Multi-Spectral Camera(MSC) on the KOMPSAT-2 satellite was developed and launched as a main payload to provide 1m of GSD(Ground Sampling Distance) for one(1) channel panchromatic imaging and 4m of GSD for four(4) channel multi-spectral imaging at 685km altitude covering l5km of swath width. Since the compression on MSC image chain was required to overcome the mismatch between input data rate and output date rate JPEG-like method was selected and analyzed to check the influence on the performance. In normal operation the MSC data is being acquired and transmitted with lossy compression ratio to cover whole image channel and full swath width in real-time. In the other hand the MSC performance have carefully been handled to avoid or minimize any degradation so that it was analyzed and restored in KGS(KOMPSAT Ground Station) during LEOP(Launch and Early Operation Phase). While KOMPSAT-2 had been developed, new compression method based upon wavelet for space application was introduced and available for next satellite. The study on improvement of image chain including new compression method is asked for next KOMPSAT which requires better GSD and larger swath width In this paper, satellite image chain which consists of on-board image chain and on-ground image chain including general MSC description is briefly described. The performance influences on the image chain between two on-board compression methods which are or will be used for KOMPSAT are analyzed. The differences on performance between two methods are compared and the better solution for the performance improvement of image chain on KOMPSAT is suggested.
T-shaped column is usually used as side column in buildings, which is one of the weak members in structural system. This paper presented a quasi-static cyclic loading experiment of six specimens of reinforced concrete (RC) T-shaped columns under compression-flexure-shear-torsion combined loadings to investigate the effect in the ratio of torsion to moment (T/M) and axial compression ratio (n) and height-thickness ratio of flange plate (φ) on their seismic performance. Based on the test results, the failure characteristics, hysteretic curves, ductility, energy dissipation, stiffness degradation and strength degradation were analyzed. The results show that the failure characteristics of RC T-shaped columns mainly depend on the ratio of torsion to moment, which can be divided into bending failure, bending-torsion failure and shear-torsion failure. With the increase of T/M ratio, the torsion ductility coefficient increased, and in a suitable range, the torsion and horizontal displacement ductility coefficient of RC T-shaped columns could be effectively improved with the increase of axial compression ratio and the decrease of height-thickness ratio of flange plate. Besides, the energy dissipation capacity of the specimens mainly depended on the bending and shear energy dissipation capacity. On the other hand, the increase of axial compression ratio and the ratio of torsion to moment could accelerate the torsional and bending stiffness degradation of RC T-shaped columns. Moreover, the degradation coefficient of torsion strength was between 0.80 and 0.98, and that of bending strength was between 0.75 and 1.00.
The purpose of this study is to determine how the pre-test performed before training affects the results of CPR performance. In the case of the pre-test group(PTG), a pre-evaluation was performed for 1 minute before training, and the group that did not perform the pre-test(NPTG) performed only regular education. In both groups, skill test was performed for 1 minute after training. As a result of comparing the pre and post-test of PTG, there were statistically significant changes in chest compression depth, rate, and compression recoil. There was a statistically significant difference only in the chest compression rate in the chest compression performance results of the two groups after training. There was a statistically significant difference in the results of confidence after training in both groups. It is judged that the pre-test conducted before training has a good influence not only on the results of chest compression, but also on confidence improvement. Therefore, it is judged that it is necessary to develop additional programs such as pre-education test in order to increase the concentration of CPR education for the general population.
The Journal of Korean Academy of Orthopedic Manual Physical Therapy
/
v.26
no.2
/
pp.73-80
/
2020
Background: This study examined the effects of myofascial release exercise using an inflatable compression therapy ball on spinal flexibility in adults to present basic data to improve spinal flexibility. Methods: The participants were assigned randomly to two groups: the myofascial release exercise group (MRE, n=60) and the stretching exercise group (SE, n=60). The MRE group performed myofascial release exercise for the erector spine muscles using an inflatable compression therapy ball. The SE group performed stretching exercises of the erector spine muscles. Each exercise was performed in 3 sets of 10 repetition daily for one week. Results: The within-group comparison revealed a statistically significant difference between the pre-intervention and post-intervention measurements in only MRE group (p<.05). On the other hand, the between-group comparison revealed the MRE group to show statistically significant improvement in spinal flexibility (p<.05). In effect size, the MRE group was -1.82 (95% CI= -2.24~-1.39), and the SE group was -.7 (95% CI= -1.15~-.41). Conclusion: Myofascial release exercise for the erector spine muscles using an inflatable compression therapy ball was more effective in improving spinal flexibility than stretching exercises for the erector spinae muscles. However, although myofascial release exercise using inflatable compression therapy ball is more effective than stretching exercise, it is insignificant, and research is also insignificant. It is believed that more diverse studies using props will be needed in the future.
