• 대한전자공학회논문지
• /
• 제18권1호
• /
• pp.41-50
• /
• 1981

The human speech contains many redundancies. To economize communication channel or memory size for a computerized synthesis of human voices, it is necessary to compress the data before sending. We have treated human speech organ as an eighth order dynamic system which is time varying as the person speaks. Using an anaylyzer of our design, each eight parameters are obtained for the vowels [아], [어], [오], [우], [으], [이], [애], and (외) of korean language with considerable discrepancies between persons. Supplying those parameters to a synthesizer which we have made, we have sucoeeded in the simulation of human speech for the above mentioned vowels of Korean language and observed that they bear all the features of the original speakers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.247-254
• /
• 2003

The lightness of components required in automobile and machinery industry is requiring high strength of components. In particular manufacturing process and new materials development for solving the fatigue fracture problem attendant upon high strength of suspension of automobile are actively advanced. In this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in high temperatures($100^{\circ}$, $150^{\circ}$, $180^{\circ}$) was investigated with considering fracture mechanics. So, we can obtain followings. (1)Compressive residual stress decreases in high temperature, that is, with increasing temperature. (2)The effect of compressive residual stress on fatigue crack growth behavior in high temperature increases below ${\Delta}K=17{\sim}19MPa$ (3)It was investigated by SEM that the constraint of compress residual stress for plastic zone of fatigue crack tip was decreased in high temperature as compared with room temperature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1597-1600
• /
• 2003

Fine-Blanking is an advanced and precision stamping process, by which a component with precise geometry and smooth cut surface can be produced without any further major secondary operations. By applying the Fine-Blanking technology, the significant improvement of the component should be obvious. As the components are with good shape, smooth surface and precise size, they can be ready for assembly without any further secondary operations. The productivity is increased, the production cycle time and the component cost are significantly reduced. We apply the fine-Blanking for chain sprocket. And do Mecanical test for compress strenth. impaact, roughness, Brinell hardness, dimensional stability.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.94-100
• /
• 2001

Distortion is a potential problem with all welded fabrication and should be caused dimensional changes and mismatch of joints during welding fabrication. Correction unacceptable weld distortion is extremely costly and in some case impossible. The aim of the present work is to verify the variation of the compressive force, tensile force and distortion during plastic deformation under Tungsten-inert-gas(TIG) welding, on type 304 stainless steel. Experimental results show that possibili-ty if measuring deformation during welding and good correlation was found between analytical and experimental result ad finite element methods have been used to model temperature analysis.

• 소음진동
• /
• 제10권4호
• /
• pp.584-595
• /
• 2000

We design a new actuator for high density optical device in order to control the radial tilting motion. The newly designed actuator makes it possible to control the tilting motion actively, while the coventional actuator compress tilting motion with passive spring. First of all, We present 3-dimensional modeling of actuator and accomplish the modal analysis and magnetic analysis of actuator. Due to these results, a new designed actuator has performance of high sensitivity and high second resonance frequency. Secondly, We present the 3-DOF dynamic modeling of the 4-wire spring type actuator. sensitivity analysis is performed to consider the assembling error, such as the difference of mass center and force center. From these results, the sensitivities of rotation due to the assembly error are revealed and design criteria of rotation is presented. And experimental results of a newly designed actuator are presented and compared with theoretical results. Finally, We propose a dynamic tilt compensation and high acceleration actuator for high density optical storage devices.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권2호
• /
• pp.97-122
• /
• 2011

Fluid dynamics driven by pumping without valves (valveless pumping) shows interesting physics. Especially, the driving function to generate valveless pump mechanism is one of important factors. We consider a closed system of valveless pump which consists of flexible tube part and stiffer part. Fluid and structure (elastic tube) interaction motions are generated by the periodic compress-and-release actions on an asymmetric location of the elastic loop of tubing. In this work, we demonstrate how important the driving forcing function affects a net flow in the valveless circulatory system and investigate which parameter set of the system gives a more efficient net flow around the loop.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.853-858
• /
• 2000

According to the results of this research, Production of Fold Mortar Permanent - Form was found to be possible by Mortar. Th FP-Form (Fold Permanent-Form) mortar had compress strength 580kgf/$\textrm{cm}^2$. FP-Form model was made by the result of the first research. There was no minute-crack on beam form and the outer surface of form was very smooth, and those qualities it were made possible hand-mad by experiment. This study is about bond strength progress of FP-Form that developed for the form work rationalization and systematization. The result of this study follows; (1) Fluidity and strength development of mortar which used for FP-Form are satisfied (2) After study on getting good bond strength progress, inside-uneven type presents the better suitableness, and wire netting V-type presents the better shear strength.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.25-28
• /
• 2001

In this paper we implement moving picture transfer system using bluetooth Development Kit (DK). To reduce the size of the image data, we use M-JPEG compression. We use bluetooth Synchronous Connection-Oriented (SCO) link to transfer voice data. Server receive image data from camera and compress the image data in M-JPEG format, and then transmit the image data to client using bluetooth Asynchronous connection-less (ACL) link. Client receive image data from bluetooth ACL link and decode the compressed image and then display the image to screen. Sever and Client can transmit and receive voice data simultaneously using bluetooth SCO link. In this paper bluetooth HCI commands and events generated by host controller to return the results of HCI commands are explained and the flow of bluetooth connection procedure is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2319-2322
• /
• 2003

We propose ROI(region of interest) image coding application to still image using PSBS(partial significant bitplane shift)method combined with human face region detecting system. PSBS is an encoding algorithm for ROI image coding in JPEG2000, and takes advantages of both generic scaling based method and maximum shift method defined in JPEG2000. The Powerful advantages of PSBS are able to adjusting image quality in ROI and background flexibly, and support arbitrarily shaped ROI coding without coding the shape. In this letter, we show how to compress an image for human face region using PSBS method combined with human face region detecting system, and propose its application.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1787-1790
• /
• 2003

In this paper. we proposed a hardware(H/W) structure which can compress the video and embed the watermark in real time operation and implemented it into a FPGA platform using VHDL(VHSIC Hardware Description Language). All the image processing element to process both compression and reconstruction in a FPGA were considered each of them was mapped into H/W with the efficient structure for FPGA. The global operations of the designed H/W consists of the image compression with the watermarking and the reconstruction, and the watermarking operation is concurrently operated with the image compression. The implemented H/W used the 59％(12943) LAB(Logic Array Block) and 9％(28352) ESB(Embedded System Block) in the APEX20KC EP20K600CB652-7 FPGA chip of ALTERA, and stably operated in the 70㎒ clock frequency over. So we verified the real time operation, 60 fields/sec(30 frames/sec).