• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.35-42
• /
• 2008

The compressive residual stress due to shot peening process can increase the intrinsic fatigue strength of surface and therefore would be beneficial in reducing the probability of fatigue damage. However, it was not known that the effect of shot peening on corrosion environment. In this study, the influence of shot peening and corrosion condition on corrosion property was investigated on immersed in 3.5% NaCl, 10% $HNO_3$+3% HF, 6% $FeCl_3$. The immersion test was performed with two kind of specimens. The immersion test periods were carried out on performed 360days. Corrosion potential and weight loss were investigated from experimental results. From these results, the effect of shot peening on the corrosion characteristics was evaluated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.53-54
• /
• 2011

The facilities producing the nuclear energy chosen for resolving the recent global energy problem have been increasingly constructed, and hence more frequent durability tests on radiation shielding concrete are required due to NPP(Nuclear Power Plant) life extension and increase of radioactive waste repositories. Bulk dry density is one of the critical factors ensuring the durability and performance of the radiation shielding concrete because the design of the radiation shielding reinforced concrete structures for NPPs is based on the bulk dry density of the concrete. Bulk density of unconsolidated shielding concrete can be calculated utilizing a test assuring to satisfy the bulk dry density, or existing credible data set. This study evaluated correlation between bulk density and bulk dry density of the concrete used for Korean NPPs (y=1.0913X-0.2458) and developed a correlation expression considering standard deviation of bulk dry density (y=1.0913X-0.3358).

• 한국주조공학회지
• /
• 제31권3호
• /
• pp.145-151
• /
• 2011

Metallic foam has been known as a functional material which can be used for absorption properties of energy and sound. The unique characteristics of Al foam of mechanical, acoustic, thermal properties depend on density, cell size distribution and cell size, and these characteristics expected to apply industry field. Al-Zn-Mg-Cu alloy foams was fabricated by following process; firstly melting the Al alloy, thickening process of addition of Ca granule to increased of viscosity, foaming process of addition of titanium hydride powder to make the pores, holding in the furnace to form of cooling down to the room temperature. Metal foams with various porosity level were manufactured by change the foaming temperature. Compressive strength of the Al alloy foams was 2 times higher at 88% porosity and 1.2 times higher at 92% porosity than pure Al foams. It's sound and vibration absorption coefficient were higher than pure Al foams and with increasing porosity.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.247-256
• /
• 2016

In this paper, based on understanding the design theories on soil stabilization, a series of soil stabilizers were prepared with different kinds of industrial wastes such as calcined coal gangue (CCG), blast furnace slag (SS), steel slag (SL), carbide slag (CS), waste alkali liquor (JY), and phosphogypsum (PG). The results indicated that when the Portland cement (PC) proportion was lower than 20% in the stabilizer, for the soil sample selected from Wuhan (WT) and Beijing (BT), the unconfined compress strength (UCS) of the stabilized soil specimens could increase 4.8 times and 5.4 times respectively than that of the specimens stabilized only by PC; compared with the UCS of the specimen stabilized only by PC, the UCS of the specimen which was made from soil sample WT and stabilized by the stabilizer composed only by CCG, CS, and PG increased 1.5 times, and UCS of the specimen which was made from soil sample BT and stabilized by the stabilizer composed only by SS, JY, and PG increased 4.5 times.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권3호
• /
• pp.222-225
• /
• 2006

The treatment objective of mandibular fracture is a return to normal function. According to Champy, a rigid fixation of mandibular angle fracture is performed by using 4 or 6 holes titanium miniplates on the external oblique ridge of mandible. However, the limitations of metal plate such as hypersensitivity, interference with the cranio-facial growth of growing child, secondary bone resorption around the plate, foreign body reaction, declination of primary callus formation, and bone atrophy due to the lack of normal stress reaction of the bone have been reported. Recently, biodegradable miniplate has been introduced and used as an alternative to the metal plate despite its lower strength than that of the titanium plate and the side effect caused by the resorption in the body. In this study, 61 patients diagnosed as mandibular angle fracture and treated from Jan. 1998 to Dec. 2004 in our department have been reviewed. Metal plate fixation was used in 50 patients and biodegradable plate fixation in 11 patients on the external oblique ridge around the fractured mandibular angle according to the principle of monocortical osteosynthesis by Champy. We compared the incidence of side effects and the degree of bony union at the mandibular inferior border in two different fixation methods. In conclusion, we have found that one miniplate regardless of matter could provide enough strength to grasp bony fragments of the tension site and compress the inferior border of mandible without any complications.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.481-486
• /
• 1999

