• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.224-234
• /
• 2016

This study developed the conductivity pattern of solid surface using laser direct pattern and compound polymer material technology. For development direct patterning system of solid surface, we used the laser power stabilizer, the dynamic focusing, 3D scanner S/W and the auto aligning techniques. Also For conductivity pattern, we are developed compound polymer material with additive by electro-less plating. These technologies are already used commercially. However operation and control integrated system for direct patterning of solid surface are not yet developed. The objective of this paper is to introduce the laser direct structuring for simple process improvement instead complex PCB process, and develop the operating stability and integration system. Also we implemented new application of laser direct structuring through sample manufacture.

• Elastomers and Composites
• /
• v.56 no.2
• /
• pp.72-78
• /
• 2021

A phase-change material (PCM) is a material that has the ability to delay heat transfer by absorbing heat from its environment or releasing heat to its environment while its phase changes from solid to liquid or liquid to solid at a specific temperature. As it is applied, it can contribute to environmental conservation such as energy savings and carbon dioxide emission reduction. In order for a PCM to store and release heat, the volume change during its phase transition should be large, and thus a phase transition space is required. When a PCM is used as a polymer additive, it is confined within the polymer, and there is no phase transition space; thus, its ability to absorb and release heat is significantly reduced. Therefore, in this study, porous silica was used to provide EVA/PCM compounds with sufficient space for their phase transition, and to improve the compatibility between the EVA and PCM, modified silica is used: surface-modified 5 wt% silica with 3-methacryloxypropyltrimethoxysilane. The compound was prepared and compared with the silica compound. The presence or absence of the modified silica surface modification was confirmed using Fourier-transform infrared spectroscopy and thermogravimetric analysis, the heat capacity of the compound was evaluated based on a differential scanning calorimetry analysis, and its mechanical strength and morphology were determined using scanning electron microscopy.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.620-625
• /
• 2008

A novel nitrogen-phosphorus compound, diphenyl piperazine-1,4-diylbis(methylphosphinate)(DPPMP) was synthesized via a two step reaction and its flame retarding efficiency as a single component additive was investigated. The success of synthesis was confirmed by FTIR and $^1H$ and $^{31}P$ NMR analysis. The product was mixed with polycarbonate (PC), poly(butylene terephtalate) (PBT), ethylene-vinyl-acetate copolymer (EVA), and acrylonitrile-butadiene-styrene copolymer (ABS). The flame-retarding efficiency was evaluated using the limiting oxygen index (LOI) and the UL-94 vertical test methods. The addition of DPPMP enhanced the flame retardancy of the polymers and the V-0 ratings were obtained for the polymers examined in this study at a loading of 7-30 wt%. The gas-phase flame retardancy mode of action was suggested for this material from the thermogrametry experiment results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.223-223
• /
• 2007

Thermal and mechanical properties were investigated in several semi-conductive materials which is composed of carbon black and polymer. EVA, EEA, and EBA is normally used for matrix polymer and normally acetylene black and furnace black is used. Isothermal thermo gravimetric analysis is done as a function of atmosphere and temperature. In nitrogen atmosphere semicon compound was slowly degradaded but in ambient condition degradaded fast. So in the cable manufacturing, atmosphere and materials are very important.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.277-282
• /
• 2014

Two tert-butyl substituted phthalocyanines(Pcs), in metal-free and metallated forms, were synthesized and the fluorescence responses toward various nitro derivatives, including picric acid(PA), 2,4-dinitrotoluene(DNT), 1,4-dinitrobenzene(DNB), 4-nitrotoluene(NT), nitrobenzene(NB), 1,4-benzoquinone(BQ), and nitromethane(NM) were investigated. Among the various nitro derivatives, current Pc derivatives exhibited efficient and exclusive fluorescence quenching in the presence of picric acid, which was readily observed by a naked eye. Quenching efficiency was estimated by the Stern-Volmer relationship, in which quenching constant, KSV, was calculated to be in the range of $10^4M^{-1}$. It was also found out that the aggregational behaviors of these Pcs are heavily dependent on the nature of solvent systems, subsequently affecting the quenching efficiency.

• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.71-78
• /
• 2007

A [TEACOOH]-Montmorillonite intercalations complex obtained from Na-Montmorillonite and 10-Carboxy-n-triethylammonium bromide was used to attempt the polymerization of ${\varepsilon}$-caprolactone between the layer spaces of the intercalations complex to achieve Montmorillonite-Polycaprolactone nanocomposites in which the inorganic material (montmorillonite) is chemically combined with the organic polymer (polycaprolactone). The results of X-ray-, IR-, and TEM-analyses for samples obtained after polymerization showed that a polycondensation reaction was successfully produced. For a more precise investigation of the polymeric reaction products the polymerized products were separated from the silicate layers and analyzed with an IR-spectrometer. A comparison of the results of the IR-analyses of the separated polymer with that of the polymer synthesized by the reaction of ${\varepsilon}$-caprolactone with only the organic cation and without montmorillonite showed that the two obtained polymers are the same compound.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.112-115
• /
• 2000

In this work the results of the systematic investigations on the effect of organic addition by using polymer compound as starting materials on the superconducting properties of YBCO electrophoretic deposited films on silver substrate are presented. The characteristics of the films were examined by X-ray diffraction and SEM observation. Our results show that the adhesion and microstructure of these films are sensitive to the nature of polymer compounds and sintering conditions (electrophoretic deposition, drying and heat-treatment procedures). To develop optimum microstructures for samples processed in this manner it is necessary to have an understanding of how these processes affect the microstructure and hence the properties of ceramic superconductors.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.400-404
• /
• 2020

In this paper, we study the correlation between the crystallinity of semiconductive compounds for eco-friendly power cables and the dispersive properties of carbon black. The crystal structure of the polymer material is advantageous for mechanical properties and heat-resistance. However, the polymer acts as an inhibitor to the dispersibility of carbon black. The purpose of this study is to develop a TPE semiconductive compound technology. The high heat resistance and ultra-smoothness characteristics which are required for high voltage and ultra-high voltage cables should be satisfied by designing and optimizing the structure of a non-crosslinking-type eco-friendly TPE semiconductive compound. The application of excess TPE resin was found to not only inhibit the processability in the compounding process, but also reduced the dispersion properties of carbon black due to higher crystallinity. After the crystallinity of the compound was identified through DSC analysis, it was compared with the related dispersion characteristics. Through this analysis and comparison, we designed the optimal structure of the eco-friendly TPE semiconductive compound.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.564-566
• /
• 2007

Synthesis of two photoactive compounds containing core imide moiety was carried out for an application to interdielectric layer in TFTLCD array. An aqueous alkaline developable polymer matrix was synthesized by free radical copolymerization. A positive photoresist formulation was developed utilizing synthesized UV monomers, photoactive compound, binder polymer, sulfactant and alkali developable polymer matrix. It was found that via-holes with good resolution, high transmittance and thermal resistance could be obtained by photolithographic process utilizing the new positive interdielectric material with high thermal stability.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.509-515
• /
• 2021

In this study, a pressure vessel for a heat pipe was fabricated by bonding a metal thin film using a polymer compound sheet. In order to confirm the applicability of the experimentally manufactured copper material thin heat pipe of 0.6 mm or less, the pressure resistance and effective thermal conductivity for pressure generated according to the type of the working fluid of the heat pipe were evaluated to suggest the commercialization potential of the thin heat pipe. As a result of evaluating the pressure resistance and effective thermal conductivity performance of the thin heat pipe, the following conclusions were drawn. 1) Using a PEEK-based polymer compound sheet, it was possible to fabricate a pressure vessel for a thin heat pipe with a pressure resistance of up to 1.0 MPa by bonding a copper thin film, and the possibility of commercialization was confirmed at a temperature below 120 ℃. 2) In the case of the effective thermal conductivity performance evaluation test, the effective thermal conductivity of ethanol was higher than that of FC72 and Novec7000, and in the case of ethanol, the maximum effective thermal conductivity was 2,851 W/mK at 3.0 W of heating.