• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.349-354
• /
• 2001

The split Hopkinson pressure bar has been used for a high strain rate impact test. Also it has been developed and modified for compression, shear, tension, elevated temperature and subzero tests. In this paper, SHPB compression tests have been performed with pure titanium at elevated temperatures. The range of temperature is from room temperature to $1000^{\circ}C$ with interval of $200^{\circ}C$. To raise temperature of the specimen, a radiant heater which is composed of a pair of ellipsoidal cavities and halogen lamps is developed at high temperature SHPB test. There are some difficulties in a high temperature test such as temperature gradient, lubrication and prevention of oxidation of specimen. The temperature gradient of specimen is affected by the variation of temperature. Barreling occurred at not properly lubricated specimen. Stress-strain relations of pure titanium have been obtained in the range of strain rate at $1900/sec{\sim}2000/sec$ and temperature at $25^{\circ}C{\sim}1000^{\circ}C$.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.221-228
• /
• 2003

The stress corrosion index of Kumamoto andesite are evaluated by two types of testing method. One is the uniaxial compression test under various water vapor pressures, and the other is the double torsion (DT) test under a constant water vapor pressure. For the uniaxial compression tests, the uniaxial compressive strength increases linearly with decreasing water vapor pressure on the double logarithmic coordinates. As the results, the stress corrosion index obtained is estimated 44. On the other hand, in the DT test, the relaxation (RLX) test and the constant displacement rate (CDR) test were conducted. For the CDR test, as the displacement rate of loading point increases, the crack velocity increases. However, the fracture toughness is constant regardless of the change in displacement rate and the average fracture toughness is evaluated $2.07MN/m^{3/2}$. For the RLX test, the crack velocity-stress intensity factor curves are smooth and linear. The stress corrosion index estimated from the curves is 37. Comparing stress corrosion indexes in the uniaxial compression test and the DT test, there is no significant difference in these values, and they are considered to be in coincident each other regardless of testing methods. Therefore, it is concluded that stress corrosion is one of material constants of rock.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.691-696
• /
• 2008

본 논문은 AMR(Adaptive Multi Rate)코더의 7.4kit/s 모드를 기반으로 화자 의존적인 환경에서 더욱 압축률을 높인 새로운 켈프(CELP)계열의 코더를 제안한다. 제안된 코더는 OGM(OutGoing Message)이나 TTS(Text-To-Speech) 등 한 사람의 음성만을 필요로 하는 시스템에서 유용하게 사용할 수 있다. 새로운 코더의 압축률을 높이기 위해서 무감독 학습 신경망인 Centroid Neural Networks(CNN)를 이용한 새로운 LSP 코드북을 생성하여 사용한다. 또한 고정 코드북 탐색 단계에서 AMR 7.4 kbit/s 모드에서는 4개의 펄스를 서브프레임 마다 사용하는 대신에 새로운 코더에서는 오직 2개의 펄스만을 사용하기 때문에 압축률을 더 높일 수 있다. 이로 인해서 스피치의 질이 감소하게 되는데, 각 서브프레임 마다 예상하는 펄스를 적용함으로써 보상받을 수 있다. 제안된 보코더는 기존 AMR 7.4Kbps모드와 비교해 27% 높은 압축률을 가지는 동시에, MOS( Mean Opinion Score)의 면에서 볼 때, 대등한 음질을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.650-652
• /
• 2022

Frame rate up-conversion (FRUC) 알고리즘은 동영상의 프레임율을 향상시키는 영상 보간 기술이다. 이는 고화질 디지털 비디오 시스템에서 저프레임율 동영상으로 인한 화면 떨림이나 흐릿한 움직임 등의 문제를 해소하고 시청자에게 보다 자유롭고 매끄러운 시각 경험을 제공한다. 본 논문에서는 딥러닝 기반의 FRUC 알고리즘을 이용하여 동영상을 압축하는 기술을 제안한다. 제안 방법은 원시 동영상에서 일부 영상을 제외한 후 압축 및 전송하고, 복호화 과정에서 딥러닝 기반의 보간 방법을 이용하여 제외된 영상을 복원함으로써 고효율로 압축한다. 실험에서는 동영상을 1, 3장 단위로 건너뛰며 부호화한 후 복호된 영상과 FRUC 알고리즘에 의해 복원한 영상으로 압축 성능을 평가했다. 1장 및 3장씩 제외했을 때 실험결과는 평균 81.22%, 27.80% BD-rate 감소를 보였다. 3 장씩 제외하는 것이 1장의 제외에 비해 부호화 효율이 낮은 이유는 FRUC 방법으로 복원한 영상의 PSNR이 낮기 때문이다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.360-374
• /
• 2016

Since WSNs (Wireless Sensor Networks) applied to their application areas such as smart home, smart factory, environment monitoring, etc., depend on sensor data, the sensor data is the most important among WSN components. The resources of each node consisting of WSN are extremely limited in energy, hardware and so on. Due to these limitation, communication failure probabilities become much higher and the communication failure causes data loss to occur. For this reason, this paper proposes 2MC (Maximum/Minimum Compression) that is a method to compress sensor data by selecting circular queue-based maximum/minimum sensor data values. Our proposed method reduces sensor data losses and value errors when they are recovered. Experimental results of 2MC method show the maximum/minimum 35% reduction efficiency in average sensor data accumulation error rate after the 3 times compression, comparing with CQP (Circular Queue Compression based on Period) after the compressed data recovering.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.87-94
• /
• 2017

