• Geomechanics and Engineering
• /
• v.10 no.2
• /
• pp.207-224
• /
• 2016

Granulated coal ash (GCA), a mixture of the by-product from milling processes with a small amount of cement added, has recently come to be used as a new form of geomaterial. The shear strength and deformation behaviours of GCA are greatly determined by its relative density or void ratio. A series of drained triaxial compression tests were performed on cylindrical specimens of GCA at confining pressures of between 50 kPa and 400 kPa at initial relative densities of 50%, 70% and 80%. Experimental results show that a rise in relative density increases the peak shear strength and intensifies the dilation behaviour. The initial tangent modulus and secant modulus of the stress-strain curve increase with increasing initial relative density, whereas the axial and volumetric strains at failure decrease with level of initial relative density. The stress-dilatancy relationships of GCA at different relative densities and confining pressures display similar tendency. The dilatancy behaviour of GCA is modelled by the Nova rule and the material property N in Nova rule of GCA is much larger than that of natural sand.

• YAKHAK HOEJI
• /
• v.60 no.2
• /
• pp.73-77
• /
• 2016

Alginic acid and carboxymethyl cellulose sodium are dietary fibers from plants. They have a swelling property and delay the gastric emptying time, thereby resulting in feeling satiated after oral administration, which may eventually contribute to loss of body weight. The goal of this study was to compare swelling property of three commercial matrix tablets based on alginic acid and carboxymethyl cellulose sodium. When the swelling was determined by the Korean Ministry of Food and Drug Safety (MFDS) guideline, the tablet prepared by direct compression method with highly viscous swelling agent showed the highest swelling in acidic conditions. Water uptake of these tablets was rapid and completed within 30 min. Moreover, when the pH was changed from 2.5 to 6.8 buffer, the water uptake was not significantly changed in all tablets.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.119-130
• /
• 2003

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.23-35
• /
• 2004

In this work, effects of hyper-elastic rubber material properties on the indentation load-deflection curve and subindenter deformation are first examined via finite element (FE) analyses. An optimal data acquisition spot is selected, which features maximum strain energy density and negligible frictional effect. We then contrive two normalized functions, which map an indentation load vs. deflection curve into a strain energy density vs. first invariant curve. From the strain energy density vs. first invariant curve, we can extract the rubber material properties. This new spherical indentation approach produces the rubber material properties in a manner more effective than the common uniaxial tensile/compression tests. The indentation approach successfully measures the rubber material properties and the corresponding nominal stress-strain curve.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.13-18
• /
• 2014

In order to clarify the effect of Nb addition on the ductile-brittle transition property of sintered TiC, TiC-10 mol% Nb composites were researched using a three-point bending test at temperatures from room temperature to 2020 K, and the fracture surface was observed by scanning electron microscopy. It was found that the Nb addition decreases the ductile-brittle transition temperature of sintered TiC by 300 K and increases the ductility. The room temperature bending strength was maintained at up to 1800 K, but drastically dropped at higher temperatures in pure TiC. The strength increased moderately to a value of 320MPa at 1600 K in TiC-10 mol% Nb composites, which is 40% of the room temperature strength. Pores were observed in both the grains and the grain boundaries. It can be seen that, as Nb was added, the size of the grain decreased. The ductile-brittle transition temperature in TiC-10 mol% Nb composites was determined to be 1550 K. Above 1970 K, yieldpoint behavior was observed. When the grain boundary and cleavage strengths exceed the yield strength, plastic deformation is observed at about the same stress level in bending as in compression. The effect of Nb addition is discussed from the viewpoint of ability for plastic deformation.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.919-932
• /
• 2022

This study analyzed the trends of applications for patents, utility models, and designs related to leggings in order to understand the trend of development of technologies for leggings products that are continuously growing in the fashion market. In this study, trends in patent, utility model, and design applications related to leggings products filed from 2001 to 2020 with the Korean Intellectual Property Office were analyzed. As a result, first, the trends of applications for patents, utility models, and designs by year showed that the applications began to rise from 2006 and increased sharply in the 2010s. Second, applications for patents and utility models were analyzed by subject and, according to the results, the applications for compression shaping functionality were the most frequent, followed by those for construction/sewing, those for accessories and others, those for system/device, and those for multi-functionality. Third, when applications for designs were classified by target for wearing and by type of leggings, applications for general leggings designs were the most frequently filed, followed by applications for: item attachment type leggings, shapewear leggings, leggings for men, leggings for pregnant women, leggings for children, and leggings for the disabled. Although this study is limited to domestic patents, utility models, and design applications, it collected useful information related to leggings products and presented directions for future development.

