• 대한의용생체공학회:의공학회지
• /
• 제31권1호
• /
• pp.56-66
• /
• 2010

The various total replacement artificial discs have developed because spinal fusion has shown a lesser mobility of an operated segment and an accelerated degeneration at adjacent discs. But almost artificial discs have not yet been reached on the substitute surgery of fusion because many problems such as those clinical success rates were not more than them of fusion have not solved. In this paper, vertically inserted assemble-screw fixture in vertebrae was proposed to improve the fixed capability of artificial disc. And also, to evaluate the design suitability of newly designed screw-type, including fixtures of commercial discs such as wedge and plate type, the 1/4 finite element model with a vertebra and various implanted fixtures were generated, and next, 3 bending motions such as flexion, bending and twisting under the moment of 10Nm and compression under the force of 1000N were considered, respectively and finally, FE analyses were performed. Results of three fixture types were compared, such as Range of Motion and maximal stress, and so on. For ROM, the screw type was average 58% less than the wedge type and was average 42% less than the plate type under all loading conditions. For average stress ratio at closer nodes between vertebra and each fixture, the wedge type was the lowest as minimum 0.02 in twisting, screw types were the highest as maximum 0.28 in compression. As the results of using cement material, it was predicted that the instability problem of the wedge type was better solved. The screw type which could be increased by implanting depth according to the number of assembling mid screws, showed that the decreased tendency of ROMs and maximal cancellous bone stresses. In further study, controlling the number of assembling screws that was suitable for a patient's bone quality, development of surgical tools and keeping on design supplementations, which will be able to develop the competitive artificial disc.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.74-79
• /
• 2015

The purpose of this study is to find out its effect on changes in the joint angle and the success rate of cardiopulmonary resuscitation by conducting cardiopulmonary resuscitation (CPR) when wearing and not wearing PPE (personal protective equipment) targeting 20 paramedics with more than 5 years of experience. The subjects carried out CPR in 30:2 for 4 minutes and collected images were digitized by Kwon3D XP Software Package(Version 4.0) and then data were obtained. Data, which were collected by analyzing the motion when starting in one cycle, when pressing to the maximum, in the final position (relaxed), were analyzed by using SPSS 18.0. In conclusion, during CPR, the angle of the both shoulder joints was not significant (p>.05) and the angle of the right elbow joint was reduced in all positions and was statistically significant (p<.05) and the angle of the left was significantly reduced in the maximum pressure posture and the final position (p>.05). In the case of the trunk, the angle increased statistically significantly at all stages (p<.01, p<.001). Also, during CPR, the average compression rate was significantly reduced after wearing PPE (p<.05) and average hand escape time by cycle increased statistically significantly (p<.05) but chest compression execution rate at the correct depth did not show any significant difference between the two groups (p>05).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.295-299
• /
• 2006

The inner-structure bonded(ISB) sheet metal is defined as a composite sheet metal which has middle layer of truss-structure between two skin sheets. The characteristics such as ultra-light weight, high rigidity, high strength, etc are required especially for automobile parts. The characteristic of ISB sheet metal depends on inner-structure pattern or method of bonding. Pyramid type of crimped expanded metal is used for inner-structure and both of resistance welding and adhesive bonding are applied to make a specimen. As a result of compression test, it is appeared that forming limit is 10% reduction in thickness under a load of 8kgf per unit element(one inner-structure). In case of uniaxial tensile test the non-uniform surface integrity rather than the buckling of inner-structure happened at a load of 450kgf, which indicates elongation of 7.2% and thickness reduction of 13%. The eye-inspection method was applied to examine the defects occurring on the specimen during stretch forming. In case of biaxial stretch forming only the non-uniform deformation on the surface of a skin sheet could be observed. The forming limit in stretching of ISB sheet metal with the hemi-spherical punch of 150mm in diameter was 3mm in forming depth and 5% reduction in thickness.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.613-618
• /
• 2008