Muscle reduction owing to aging causes changes in physical function among the elderly. Fitness compression wear reduces fatigue by compressing the main muscles, expanding blood vessels, and rapidly discharging lactic acid. The effect of clothing pressure when wearing fitness compression wear for the elderly was objectively and subjectively evaluated for six women aged 55-64 years. The evaluation clothes were three types of tops and bottoms, one type of design (A) preferred among the existing compression wear, and two types of design (B and C). The objective evaluation items included clothing pressure, blood flow, surface temperature, and subjective satisfaction. It was found that clothing A had the highest clothing pressure in the straight posture and five fitness movements. Blood flow increased the most when wearing the evaluation clothing. The surface temperature was found to be the highest for clothing C, and subjective satisfaction was found to be the best when wearing evaluation clothing B. If the tensile strength was low and the tensile elongation was high, as in evaluation clothing B, it was recognized as appropriate clothing pressure, and the subject was subjectively satisfied. When manufacturing fitness compression wear in the future, it will be possible to increase users' objective and subjective satisfaction with wearing it, if the incision of the garment were placed at the location of the line of non-extension (LoNE), and appropriate material characteristics are applied.
Journal of the Korea Society of Computer and Information
/
v.29
no.5
/
pp.123-129
/
2024
CPR is very important to paramedics, but the chest compression performed while on the move main stretcher is less accurate. The purpose of this study is to find out the difference between performing chest compression on the side of the main stretcher using C-step and on the patient's over the belly in order to increase the effect of CPR on the main object while on the move. As a result of the study, the appropriate depth (t=4.132, p=.000) and speed (t=7.177, p=.000) were shown in the group to which the C-step was applied, and the accuracy was higher (t=6.774, p=.000). In addition, it was found that there were few location defects (t=-5.197, p=.000) and too shallow errors (t=-2.948, p=.008) in the group to which the C-step was applied. In conclusion, mounting a C-step on the main stretcher seems to help improve the quality of chest compression, and it is thought that this will increase the efficiency of chest compression.
Methods : We investigated 28 cases of patients with thoracolumbar compression fracture. We divided patients into two groups : We treated one group with complex oriental medical treatment focusing on Bee Venom Acupuncture therapy, and did the other group with complex oriental medical treatment focusing on acupuncture therapy. To investigate the effectiveness of treatment applied for two groups, we used Visual Analog Scale(VAS) and Oswestry Low-back Pain Disability Index(ODI). We compared the VAS score and ODI score of two groups statistically. Results : 1. Female is prominent in distribution of sex, the average age bracket is 70's, and the largest group was Faccidental fall in the distribution of cause. 2. In regard to level of injury, T12 was found to be most prominent, followed in turn by L1, L2. In regard to grade of clinical symptoms, Grade III was most prominent, followed by Grade IV, Grade II. 3. As a result of evaluation by using VAS score and ODI score, treatment score at final was significantly different from that at the baseline in each group. 4. After treatment, Bee Venom acupuncture therapy group showed significant difference on VAS score and ODI score compared with acupuncture therapy group. Conclusions : Bee Venom acupuncture therapy can be available for relieving symptoms related with thoracolumbar compression fracture.
Proceedings of the Korean Geotechical Society Conference
/
2000.02a
/
pp.71-78
/
2000
SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.
Transactions of the Korean Society of Mechanical Engineers A
/
v.20
no.3
/
pp.796-805
/
1996
A fabrication process using Semi-Solid Material(SSM) for casting alloy has been studied to demonstrate the possibility for mass production with controlled solid fraction. The SSM was fabricated under the various solid fractions and preheating temperatures of mold. The behaviour of a semi-solid global microstructure has been investigated under the various heating and die temperatures for solid fraction. The effect of reheating time on the globularization of SSM microstructure has been investigated in detail. And the behavior of SSM which has the solid fraction 0.5 was observed under compression. The stress strain relationship was also obtained for the compression test of semi-solid materials. The rheological behaviour of semi-solid with globule microstructure was investigated as a function of the compression velocity under isothermal holing conditions.
Journal of the Korea Society of Computer and Information
/
v.25
no.3
/
pp.169-176
/
2020
This study suggested a method to increase the quality of chest compressions in patients with cardiac arrest during transport. When providing cardiopulmonary resuscitation to a cardiac arrest patient in the pre-hospital phase, the quality of chest compressions should be improved by using a three-point fixed belt to the ambulance. Because the quality of the chest compression was increased when the 119 paramedic wears a 3-point fixed belt in addition to the chest compression method. Also, paramedics are less likely to be at risk. Therefore, if a 3-point fixed belt is worn in an ambulance during transport, 119 paramedics will be able to secure safety and provide high-quality chest compressions to cardiac arrest patients.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.