• Archives of Plastic Surgery
• /
• v.51 no.1
• /
• pp.14-19
• /
• 2024

Background Hyaluronic acid fillers can be manufactured using various processes. They have multiple properties, including their concentration, degree of modification, and rheological data. Cohesion is one such property to evaluate gel integrity; however, there is no standardized method for calculating this parameter. This study aimed to evaluate different tests for calculating hyaluronic acid cohesion and discuss the importance of hyaluronic acid cohesion as a consideration when selecting fillers. Methods The cohesion levels of five different hyaluronic acid fillers with different rheological properties were evaluated and compared using the drop weight, compression, tack, and dispersion time tests. Results The cohesion tests yielded different results in the samples. Samples 2 and 4 showed approximately two times the number of droplets when compared with Sample 5 in drop weight test. Samples 1, 2, 3, and 4 were superior to Sample 5 in tack test. Samples 1, 2, and 3 showed cohesive appearances at 95 seconds in most cases in dispersion test. Rheological test results did not reflect the measures of cohesion. Conclusion Although there are no definite standardized tests to evaluate the cohesion of hyaluronic acid fillers, our proposed tests showed similar results for different hyaluronic acid filler products. Further studies are needed to evaluate the cohesion of hyaluronic acid fillers and determine the clinical use of this distinguishing characteristic for clinicians selecting the product of choice. Level of evidence statement: These data are Level IV evidence.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.33-43
• /
• 2003

In this paper, we proposed a real-time watermarking algorithm to be combined and to work with a DWT(Discrete Wavelet Transform)-based image compressor. To reduce the amount of computation in selecting the watermarking positions, the proposed algorithm uses a pre-established look-up table for critical values, which was established statistically by computing the correlation according to the energy values of the corresponding wavelet coefficients. That is, watermark is embedded into the coefficients whose values are greater than the critical value in the look-up table which is searched on the basis of the energy values of the corresponding level-1 subband coefficients. Therefore, the proposed algorithm can operate in a real-time because the watermarking process operates in parallel with the compression procession without affecting the operation of the image compression. Also it improved the property of losing the watermark and the efficiency of image compression by watermark inserting, which results from the quantization and Huffman-Coding during the image compression. Visual recognizable patterns such as binary image were used as a watermark The experimental results showed that the proposed algorithm satisfied the properties of robustness and imperceptibility that are the major conditions of watermarking.

• Composites Research
• /
• v.35 no.3
• /
• pp.134-138
• /
• 2022

In this study, Ti powder/Polymer concrete composites were processed by adding the PZT powder, one of the piezoelectric materials, to improve the vibration damping effect of Polymer concrete. Ti powder was added at a constant ratio in order to maximize the vibration damping effect using the piezoelectric effect. Three types of composite material specimens were prepared: a specimen without PZT powder, specimens with 2.5 wt% and 5 wt% of PZT powder. The vibration characteristics and compression properties were analyzed for all specimens. As a result, it was confirmed that as the addition ratio of PZT powder increased, the Inertance value at the resonant frequency decreased due to the piezoelectric effect when the vibration generated from Ti powder/polymer concrete was transmitted. Especially, the Inertance value was decreased by about 19.3% compared to the specimen without PZT at the resonant frequency. The change in acceleration with time also significantly decreased as PZT powder was added, confirming the effect of PZT addition. In addition, through the compression strength test, it was found that the degree of deterioration in compression properties due to the addition of PZT up to 5 wt% was insignificant, and it was confirmed that the powder was evenly dispersed in the composites through the cross-sectional analysis of the specimen.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.178-185
• /
• 1999

For the process control of silicon nitride gelcasting, the composition effect of acryamide system on the viscosity of slip and mechanical property of gelcast green body were investigated. The slip was prepared by ball milling of silicon nitride suspension prepared with acrylamide monomer and polyelectrolyte dispersant after premixing them by attritor. The slip mixed with initiator was vacuum deaired and cast into molds, and then polymerized. The consolidated green body was obtained by drying the gelated slip. The viscosity measument and the diametral compression test was done to evaluate the rheological behaviro of slip and mechanical property of gelcast body, respectively. Experimental results showed that the high solid loading of silicon nitride slip was obtained up to 46 vol% with a low viscosity. The mechanical property of gelcast body mainly increased with increasing the concentration of monomer. The gelcast body was machinable above the ∼3 MPa of tensile strength. The relative density of pressured-sintered body was 98.5% at 1760$^{\circ}C$, 3 h.