• Elastomers and Composites
• /
• 제20권2호
• /
• pp.115-131
• /
• 1985

Heavy residual fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as heavy fuel oil for large combustion engines, boilers, etc$\cdots$. But this study was made to investigate heavy residual fuel oils for using as industrial raw material and resulted the following possiblities as valuable raw material as well as heavy fuel oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of blown asphalts, cut back asphalts, emulsified asphalts and asphalt compound, rubber/asphalt sheet, etc$\cdots$. 3) Using waxy oil side streams for manufacturing of raw oil to be lube oil base stocks through solvent dewaxing. 4) Production of lube base oils and rubber process oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• 한국광학회지
• /
• 제20권4호
• /
• pp.230-235
• /
• 2009

광고분자 필름은 홀로그램을 저장하기 위한 기술로서, 광굴절 결정보다 고감도, 간단한 실시간 처리, 저렴한 가격 등의 장점으로 홀로그래픽 저장기술 응용에 보다 손쉽게 적용할 수 있다. 본 연구에서는 기존의 PVA/AA계 광고분자 필름에 광학적 활성을 가지는 $SeO_2$를 첨가한 광고분자 필름을 제조하였다. 홀로그램을 저장하기 위한 기록매질로서 최적의 회절효율을 가지는 광고분자 필름을 만들기 위하여, 광감각제인 Eosin Y의 농도와 광고분자 필름의 두께를 달리하여 실험하였다. 광고분자 필름의 회절효율은 532 nm 레이저로, $40^{\circ}$의 입사각에서 측정하였다. 실험 결과, Eosin Y의 농도가 0.0045 g이고, 필름 두께가 $297{\mu}m$일 때, 78.70%로 가장 높은 회절효율 값을 나타내었다.

• 공업화학
• /
• 제22권4호
• /
• pp.395-399
• /
• 2011

리튬 이온 전지에 사용되는 개스킷 재료는 내전해액성, 전기 절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 개스킷 고무에 적용되는 가교조제의 영향을 살펴보기 위하여 리튬 이온 전지에 있어 대표적 용매인 propylene carbonate에서 용해도 지수의 차가 큰 ethylene propylene diene monomer (EPDM)에 금속산화물인 가교조제의 함량을 조정하여 compound를 배합하였다. 이렇게 배합된 compound를 리튬 이온 전지의 작동환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 다양한 가교조제를 사용하여 가교조제에 따른 고무재료의 물리적 화학적 특성 및 리튬 이온 전지에의 영향에 대하여 검토하였다. 가교조제로 ZnO를 사용한 고무에서 1000 h까지의 공기 노화 시험 및 전해액의 대표 유기용매인 propylene carbonate 침적시험에 대해 안정적인 물성을 얻을 수 있었으나, 이온 용출성 평가에서는 $Zn^{2+}$가 용출되기 때문에 리튬 이온 전지용 개스킷에 적용되는 고무 배합에서는 ZnO 사용을 제한하여야 한다.

• Smart Structures and Systems
• /
• 제21권4호
• /
• pp.421-433
• /
• 2018

Carbon fiber reinforced polymer (CFRP) cable has good mechanical properties and corrosion resistance. However, the anchorage of CFRP cable is a big issue due to the anisotropic property of CFRP material. In this article, a high-efficient bonding anchorage with novel configuration is developed for CFRP cables. The acoustic emission (AE) technique is employed to evaluate the performance of anchorage in the fatigue test and post-fatigue ultimate bearing capacity test. The obtained AE signals are analyzed by using a combination of unsupervised K-means clustering and supervised K-nearest neighbor classification (K-NN) for quantifying the performance of the anchorage and damage evolutions. An AE feature vector (including both frequency and energy characteristics of AE signal) for clustering analysis is proposed and the under-sampling approaches are employed to regress the influence of the imbalanced classes distribution in AE dataset for improving clustering quality. The results indicate that four classes exist in AE dataset, which correspond to the shear deformation of potting compound, matrix cracking, fiber-matrix debonding and fiber fracture in CFRP bars. The AE intensity released by the deformation of potting compound is very slight during the whole loading process and no obvious premature damage observed in CFRP bars aroused by anchorage effect at relative low stress level, indicating the anchorage configuration in this study is reliable.

• Macromolecular Research
• /
• 제8권1호
• /
• pp.19-25
• /
• 2000

Aromatic diamine monomers containing allylic ester linkage, 1,5-bis(4-aminobenzoate)-1,2,3,4-tetrahydronaphthalene (4-DABTN) and 1,5-bis(3-amin obenzoate)-1,2,3,4-tetrahydronaphthalene (3-DABTN) were synthesized through the reaction of 1,5-dihydroxy-1,2,3,4-tetrahydronaphthalene and 4- or 3-nitrobenzoly chloride. By the reaction of these diamines with pyromellitic dianhydride (PMDA) or 4,4-(hexafluoroisopropylidene)diphthalic anhydride (6FDA), poly(amic acid)s were obtained. The inherent viscosities of the poly(amic acid)s were between 0.55 and 1.31 dL/g. The poly(amic acid)s were converted to polyimides by chemical imidization. The thermogravimetric analysis (TGA) thermograms of these polyimides showed temperatures of 5% weight loss between 323 and 389$^{\circ}C$ in nitrogen atmosphere. The model compound ,1,5-bis (4-nitrobenzoate)-1,2,3,4-tetrahydronaphthalene (4-DNBTN), was decomposed to 4-nitrobenzoic acid and 5-(4-nitrobenzoate)-3,4-dihydronaphthalene upon addition of CF$_3$COOH.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• 전기화학회지
• /
• 제13권4호
• /
• pp.246-250
• /
• 2010

