• 대한방사선기술학회지:방사선기술과학
• /
• 제22권2호
• /
• pp.9-15
• /
• 1999

The aim of this study is to measure the application of prone compression study using compression paddle for obese patients in upper gastrointestinal series. Prone compression study using compression paddle was performed in fifty patients, who were not examined completely erect compression study for obesity. The radiographs of stomach were classified into the lower, middle, and high body and then we gave five points included 'very poor', 'poor', 'suspicious', 'good', and 'complete' according to level of detection for area gastrica and mucosal fold. Statistic analysis was performed using T-test and ANOVA, and confidence rate was fixed in 95%(P<0.05) for the significance. The results were as follows : 1. The compression marks on high body was 'poor' grades in erect and prone compression study. The points were 1.64 and 1.86, respectively. 2. The compression marks on middle body was 1.68 in erect compression study, and 'suspicious' in prone compression study. 3. The compression marks on lower body was 'poor' in erect compression study, and 'good' in prone compression study. 4. There was a high statistic signification between the two study on middle and lower body except for high body(P<0.01). 5. The average abdominal thickness of subjects was 23.98 centimeter. There was no statistic signification between the difference of average marks by the abdominal thickness(P>0.05). As these results, the prone compression study in upper gastrointestinal serie seem to be an useful study for obese patients, because it decreases pain and the feeling of uneasiness, and improve compression efficiency remarkably.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1181-1192
• /
• 2008

A laboratory investigation was carried out into effects of strain rate on undrained shear behavior of Holocene clay underneath Kobe Airport with an objective to evaluate the factor of safety of the retaining structure built on it. It was examined in a series of triaxial compression and extension tests performed using different rate of axial straining. A comparative compression test in which the strain rate was changed in steps was also carried out. Similar tests were performed in constant-volume direct shear box (DSB) test. And, the deformation characteristics of the clay were also examined in order to evaluate the variation of stiffness during undrained shearing. It was found that the undrained strength increased with not only the shear rate but also the consolidation period. ISOTACH properties seemed a key to govern the undrained shear behavior.

• 한국통신학회논문지
• /
• 제39A권11호
• /
• pp.625-636
• /
• 2014

본 논문에서는 웨이브렛 계수의 비트율-왜곡 최적화 기반 블록 부호화를 사용하는 새로운 임베디드 영상 압축방법을 제안한다. 웨이브렛 계수의 크기에 따라 셋분할 부호화나 블록분할 부호화를 수행하는 기존의 임베디드 부호화 방법들과는 달리, 제안한 방법에서는 웨이브렛 계수나 블록들을 비트율-왜곡비 기댓값에 따라 정렬함으로서 비트율-왜곡 최적화를 수행하는 동시에 비트율-왜곡비 기댓값을 이용하여 최적화된 블록분할 부호화를 수행한다. 또한 제안한 방법에서는 엔트로피 부호화를 위해 웨이브렛 계수들간에 존재하는 다양한 상관관계를 이용한다. 실험 결과는 제안한 영상 압축 방법이 기존의 임베디드 부호화 방법인 SPIHT 및 EBCOT와 비교하여 각각 0.11~1.16dB 및 -0.18~0.52dB의 PSNR 성능향상을 제공함으로써 평균적으로 우수한 성능을 제공함을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.190-192
• /
• 2004

In this paper, we propose a low bit-rate embedded video compression scheme with 3-D block partition coding in the wavelet domain. The proposed video compression scheme includes multi-level 3-dimensional dyadic wavelet decomposition, raster scanning within each subband, formation of block, 3-D partitioning of block, and adaptive arithmetic entropy coding. Although the proposed video compression scheme is quit simple, it produces bit-stream with good features, including SNR scalability from the embedded nature. Experimental results demonstrate that the proposed video compression scheme is quit competitive to other good wavelet-based video coders in the literature.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.13-15
• /
• 2001

