• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.433-439
• /
• 2016

In this paper, we propose a optimized steganography how to improve the image degradation of the existing data hiding techniques. This method operates in the compressed domain(JPEG) of an image. Most of the current information concealment methods generally change the coefficients to hide information. And several methods have tried to improve the performance of a typical steganography method such as F5 including a matrix encoding. Those papers achieved the object of reducing the distortion which is generated as hiding data in coefficients of compressed domain. In the proposed paper we analyzed the effect of the quantization table for hiding the data in the compressed domain. As a result, it found that can decrease the distortion that occur in the application of steganography techniques. This paper provides a little (Maximum: approximately 6.5%) further improved results in terms of image quality in a data hiding on compressed domain. Developed algorithm help improve the data hiding performance of compressed image other than the JPEG.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.130-134
• /
• 2013

This paper describes the basic principles of 3D broadcast system and proposes new 3D broadcast technology that reduce the amount of data by applying CS(Compressed Sensing). Differences between Sampling theory and the CS technology concept was described. Recently proposed CS algorithm AMP(Approximate Message Passing) and CoSaMP(Compressive Sampling Matched Pursuit) was described. Image data that compressed and restored by these algorithm was compared. Calculation time of the algorithm having a low complexity is determined.

• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.123-133
• /
• 2020

Compressive sensing (CS) is a newly developed data acquisition and processing technique that takes advantage of the sparse structure in signals. Normally signals in their primitive space or format are reconstructed from their compressed measurements for further treatments, such as modal analysis for vibration data. This approach causes problems such as leakage, loss of fidelity, etc., and the computation of reconstruction itself is costly as well. Therefore, it is appealing to directly work on the compressed data without prior reconstruction of the original data. In this paper, a direct approach for modal analysis of damped systems is proposed by decomposing the compressed measurements with an appropriate dictionary. The damped free vibration function is adopted to form atoms in the dictionary for the following sparse decomposition. Compared with the normally used Fourier bases, the damped free vibration function spans a space with both the frequency and damping as the control variables. In order to efficiently search the enormous two-dimension dictionary with frequency and damping as variables, a two-step strategy is implemented combined with the Orthogonal Matching Pursuit (OMP) to determine the optimal atom in the dictionary, which greatly reduces the computation of the sparse decomposition. The performance of the proposed method is demonstrated by a numerical and an experimental example, and advantages of the method are revealed by comparison with another such kind method using POD technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.97-99
• /
• 2022

Recently, the amount of data is increasing with the development of industries and technologies. Research on the processing and transmission of large amounts of data is attracting attention. Therefore, in this paper, compressed sensing was used to reduce the amount of data and its effect on Mask R-CNN algorithm was analyzed. We confirmed that as the compressed sensing rate increases, the amount of data in the image and the resolution decreases. However, it was confirmed that there was no significant degradation in the performance of object detection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5855-5877
• /
• 2017

In view of personal health and disease management based on cost effective healthcare services, there is a growing need for real-time monitoring services. The electrocardiogram (ECG) signal is one of the most important of health information and real-time monitoring of the ECG can provide an efficient way to cope with emergency situations, as well as assist in everyday health care. In this system, it is essential to continuously collect and transmit large amount of ECG data within a given time and provide maximum user convenience at the same time. When considering limited wireless capacity and unstable channel conditions, appropriate signal processing and transmission techniques such as compression are required. However, ISO/IEEE 11073 standards for interoperability between personal health devices cannot properly support compressed data transmission. Therefore, in the present study, the problems for handling compressed data are specified and new extended agent and manager are proposed to address the problems while maintaining compatibility with existing devices. Extended devices have two PM-stores enabling compression and a novel transmission scheme. A variety of compression techniques can be applied; in this paper, discrete cosine transformation (DCT) is used. And the priority of information after DCT compression enables new transmission techniques for performance improvement. The performance of the compressed signal and the original uncompressed signal transmitted over the noisy channel are compared in terms of percent root mean square difference (PRD) using our simulation results. Our transmission scheme shows a better performance and complies with 11073 standards.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.59-63
• /
• 2014

This paper describes the basic principles of 3D broadcast system and proposes new 3D broadcast technology that reduces the amount of data by applying CS(Compressed Sensing). Differences between Sampling theory and the CS technology concept were described. Recently proposed CS algorithm AMP(Approximate Message Passing) and CoSaMP(Compressive Sampling Matched Pursuit) were described. This paper compared an accuracy between two algorithms and a calculation time that image data compressed and restored by these algorithms. As result determines a low complexity algorithm for 3D broadcast system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.460-469
• /
• 2015

This study's aim is for reducing big data transfer time of IoT healthcare devices by modulating digital bits into Manchester code including zero-voltage idle as information for secondary compressed binary cluster's compartment after two step compression of compressing binary data into primary and secondary binary compressed clusters for each binary clusters having compression benefit of 1 bit or 2 bits. Also this study proposed that as department information of compressed binary clusters, inserting idle signal into Manchester code will have benefit of reducing transfer time in case of compressing binary cluster into secondary compressed binary cluster by 2 bits, because in spite of cost of 1 clock idle, another 1 bit benefit can play a role of reducing 1 clock transfer time. Idle signal is also never consecutive because the signal is for compartment information between two adjacent secondary compressed binary cluster. Voltage transition on basic rule of Manchester code is remaining while inserting idle signal, so DC balance can be guaranteed. This study's simulation result said that even compressed binary data by another compression algorithms could be transferred faster by as much as about 12.6 percents if using this method.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.872-878
• /
• 2018

Steam tables including superheated, saturated and compressed region were simultaneously modeled using the neural networks. Pressure and temperature were used as two inputs for superheated and compressed region. On the other hand Pressure and dryness fraction were two inputs for saturated region. The outputs were specific volume, specific enthalpy and specific entropy. The neural network model were compared with the linear interpolation model in terms of the percentage relative errors. The criterion of judgement was selected with the percentage relative error of 1%. In conclusion the neural networks showed better results than the interpolation method for all data of superheated and compressed region and specific volume of saturated region, but similar for specific enthalpy and entropy of saturated region.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1431-1440
• /
• 1998

Video data are retrieved and stored in various compressed forms according to their characteristics, In this paper, we present a generic data model that captures the structure of a video document and that provides a means for indexing a video stream, Using this model, we design and implement CVIMS (the MPEG-2 Compressed Video Information Management System) to store and retrieve video documents, CVIMS extracts I-frames from MPEG-2 files, selects key-frames from the I -frames, and stores in database the index information such as thumbnails, captions, and picture descriptors of the key-frames, And also, CVIMS retrieves MPEG- 2 video data using the thumbnails of key-frames and v31ious labels of queries.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2817-2834
• /
• 2016

The existing reversible data hiding methods for block truncation coding (BTC) compressed images often utilize difference expansion or histogram shifting technique for data embedment. Although these methods effectively embed data into the compressed codes, the embedding operations may swap the numerical order of the higher and lower quantization levels. Since the numerical order of these two quantization levels can be exploited to carry additional data without destroying the quality of decoded image, the existing methods cannot take the advantages of this property to embed data more efficiently. In this paper, we embed data by shifting the higher and lower quantization levels in opposite direction. Because the embedment does not change numerical order of quantization levels, we exploit this property to carry additional data without further reducing the image quality. The proposed method performs no-distortion embedding if the payload is small, and performs reversible data embedding for large payload. The experimental results show that the proposed method offers better embedding performance over prior works in terms of payload and image quality.