity of 1.3. A PVA fiber has a diameter of 0.1 mm that is thicker than general PVA fiber for reinforced cement. Clean Nak-dong River sand, cement and fiber at optimum water content were compacted in 5 layers giving 55 blows per layer. They were cured for 7 days. Cemented sands with a cement/sand ratio of 4% were fiber-reinforced at different locations and tested for unconfined compression tests. The effect of fiber reinforcement form and distribution on strength was investigated. A specimen with evenly distributed fiber showed two times more strength than not-evenly reinforced specimen. The strength of fiber-reinforced cemented sands increases as fiber reinforcement ratio increases. A fully reinforced specimen was 1.5 times stronger than a specimen reinforced at only middle part. FRCS behavior was controlled not only by a dosage of fiber but also by fiber distribution methods or fiber types.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.79-91
• /
• 2005

The behaviors and design procedures of wale in innovative prestressed support(IPS) system are presented in this paper. Using the theory of the beam on elastic foundation, the member forces of the wale under initial pretension are evaluated. Choosing cable tensions as redundant forces, member forces subjected to earth pressure are calculated by the statically indeterminate analysis. The computer analysis model under uniform and non-uniform earth pressure is constructed using beam element for the IPS wale, tension-only element for cable, and compression-only element for soil. Axial forces and bending moments of IPS wale under initial pretension and design earth pressure are calculated. The combined stresses due to these axial force and bending moment are estimated to satisfy the design formula.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1207-1214
• /
• 2014

The first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the encoding results of the intra frame affects the first frame as well as the following frames. Traditionally, the quantization parameter for an intra frame is determined only depending on the bpp not considering the characteristics of the intra frame. For accurate intra frame encoding, we should consider not only bpp but also the complexity of the video sequence and the output bandwidth. In this paper, we propose a real-time quantization model which is used to calculate the quantization parameter for an intra frame encoding based on the investigation on the characteristics of a GOP. It is shown by experimental results that the proposed quantization model captures the characteristics of an intra frame effectively and the proposed method for model parameters accurately estimates the real values.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.359-367
• /
• 2016

As taking pictures by using smartphones has become more common in society, there are many incidents which are unexpected manipulation of images and leak of confidential information. Because of those incidents, demands that identify forgery/alteration of image file and proves of the original copy is constantly increasing. In general, smartphone saves image file as JPEG form and it has DQT which determines a compression rate of image in a header part of image. There is also DQT in Thumbnail image which inside of JPEG. In previous research, it identified a smartphone which take image by only using DQT, However, the research has low accuracy to identify the devices. There are two main purposes in this research. First, this research will analogize a smartphone and an application that takes a picture, edits and save an image file by testing not only about a DQT information but also a information of Thumbnail image. Second, the research will build a database of DQT and Thumbnail information in JPEG file to find more accurate image file's origin.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1947-1954
• /
• 2012

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the initial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 40 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate initial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we determine the initial QP according to the ratio of the first frame to the total bits allocated to a GOP. To estimate the QP of the allocated bits, Rate-QP model is used. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JVT algorithm.