Steel structures often require strengthening due to the increasing life loads, or repair caused by corrosion or fatigue cracking. Carbon Fiber Reinforced Polymers (CFRP) is one of the materials used to strengthen steel structures. Most studies on strengthening steel structures have been carried out on steel beams and steel columns under centric compression load. No independent article, to the author's knowledge, has studied the effect of CFRP strengthening on steel columns under eccentric compression load, and it seems that there is a lack of understanding on behavior of CFRP strengthening on steel columns under eccentric compression load. However, this study explored the use of adhesively bonded CFRP flexible sheets on retrofitting square hollow section (SHS) steel columns under the eccentric compression load, using numerical investigations. Finite Element Method (FEM) was employed for modeling. To determine ultimate load of SHS steel columns, eight specimens with two types of section (Type A and B), strengthened using CFRP sheets, were analyzed under different coverage lengths, the number of layers, and the location of CFRP composites. Two specimens were analyzed without strengthening (control) to determine the increasing rate of the ultimate load in strengthened steel columns. ANSYS was used to analyze the SHS steel columns. The results showed that the CFRP composite had no similar effect on the slender and stocky SHS steel columns. The results also showed that the coverage length, the number of layers, and the location of CFRP composites were effective in increasing the ultimate load of the SHS steel columns.

• 한국컴퓨터산업학회논문지
• /
• 제3권8호
• /
• pp.1085-1092
• /
• 2002

일상생활에서 대부분의 정보는 시각에 의해 얻어지고 있으므로 영상 정보 처리에 관한 연구는 오래 전부터 행하여져 왔다. 영상을 디지털 정보로 표현하기 위해서는 많은 양의 데이터가 필요하며, 이를 저장하거나 전송하기 위해 데이터 압축이 필수적이다. 최근에 이르기까지 영상 압축 표준안에 채택된 대부분의 영상 압축기법들은 영상을 이루는 각 픽셀간의 상관관계를 주파수 영역으로 변환하여 압축하는 변환 부호화 방법들이 주종을 이루어 왔다. 이 방법은 약 20:1 이상의 압축비에서는 복원 영상의 왜곡 정도가 심하게 나타나며, DCT을 근간으로 하는 경우에 화질을 열화 시키는 블록킹 현상이 두드러지게 나타나는 것으로 알려져 있다. 이에 전처리과정으로 원영상을 축소 변환 후, 쿼드트리 분할 기법을 적용함으로써 압축율을 높이고, 가변적으로 크기변환과 오프셋 비트의 크기를 적용하여 효율적인 압축율을 얻기 위한 조건에 대해 연구한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.34-40
• /
• 2004

Two different type scramjet models with side-wall compression and top-wall compression inlets have been tested in HPTF (Hypersonic Propulsion Test Facility) under the experimental conditions of Mach number 5.8, total temperature 1700K, total pressure 4.5㎫ and mass flow rate 3.5kg/s. The liquid kerosene was used as main fuel for the scramjets. In order to get fast ignition in the combustor, a small amount of hydrogen was used as a pilot. A strut with alternative tail was employed for increasing the compression ratio and for mixing enhancement in the side-wall compression case. Recessed cavities were used as a flameholder for combustion stability. The combustion efficiency was estimated by one dimensional theory. The uniformity of the facility nozzle flow was verified by a scanning pitot rake. The experimental results showed that the kerosene fuel was successfully ignited and stable combustion was achieved for both scramjet models. However the thrusts were still less than the model drags due to the low combustion efficiencies.

• 융합신호처리학회논문지
• /
• 제2권1호
• /
• pp.12-18
• /
• 2001

비행기나 인공위성에 탑재된 SAR (Synthetic Aperture Radar) 레이더 또는 적외선 센서(FLIR)로 촬영한 데이터는 제한된 전송채널을 통해 신속히 전송하기 위해 데이터 압축을 필요로 하게된다. 이때 가능한 높은 압축율을 얻으면서 동시에 높은 목표물 탐지 능력을 유지하는 것이 중요하다. 본 논문에서는 서브밴드 코딩(subband coding) 과 벡터 양자화(VQ)를 이용하여 압축 알고리듬을 목표물 탐지의 예측기(predictor) 및 분류기(classifier)로 적용시킴으로써 목표물의 탐지능력을 유지하면서 효과적으로 압축할 수 있는 자동탐색기능 압축시스템(Joint ATR-compression System)을 제안하였으며 제안된 알고리듬을 사용한 경우의 시뮬레이션 결과는 200:1 이상의 높은 압축율에 대해서 비교적 높은 목표물 탐지 능력을 유지하고 있음을 나타내었다.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.25-28
• /
• 2017

The production of carbon fiber reinforced thermoplastics(CFRTP) parts using an injection/compression molding process that differs from the conventionally used fabrication methods was investigated Before the application of composite molding in the injection/compression molding process, a simple compression molding experiment was performed using a hydraulic press machine to determine the characteristics of resin impregnation and to obtain a basic physical property data for the CFRTP. Based on these results, injection/compression molded specimens were manufactured and an additional insert/over molding process was applied to improve the impregnation rate of the molded specimens. The results demonstrated that the tensile strength of the molded parts using the faster injection/compression process was similar to that of a hydraulic press molded product.