Because the flat dilatometer (DMT) is operated in appropriate strain level, it has been known as an adoptable in-situ tool to evaluate the compressibility of soils compare with other in-situ test tools, such as SPT and CPT. This study is concerned about prediction method of constrained modulus by DMT, and a series of DMT and consolidation tests are performed at Busan new-port, Yangsan and Noksan test sites. By comparing DMT results with lab tests, the suitability of constrained modulus correlation, which is suggested by Marchetti, is investigated in Busan clay and new correlation is suggested. In lab test result, the compression indices ($C_c$) of Busan clay are turned out to be 0.4~0.12, and the constrained moduli are found out 0.5MPa~3MPa and these are increase with depth. The predicted constrained moduli using Marchetti's correlation are turned out 0.5MPa~4MPa, and these are bigger than measured constrained moduli by lab tests. By analyzing lab test and DMT results, it is shown that the correlation coefficient ($R_M=M/E_D$) has a linear relationship with (1/$I_D$) in Busan.

• 한국방사선학회논문지
• /
• 제5권6호
• /
• pp.383-389
• /
• 2011

Geant4와 DICOM 파일의 연동을 이용한 몬테카를로 시뮬레이션을 통해 실제 환자의 흡수선량을 산출하는 새로운 방법을 제시하고, Geant4 계산코드의 검증을 위해 MOSFET 선량계를 이용하여 PMMA 모의 팬텀 깊이에 따른 중심에서의 흡수선량 실측값과 Geant4 시뮬레이션 결과값을 비교하였다. PMMA slab의 불완전한 압착으로 인해 발생한 불균등한 간격의 공기층이 존재하지 않은 부분에서는 X선 조사야 $15{\times}15cm^2$와 $20{\times}20cm^2$에서 각각 $0.46{\pm}4.69%$와 $-0.75{\pm}5.19%$로 나타났다. PMMA 모의 팬텀의 불완전한 압착에 의해 나타난 오차를 제외하면 Geant4와 DICOM 파일의 연동을 통한 몬테카를로 시뮬레이션에 의한 계산값이 잘 일치함을 알 수 있다.

• Earthquakes and Structures
• /
• 제14권3호
• /
• pp.273-283
• /
• 2018

Previous experimental researches indicate that reinforced concrete beam-column joints play an important role in the mechanical properties of moment resisting frame structures, so as to require proper design. In order to get better understanding of the beam-column joint performance, a rational model needs to be developed. Based on the former considerations, two typical models for calculating the shear carrying capacity of the beam-column joint including the inelastic reinforced concrete joint model and the softened strut-and-tie model are selected to be introduced and analyzed. After examining the applicability of two typical models mentioned earlier to interior beam-column joints, several adjustments are made to get better predicting of the test results. For the softened strut-and-tie model, four adjustments including modifications of the depth of the diagonal strut, the inclination angle of diagonal compression strut, the smeared stress of mild steel bars embedded in concrete, as well as the softening coefficient are made. While two adjustments for the inelastic reinforced concrete joint model including modifications of the confinement effect due to the column axial load and the correction coefficient for high concrete are made. It has been proved by test data that predicted results by the improved softened strut-and-tie model or the modified inelastic reinforced concrete joint model are consistent with the test data and conservative. Based on the test results, it is also not difficult to find that the improved beam-column joint model can be used to predict the joint carrying capacity and cracks development with sufficient accuracy.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.438-440
• /
• 2018

심정지(Cardiac arrest)는 원인과 관계없이 심장의 박동이 정지되어 발생하는 일련의 상태를 말한다. 심장질환에 의한 심정지는 매년 우리나라 3대 사망원인에 포함되며 예측이 불가하다. 심정지 발생시 환자의 생명을 구하기 위한 유일한방법 중 하나는 심폐소생술이며 이 술기를 통하여 순환을 유지시킬 수 있다. 시각으로 받아들여진 정보는 시신경을 통하여 뇌로 전달되며, 그중 거울은 자신의 움직임과 자신의 형태를 볼 수 있게 하고, 교정과 분석이 가능하여 다양하게 활용 할 수 있다. 이에 거울을 활용한 시각적 정보에 따른 가슴압박의 질을 비교하였다. 연구결과 거울 사용에 따라 가슴압박의 평균 깊이가 유의한 차이가 있었고($48.93{\pm}6.76$, $53.86{\pm}4.56$, <0.001), 압박 대 이완 비율에도 차이를 보였다($0.87{\pm}0.13$, $0.96{\pm}0.10$, <0.002). 또한 자세를 의식하는 정도에서도 유의한 차이를 보였다($4.93{\pm}0.85$, $8.14{\pm}1.38$, <0.001).

• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.501-520
• /
• 2015

Presence of torsional loadings can significantly affect the flow of internal forces and deformation capacity of reinforced concrete (RC) columns. It increases the possibility of brittle shear failure leading to catastrophic collapse of structural members. This necessitates accurate prediction of the torsional behaviour of RC members for their safe design. However, a review of previously published studies indicates that the torsional behaviour of RC members has not been studied in as much depth as the behaviour under flexure and shear in spite of its frequent occurrence in bridge columns. Very few analytical models are available to predict the response of RC members under torsional loads. Softened truss model (STM) developed in the University of Houston is one of them, which is widely used for this purpose. The present study shows that STM prediction is not sufficiently accurate particularly in the post cracking region when compared to test results. An improved analytical model for RC square columns subjected to torsion with and without axial compression is developed. Since concrete is weak in tension, its contribution to torsional capacity of RC members was neglected in the original STM. The present investigation revealed that, disregard to tensile strength of concrete is the main reason behind the discrepancies in the STM predictions. The existing STM is extended in this paper to include the effect of tension stiffening for better prediction of behaviour of square RC columns under torsion. Three different tension stiffening models comprising a linear, a quadratic and an exponential relationship have been considered in this study. The predictions of these models are validated through comparison with test data on local and global behaviour. It was observed that tension stiffening has significant influence on torsional behaviour of square RC members. The exponential and parabolic tension stiffening models were found to yield the most accurate predictions.

• 한국응급구조학회지
• /
• 제19권3호
• /
• pp.19-32
• /
• 2015

Purpose: This study examined the effect of wearing personal protective equipment (PPE) on cardiopulmonary resuscitation (CPR), positive airway pressure, and the posture of emergency medical technicians (EMTs) when conducting CPR. Methods: Twenty 119 EMTs performed 30:2 CPR on a manikin for 4 min. Imaging data were digitized with Kwon3D XP (version 4.0). Data were collected by analyzing the motion when starting in one cycle, such as pressing to the maximum and in the final position (relaxed), and were analyzed with SPSS 18.0. Results: The angle of the elbow joints was significantly reduced (p < .05). The trunk angle was statistically significantly (p < .01, p < .001) increased. The angular velocities of the shoulder joint and left elbow joint were reduced (p > .05). The angular velocity of the trunk was significantly reduced in the starting and maximum compression postures. The hand-escape time was increased. The average compression depth was increased but not significantly (p > .05). The positive airway pressure was reduced (p > .05). Conclusion: The angle of the elbow joints and the angular velocity of the trunk were reduced, and the angle of the trunk was increased. The success of CPR and positive airway pressure was reduced.

• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2146-2152
• /
• 2008

본 논문에서는 3차원 디지털 시네마 영상의 압축을 위하여 다해상도 기반 렌더링(MultiResolution-based Rendering, MRBR) 기법을 이용한 JPEG2000 압축코덱 구조에 대하여 제안하였다. 스테레오 영상에 이산 웨이블릿 변환(discrete wavelet transform, DWT)과 다해상도의 웨이블릿 영역에서 스테레오 정합(stereo matching)기법을 적용하여 변이정보를 추출하고 기준영상과 같이 전송한다. 또한 추출된 다른 시점의 영상은 비폐색영역으로 인한 화질열화가 발생하므로 이를 보상하기 위하여 비폐색영역이 포함된 원 주파수정보와 대상 시점에서 주파수정보의 차이를 같이 전송한다. 변이정보는 변이공간에서의 동적계획법(dynamic programming)을 이용하여 추출하였다. DWT의 특성상 상위 부대역은 하위 부대역과 높은 상관성을 갖는다. 따라서 coarse-to-fine 방법을 이용하여 상위 부대역에서 얻어진 변이정보를 하위 부대역에 적용하여 탐색영역을 제한함으로써 일반적인 동적계획법에 비하여 연산량을 단축시켰으며 정확도를 향상시켰다.