According to results of this research Fly-ash Cement permanent-form production was found to be possible by fly-ash mortal. The compress strength 350kg/$\textrm{cm}^2$, banding strength 120kg/$\textrm{cm}^2$ were possible material separting and bleeding by excessive W/C rate was decreased permanent-form made by polymer solved high price of polymer by fly-ash. Model material was made by result of first research. There were no minute-crack on beam form and out surface of form was very smooth, So filling degree seemed desirable length of form after steaming curing was maintained as expected. with these results production of form seemed possible. In the banding load test, fly-ash showed increase of maxim load 12% than RC. in the case of minute-crack, comparing with RC, fly-ash showed no crack at connect. at the first stage under continuing loading size of crack increased. These phenomena seemed to be based on contribution of stress of inner bars in permanent-form. in the test of defection, fly-ash shower about 10% beam load increase than RC. in the case of beam defection, RC showed sudden decrease of tolerance at maxim load and total breaking, but permanent-form showed breaking of bending maintaining defection with contribution of steel stress ($\Phi$6 wire-mash). There phenomenic seemed to be attributed to increase of surface and steel tolerance of form. According to construction explacemaion, it was guessed that each panel was constructed by conner-steels in form edge. so cohesiveness was small. on these bases. keeping width of horizontal band 30cm, form-panel of 20mm width was found to be of use. Permanent-form was found to be efficient in compressibleness, defection, safety and use of Fly-ash mortal.

• Clinics in Shoulder and Elbow
• /
• 제2권2호
• /
• pp.143-150
• /
• 1999

Purpose: The purpose of this study is to describe the characteristic clinical findings and treatment of suprascapular nerve entrapment by ganglion and to evaluate its results. Materials and Methods: Seven paitents with suprascapular nerve entrapment were evaluated on an average 13 months(range, six months to three years two months) after surgical excision and decompression. There were six males and one female. The mean age at operation was 31 years(range, 23 to 40 years), Suprascapular nerve entrapment were caused by compression of ganglion cyst in suprascapular notch or spinoglenoid notch in all cases. All patients complained of pain located over posterolateral area of the shoulder. Two patients had atrophy of both the supraspinatus and infraspinatus muscles, In four patients, only the infraspinatus muscle was involved. Muscle strength on both forward flexion and external rotation was decreased in two patients. In four patients, only external rotation was decreased. All patients underwent open excision of ganglion cyst and decompression. Results: The most dramatic effect of operation was prompt disappearance of pain in all patients. The average visual analog scale had improved from 7.2 to 0.6 point at the latest follow-up evaluation. An atrophy of the supraspinatus or infraspinatus muscle partially disappeared in four of six patients and muscle strength of forward flexion or abduction improved in all of six patients. The overall result was excellent for five patients and good for two. Conclusion: Surpascapular nerve entrapment by ganglionic cyst had clinically unique symptoms and signs on physical examination. Surgical excision is effective for symptomatic and functional outcomes. We believe that early intervention can be one of treatment modality before an irreversible damage occurs if the ganglion is large enough to compress suprascapular nerve, and to develop severe pain and muscular atrophy.

