• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.137-141
• /
• 2012

In order to increase recyclability of new material, aluminium-lithium alloy(Al2050-T84), the chip is compressed in the type of cylinder after machining. This study is to review the effect of environmental condition such as temperature change and salt during the transportation by sea on the corrosion at the surface and inside of the compressed chip, and an effective packing method is presented in this paper.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.315-320
• /
• 2004

Cutting fluid usually has been used in order to improve machinability, tool life, surface quality. However, problems such as pollution, costs of chip and fluid treatment caused. In this paper, compressed chilly air was used to machine aircraft parts and investigate possibility and advantage of that. The experiments were carried out in various cutting environments, such as wet and compressed chilly air. With respect to the cutting environment, compressed chilly air gave advantages such as decrease of pollution and easy chip treatment.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권1_2호
• /
• pp.125-134
• /
• 2004

최근에 프로세서-메모리간 성능격차 문제를 완화하기 위하여 내장캐시의 접근실패율을 낮추고 메모리 대역폭을 확장하는 내장캐시 압축시스템이 제안되었다. 내장캐시 압축시스템은 데이타를 압축해 저장함으로써 내장캐시의 실질적 저장공간을 확장하고, 메모리 버스에서 데이타를 압축해 전송함으로써 실질적 메모리 대역폭을 확장한다. 본 논문에서는 이와 같은 내장캐시 압축시스템을 확장해 기존의 주 메모리 압축시스템과 병합해 설계한 이종 메모리 압축시스템을 제안한다. 주 메모리의 기억공간을 효율적으로 확장하고, 내장캐시의 접근실패율을 낮추고, 메모리 대역폭을 확장하고, 압축캐시의 복원시간을 줄이고, 설계 복잡도를 낮추기 위하여 몇 가지 새로운 기법들을 제시한다. 제안하는 시스템과 비교대상 시스템의 성능은 슈퍼스칼라 구조의 마이크로프로세서 시뮬레이터를 수정하여 실행기반 시뮬레이션을 통해 검증한다. 본 논문에서 사용한 실험방법은 기존의 트레이스기반 시뮬레이션과 비교해 보다 높은 정확도를 갖는다. 실험결과 주 메모리 확장에 따른 이득을 고려하지 않은 경우에 제안하는 시스템은 일반 메모리시스템에 비하여 수행시간을 내장캐시의 크기에 따라 최대 4-23%가량 단축한다. 제안하는 시스템의 데이타 메모리와 코드 메모리의 확장비율은 각각 57-120%와 27-36%이다.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.8-14
• /
• 2005

The purposes of using cutting fluid during cutting have been cooling, lubricating, chip washing, and anti-corroding. However, the present manufacturing industry restricts the use of cutting fluid because cutting fluid contains poisonous substances which are harmful to the human body. Therefore dry cutting becomes an unavoidable assignment and a lot of researches have studied cutting methods without using cutting fluid. Because dry turning is a continuous work, tools life is reduced by continuous heat generation and surface gets rough due to reduced lubrication, so it is important to consider these situations. In this paper, the way of selecting the optimal machining condition by the minimum number of experiments and the effectiveness of using compressed air in high hardness materials through Taguchi method have been found. Dry cutting using compressed air showed better cutting characteristics than normal dry cutting with respect to by cutting force, tool wear, and surface roughness. Also, the optimal machining condition f3r dry cutting using compressed air could be selected through Taguchi method.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.175-181
• /
• 2013

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.278-283
• /
• 2013

While Built-in Spindle is working in machining center, the tool is changed by ATC(Automatic Tool Changer) automatically. However, impurities could be stacked in front of spindle because of chips formation while machining, and positional error between spindle and tool could be generated. Compressed air holes are necessary for removal of the impurities. But, the diameter and number of compressed air hole are different for each built-in spindle in market. In this paper, flow analysis is carried out to find out the efficient figuration of the compressed air hole by using velocity and pressure distributions.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.4944-4949
• /
• 2012

이 논문의 목적은 작업장에서 사용하기 위한 에어건의 개발에 관련된 것이다. 에어건은 공작기계를 사용하는 산업현장에서 공작물 칩과 절삭유의 제거를 위한 도구이다. 그리고 그것은 일반적으로 압축공기를 분사하는 용도로 사용된다. 작업자는 에어의 흡입과 분사를 위해 각각의 에어건을 준비하여야 한다. 따라서 우리는 새로운 에어건을 개발하였다. 이 논문에서 우리는 에어건의 설계와 분석을 위한 연구를 한다. 에어건은 몸체, 파이프, 개폐 유닛, 전환 유닛, 에어 튜브 그리고 조립을 위한 요소들로 구성된다. 개발된 에어건은 그 효율을 확인하기 위해 실험된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 Handout for 2000 Inter. Machine Tool Technical Seminar
• /
• pp.19-27
• /
• 2000

High speed machining (HSM), specifically end milling and ball end cutting, is attracting interest in the die/mold or aerospace industries for the machining of complex 3D surfaces. HSM of difficult-to-cut materials such as die/mold steels, titanium alloys or nickel based superalloys generates the concentrated thermal/frictional damage at the cutting edge of the tool and rapidly decreases the tool life. Following a brief introduction on HSM and reated aerospace or die/mold work, the paper reviews published data on the effect of cutter/workpiece orientation and cutting environments on tool performance. First, experimental work is detailed on the effect of cutter orientation on tool life, cutting forces, chip formation, specific force and workpiece surface roughness. Cutting was performed using 8 mm diameter PVD coated solid carbide cutters with the workpiece mounted at an angle of 45 degree from the cutter axis. A horizontal downwards cutting orientation proveded the best tool life with cut lengths ∼50% longer than for all other directions (horizontal upwards, vertical downwards, vertical upwards). Second, the cutting environments were investigated for dry, flood coolant, and compressed chilly air coolant cutting. The experiments were performed for various hardened materials and various coated tools. The results show that the cutting environment using compressed cilly air coolant provided better tool life than the flood coolant or the dry.

• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.211-214
• /
• 1988

As a muscular contraction is sustained, the power spectrum of the myoelectric signal is compressed into lower frequencies. The median frequency appears to be the prefered parameters to monitor this compression. This paper describes a technique and a device which provide an estimate of the median frequency using a TMS32020 DSP chip and IBM PC for tracking of this parameter. Results obtained from myoelectric signal are presented and discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.714-717
• /
• 1988

As a muscular contraction is sustained, the power spectrum of the myoelectric signal is compressed into lower frequencies. The median frequency appears to be the prefered parameters to monitor this compression. This paper describes a technique and a device which provide an estimate of the median frequency using a TMS32020 DSP chip and IBM PC for tracking of this parameter. Results obtained from myoelectric signal are presented and discussed.