Compression test has been used to measure material flow stress due to limited capability of tensile test at the fast strain rate. Since the frictional stress unavoidable during compression test should be properly eliminated from the measured stress, calibration of the measured stress by using friction factor has been made for the flow stress measurement. Also, calibrated stresses by interrupted and continuous compression tests have been compared with the true stress measured by tensile test at $0.2\%$ carbon steel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.737-742
• /
• 2009

This research intends to clarify the engineering characteristics of compression index which plays the most important role in the calculation of consolidation settlement, based on the survey of the clay in the estuary of Nakdong River. In addition, it will analyze the parameters of soil and the correlation between the parameters and the existing relation, especially the correlation with compression index, through which it will propose a proper relation for the parameters of clay in this area. As a result of the study, the relation between the settlement and the compression rate using compression index showed 13% settlement error on the average. It is judged that this number can be used for forecasting the consolidation characteristics and the settlement for brief (preliminary) design when the difference between the execution settlement and the measuring settlement is regarded to be 15%.

• 소성∙가공
• /
• 제12권4호
• /
• pp.340-347
• /
• 2003

In the rigid-plastic finite element simulation of hot forging processes using hexahedral mesh, remeshing of a flash is important for design and control of the process to obtain desirable defect-free products. The mesh compression method is a remeshing technique which enables the construction of an effective hexahedral mesh in the flash. However, because the mesh is distorted during the compression procedure of the mesh compression method, when it is used in resuming the analysis, it causes discretization error and decreases the conversance rate. Therefore, mesh smoothing is necessary to improve the mesh quality. In this study, several geometric mesh smoothing techniques and optimization techniques are introduced and modified to improve mesh quality. Then, the most adaptive technique is recommended for the mesh compression method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.199-203
• /
• 1995

The technology of Semi-Solid Forging (SSF) has been actively developed to fabricate near-net- shape products using light and hardly formable materials, the SSF process is composed of slug heating, forming, compression holding and ejecting step. After forming step in SSF, the slug is compressed during a certain holding time in order to be completely filled in the die cavity and be accelerated in solidification rate. The compression holding time that can affect mechanical properties and shape of products is important to make decision, where it is necessary to find overall hert transfer coefficeient properly which has large effect on heat transfer between slug and die. This paper presents the procedure to predict compression holding time of octaining the final shaped part with information of temperature and solid fraction for a cylindrical slug at compression hoiding step in closed-die compression process using heat transfer analysis considering latent heat by means of finite element method. The influence of the predicted compression hoiding time on mechanical properties of products is finally investigated by experiment.

• 한국응급구조학회지
• /
• 제24권2호
• /
• pp.39-50
• /
• 2020

Purpose: This study aimed to compare the effect of chest compression and the resulting ventilation volume in walking cardiopulmonary resuscitation (CPR), straddling CPR, and mechanical CPR while moving manikins to main stretchers. Methods: We compared the chest compressions in terms of compression depth, number of incomplete releases, complete release depth, compression rate, duration between peak time of previous compression and peak time of current compression, and respiration. We analyzed the compression comparatively with the ventilation volume in three different types of CPR. Results: The chest compression depth was significantly improved during straddling CPR as compared to walking CPR, during which women were unable to achieve sufficient chest compression depth. A constant chest compression depth was maintained during mechanical CPR. Conclusion: High-quality chest compressions were difficult to achieve in moving spaces. Further, walking CPR may be helpful in men, but straddling or applying automatic chest compressions in women would result in more effective CPR. Our findings demonstrate the limitations and trends in administering CPR in men and women, which may be useful in devising better education and training methods in the future.

• 소성∙가공
• /
• 제5권2호
• /
• pp.156-164
• /
• 1996

To investigate the behavior of plastic deformation in axisymmetric extrusion through square dies, experimental works with the plasticine as a model material are carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using expermental grid distortion in extrusion is introduced to analyze the plastic flow strain rate and strain distribution. In spite of severe deformation during the extrusion through square die the visioplasticity method shows good results for the distribution of effective strain rate and effective strain.