• 대한토목학회논문집
• /
• 제26권1C호
• /
• pp.25-31
• /
• 2006

대부분의 설계지침서에서는 암반에 근입된 현장타설말뚝의 주면저항력을 산출하기 위하여 암석의 일축압축강도를 사용한다. 그러나 최근에 도로교 설계기준 해설(대한토목학회, 2001)과 AASHTO 설계지침서(2000)에서는 현장조건을 보다 잘 반영할 수 있도록 RQD를 적용하여 산출한 암반의 일축압축강도를 사용하도록 개정되었다. 그런데 RQD를 이용하여 암반의 일축압축강도를 산정하는 식을 국내의 주요 기반암에 적용하는 데에 문제가 제기되었고, 여기에는 RQD 자체의 문제점, 즉 지하수, 절리면 상태 등을 반영하지 못한다는 점도 포함되었다. 결국 도로교 설계기준 해설(2001)은 암석의 일축압축강도를 이용하여 주면저항력을 산정하는 방법으로 다시 개정되었다(한국도로공사, 2002). 본 연구에서는 암석의 일축압축강도와 현장 암반의 일축압축강도를 연관시키는 수단으로 제시되어 있는 기존의 여러 방법을 비교 검토하였으며, 이 가운데 신뢰도가 있는 것으로 평가되고 있는 Hoek-Brown 파괴 규준을 이용하여 암반의 일축압축강도 추정식을 제시하였다. 또한 이를 이용하여 암반에 근입된 현장타설말뚝의 주면저항력 예측 방법을 제안하였다. 제안된 방법은 현장타설말뚝의 재하시험 데이터를 이용하여 기존의 여러 방법으로 구한 주면저항력과 비교한 결과 신뢰도가 있음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1369-1375
• /
• 2011

쇼트피닝 공정은 쇼트볼이 소재에 충돌을 일으킬 때 생기는 압축잔류응력에 의해 소재의 피로 강도를 향상 시키는데 그 목적이 있다. 본 연구는 변형률 속도 민감도 변화가 압축잔류응력에 미치는 영향을 분석하기 위해서 수행되었다. 본 연구자는 변형률 속도 민감도의 영향을 고려한 쇼트피닝 다중 충돌을 ABAQUS 6.9-1 를 사용하여 모사하였다. 사용된 소재는 AISI 4340 강종이다. 본 연구자는 변형률 속도 민감성이 높은 재료와 낮은 재료를 비교하였다. 결과적으로 변형률 속도 민감성이 증가하면 압축 잔류응력은 감소하였다. 또한 경도가 낮은 소재의 압축잔류응력이 경도가 높은 소재보다 더 크게 발생 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.348-351
• /
• 2006

Bipolar plate, which forms about 50% of the stack cost, is an important core part with polymer electrolyte membrane in PEMFC. Bipolar plates have been commonly fabricated from graphite meterial having high electrical conductivity and corrosion resistance. Lately, many researchers have concentrated their efforts on the development of metallic bipolar plate and stainless steel has been considered as a potential material for metallic bipolar plate because of its high strength, chemical stability, low gas permeability and applicability to mass production. However, it has been reported that its inadequate corrosion behavior under PEMFC environment lead to a deterioration of membrane by dissolved metal ions and an increase in contact resistance by the growth of passive film therefore, its corrosion resistance as well as contact resistance must be improved for bipolar plate application. In this work, several types of coating were applied to 316L and their electrical conductivity and corrosion resistance were evaluated In the simulated PEMFC environment. Application of coating gave rise to low interfacial contact resistances below $19m{\Omega}cm^2$ under the compress force of $150N/cm^2$. It also made the corrosion potential to shift in the posit ive direct ion by 0.3V or above and decreased the corrosion current from ca. $9{\mu}A/cm^2$ to ca. $0.5{\mu}A/cm^2$ in the mixed solution of $0.1N\;N_2SO_4$ and 2ppm HF A coat ing layer under potentiostatic control of 0.6V and $0.75V_{SCE}$ for 500 hours or longer showed some instabilities, however, no significant change in coat Ing layer were observed from Impedance data. In addition, the corrosion current maintained less than $1{\mu}A/cm^2$ for most of time for potentiostatic tests. It indicates that high electrical conductivity and corrosion resistance can be obtained by application of coatings in the present work.