• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.153-159
• /
• 2019

In this paper, we propose a the effects of new chest compressions in the implementation of chest compressions during infant cardiopulmonary resuscitation, and to provide basic data for high-quality CPR. On March 12, 2019, the research target used the SPSS 22.0 Version as an experimental study using randomized cross-design of 30 emergency medical services students who completed BLS Health Care-provider. The study also showed significant differences in chest depth and average rate of pressure($34.61{\pm}1.29$, $39.40{\pm}1.08$, <0.001, $105.46{\pm}4.23$, $107{\pm}3.84$, <0.001) depending on chest compressions. There was also a significant difference in the convenience and degree of pain of chest compressions(<0.001). In addition, new chest compressions appeared close to vertical and showed statistically significant differences(p<.001). Based on the results of this study, we can see that the accuracy of the new chest compressions during infant cardiopulmonary resuscitation is increased, and the depth of chest compressions is improved, improving the quality index of chest compressions. However, it will be necessary to further study the use of the new chest compressions to identify the potential for clinical use.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.699-710
• /
• 2020

Pitting corrosion commonly shaped in hull structure due to marine corrosive environment seriously causes the deterioration of structural performance. This paper deals with the ultimate strength behaviors of stiffened ship panels damaged by the pits subjected to uniaxial compression. A series of no-linear finite element analyses are carried out for three stiffened panels using ABAQUS software. Influences of the investigated typical parameters of pit degree (DOP), depth, location and distribution on the ultimate strength strength are discussed in detail. It is found that the ultimate strength is significantly reduced with increasing the DOP and pit depth and severely affected by the distribution. In addition, the pits including their distributions on the web have a slight effect on the ultimate strength. Compared with regular distribution, random one on the panel result in a change of collapse mode. Finally, an empirical formula as a function of corrosion volume loss is proposed for predicting the ultimate strength of stiffened panel.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.109-117
• /
• 2007

Three-dimensional mesh models have been widely used in various applications such as simulations, animations, and e-catalogs. In such applications the normal vectors of mesh models are used mainly for shading and take up the major portion of data size and transmission time paper over networks. Therefore a variety of techniques have been developed to compress them efficiently. In this paper, we propose the MOEC (Modified Octree Encoding Compression) algorithm, which allow multi lever compression ratios for 3D mesh models. In the algorithm, a modified octree has nodes representing their own positions and supporting a depth of the tree so that the normal vectors are compressed up to levels where the shading is visually indistinguishable. This approach provides efficient in compressing normals with multi-level ratios, without additional encoding when changing in compression ratio is required.

• Computers and Concrete
• /
• 제2권2호
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

• 정보통신설비학회논문지
• /
• 제10권2호
• /
• pp.80-85
• /
• 2011

In this paper, I propose flexible base point used for a BTC(Block Truncation Coding). Halftoning images are used for printer by reducing the number of pixel depth. During over 20 years, many researches have been studied to apply this techniques to image compression. BTC algorithms are the compression methods using digital halftoning technique about images. In the BTC algorithm, an image block is divided into higher and lower domain compared with the mean of block. then the MAX and MIN representative values are evaluated by calculating the mean of higher and lower domain respectively. At a result, an image block(for example 88 size) is compressed into 64bits pixel representation and 16 bits of the MAX and MIN. And they also have been tried to sustain the image quality high after compression. In this paper, I found that there is some marginal possibility to enhance the image quality by adjusting the base point(generally mean of block) of existing algorithms.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권6호
• /
• pp.453-456
• /
• 2004

Due to the bandwidth and storage limitations medical images are needed to be compressed before transmission and storage. DICOM (Digital Imaging and Communications in Medicine) specification, which is the medical images standard, provides a mechanism for supporting the use of JPEG still image compression standard. In this paper, we explain a method for compressing medical images by PEG standard and propose two methods for JPEG compression. First, because medical images differ from natural images in optical feature, we propose a method to design adaptively the quantization table using spectrum analysis. Second, because medical images have higher pixel depth than natural images do, we propose a method to design Huffman table which considers the probability distribution feature of symbols. Simulation results show the improved performance compared to the quantization table and the adjusted Huffman table of JPEG standard.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1121-1139
• /
• 2015