In this study, nano-crystallized $Al_2O_3$ was coated on the surface of $LiFePO_4$ powders via a novel dry coating method. The influence of coated $LiFePO_4$ upon electrochemical behavior was discussed. Surface morphology characterization was achieved by transmission electron microscopy (TEM), clearly showing nano-crystallized $Al_2O_3$ on $LiFePO_4$ surfaces. Furthermore, it revealed that the $Al_2O_3$-coated $LiFePO_4$ cathode exhibited a distinct surface morphology. It was also found that the $Al_2O_3$ coating reduces capacity fading especially at high charge/discharge rates. Results from the cyclic voltammogram measurements (2.5-4.2 V) showed a significant decrease in both interfacial resistance and cathode polarization. This behavior implies that $Al_2O_3$ can prevent structural change of $LiFePO_4$ or reaction with the electrolyte on cycling. In addition, the $Al_2O_3$ coated $LiFePO_4$ compound showed highly improved area-specific impedance (ASI), an important measure of battery performance. From the correlation between these characteristics of bare and coated $LiFePO_4$, the role of $Al_2O_3$ coating played on the electrochemical performance of $LiFePO_4$ was probed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.991-996
• /
• 2004

Plastics are widely used in industry, because they are light, easily manufactured, and have high specific strength. And many researches to increase the strengths and to reduce the price are being conducted at now. One of these researches is concerning to additives. Foaming techniques are used to endow insulation properties, to improve specific strength, or reduce the material cost. Due to their unique properties, foamed plastics are applied to refrigerator, pipe, and insulators. Micro-cellular foaming is the latest foaming technique that was invented at 1980 in MIT. It is known that many tiny small cells are generated in the polymer matrices and micro-cellular foamed plastics show relatively high specific strength. We investigated the role of CaCO3 which is one of the most widely used additives in plastics industry as an additive for nucleation in view of cell morphology. CaCO3 used in this paper was treated to increase the dispersibility and to lower the density, so it has many pores at his body. Two experiments were conducted, in order to check the role of an additive for nucleation. One is compound-ability and the other one is role of nucleation agents.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.54-64
• /
• 2012

본 연구에서는 polar 한 silica 와 non-polar 한 고무사이의 친화력을 증대시키기 위하여 SBR 분자 주쇄에 acrylonitrile 을 도입시킨 acrylonitirle functionalized emulsion SBR 의 물성에 관하여 연구하였다. Acrylonitrile의 nitrile group 은 silica 표면의 silanol group 과 H-bond 를 형성할 수 있음으로 polar 한 silica 표면에 흡착되는 가교촉진제를 줄이고 가황반응을 촉진시키는 것으로 판단된다. SBR 및 AN-SBR 에 PEG 를 적용한 컴파운드의 경우 PEG 와 silica 표면의 silanol group 과의 상용성이 높아 가교촉진제가 polar 한 silica 표면에 흡착됨을 줄여 가교시간이 단축된 것으로 판단된다. 기계적 물성에서 AN-SBR 컴파운드는 SBR 1721 컴파운드 대비 100%, 300%에서 높은 모듈러스 값을 나타내었다. 이러한 결과는 AN-SBR 의 높은 분자량 및 nitrile group 의 도입에 따른 가교도의 상승에 의한 결과로 판단된다. 동적점탄특성 결과에서 AN-SBR 컴파운드는 SBR 1721 컴파운드 대비 $60^{\circ}C$ 에서 낮은 tan ${\delta}$ 값을 나타내었으며, 이는 nitrile group 과 silica 사이의 친화력에 따른 filler-rubber interaction의 향상에 의해 반복변형에 의한 energy dissipation 이 낮은 것으로 판단된다.

• 접착 및 계면
• /
• 제21권3호
• /
• pp.101-106
• /
• 2020

본 연구에서는 에폭시 수지를 개질 한 변성 아크릴레이트를 합성하였으며, 이를 기존의 유리 섬유 복합소재에 사용하는 SMC 조성물에 5 phr - 15 phr을 첨가하여 SMC 소재를 제조하였다. SMC 프리프레그를 고온고압 (150 ℃, 10 bar)에서 컴프레션 몰딩방법으로 성형하여 유리섬유 복합소재를 제조하였으며, 제조된 복합소재를 가공하여 인장강도, 충격강도 등의 기계적 물성을 연구하였다. 실험 결과 합성된 변성 아크릴레이트를 5 phr을 포함하는 복합소재가 합성 아크릴레이트를 포함하지 않는 binder 샘플보다 인장강도는 약 20%, 충격강도는 약 12% 향상함을 보였으며, 이는 합성 아크릴레이트가 폴리에스터와 반응할 수 있는 4개의 아크릴 기를 가짐으로써 가교반응을 강하게 하면서 기계적 강도가 향상됨을 확인하였다.