In texture-plus-depth format, depth map compression is an important task. Different from normal texture images, depth maps have less texture information, while contain many homogeneous regions separated by sharp edges. This feature will be employed to form an efficient depth map coding scheme in this paper. Firstly, the histogram of the depth map will be analyzed to find an appropriate threshold that segments the depth map into the foreground and background regions, allowing the edge between these two kinds of regions to be obtained. Secondly, the two regions will be encoded through rate distortion optimization with a shape adaptive wavelet transform, while the edges are lossless encoded with JBIG2. Finally, a depth-updating algorithm based on the threshold and the depth range is applied to enhance the quality of the decoded depth maps. Experimental results demonstrate the effective performance on both the depth map quality and the synthesized view quality.

• 한국융합학회논문지
• /
• 제10권3호
• /
• pp.221-225
• /
• 2019

이 연구의 목적은 일반 대중이 심폐소생술을 쉽게 적용하기 위한 기본적인 데이터를 제공하는데 있다. 심폐소생술 마네킹과 CPR 큐브를 사용하는 두 그룹으로 나누었으며 실험에 앞서 참가자들에게는 3일 동안 실습을 동반한 심폐소생술 훈련을 실시하였고 2주 후 가슴압박에 대한 평가를 실시하였다. 참가자들은 가슴압박깊이, 가슴압박의 횟수, 가슴압박의 정확성, 불충분한 이완, 불완전한 압박위치를 기록하였다. 연구결과에서 불충분한 이완, 불완전한 압박위치는 통계적으로 유의한 차이가 있었다. 심폐소생술 교육의 확대를 위해서 CPR 큐브를 사용한다면 심폐소생술 시행 자신감과 질적인 측면에서도 유용할 것으로 생각된다.

• 한국응급구조학회지
• /
• 제22권3호
• /
• pp.67-76
• /
• 2018

Purpose: The purpose of this study was to evaluate the quality of chest compressions and ventilation when using an mechanical device(LUCAS) and 2-men manual cardiopulmonary resuscitation(CPR) performed on a minikin, as well as to propose a more effective CPR method during transit. Methods: Data were collected by LUCAS and manual virtual reality based ambulance simulation. Analysis was performed using SPSS software 12.0. The average and standard deviation of chest compression depth and ventilation were analyzed using descriptive statistics and t-test. Results: In the virtual reality based LUCAS and manual CPR results, LUCAS showed better chest compression and lower incomplete chest release than manual CPR. During CPR with a chest compression-ventilation ratio of 30:2 in virtual reality ventilation with bag-valve mask was able to deliver an adequate volume of breathing. Conclusion: It is suggested that rescuers on ambulance may consider using LUCAS as an alternative to high-quality chest compression during transit.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.87-99
• /
• 1993

본 연구에서는 비파괴 시험장비인 FWD를 사용하여 아스팔트 콘크리트 포장체 각 층의 탄성계수를 추정할 때 고려하여야 하는 가상암반층의 깊이를 FWD의 충격지속시간과 충격하중에 의한 포장체내의 압축과 속도로부터 산정할 수 있는 알고리즘을 제시하였다. 또한 FWD 시험자료를 입력치로하여 포장체 각 층의 탄성계수를 추정하는 전산 프로그램인 MFPD에 본연구에서 제시한 알고리즘을 적용 보완하였다. 보완된 MFPD의 탄성계수 추정결과에 대한 타당성을 살피기 위하여 FWD를 제작하여 현장시험을 실시하였으며 아울러 검증시험을 병행 실시하였다. 검증시험으로는 FWD 시험위치에서의 평판재하시험, 채취시료의 실내시험(마샬안정도시험, 압축시험), 표면파시험을 실시하였다. 이들 시험성과를 비교분석한 결과 가상암반층을 고려할 수 있도록 보완한 MFPD의 역산결과가 충분히 신뢰성 있음을 알 수 있었다.