• Natural Product Sciences
• /
• 제20권2호
• /
• pp.80-85
• /
• 2014

In the course of screening for antioxidant compounds from natural plants in Korea by measuring the radical scavenging effect, a methanol extract of the flower buds of Daphne genkwa S. et Z. (Thymelaeaceae) was found to show a potent antioxidant activity. Subsequent activity-guided fractionation of methanol extract of D. genkwa led to the isolation of four compounds from the ethyl acetate soluble fraction. The chemical structures were elucidated as genkwanin (1), 3'-hydroxygenkwanin (2), apigenin (3), and tiliroside (4) by spectroscopic techniques. Among them, compound 2 showed the significant anti-oxidative effect on DPPH. And compound 2 showed the significant riboflavin-and xanthine-originated superoxide quenching activities. To verify the antioxidant enzymatic activities of compound 2, the SOD enzymatic activity was measured spectrophtometrically using prepared Caenorhabditis elegans homogenates. The results showed that compound 2 was able to elevate SOD activity of C. elegans in a dose dependent manner. Moreover, compound 2 decreased the intracellular ROS accumulation of worms.

• 열처리공학회지
• /
• 제15권5호
• /
• pp.219-227
• /
• 2002

This study has been performed to investigate the effect of $CO_2$ content on the growth characteristics of the compound layer, porous layer and corrosion characteristics of carbon steels after gaseous nitrocarburizing in $70%-NH_3-CO_2-N_2$ at $580^{\circ}C$ for 2.5 hrs. The results obtained from the experiment were the thickness of the compound and porous layers increased with increasing $CO_2$ contents. At the same fixed gas composition the thickness of the compound and porous layer increased with increasing carbon content of the specimens. X-ray diffraction analysis showed that compound layer was mainly consisted of ${\varepsilon}-Fe_{2-3}(N,C)$ and ${\gamma}^{\prime}-Fe_4N$ as the increased with $CO_2$ contents in atmosphere, compound layer was chiefly consisted of ${\varepsilon}-Fe_{2-3}(N,C)$ phase. With increasing $CO_2$ content and total flow rate in gaseous nitrocarburizing, the amount of ${\varepsilon}-Fe_{2-3}(N,C)$ phase in the compound layer was increased. The current density of passivity decreased with increasing $CO_2$ content due to the development of porous layer at the out most surface of ${\varepsilon}-Fe_{2-3}(N,C)$.

• 동의생리병리학회지
• /
• 제20권5호
• /
• pp.1282-1284
• /
• 2006

In the course of search for hepatoprotective agents from oriental traditional medicines, one compound was isolated from the MeOH extract of the fruits of Schizandra chinensis, and its structure was determined as gomisin J(1). The evaluation for hepatoprotective activity of isolated compound 1 on drug-induced cytotoxicity was conducted, and compound 1 showed protective effect with an EC$_{50}$value of 86.0 ${\pm}$ 5.3 ${\mu}$M against tacrine-induced cytotoxicity in Hep G2 cells. One of the well-known hepatoprotective agents, silybin, used as a positive control, and the hepatoprotective effect of compound 1 is similar with that of silybin (EC$_{50}$ value = 90.5 ${\pm}$ 9.8 ${\mu}$M).

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.42-52
• /
• 1997

This paper deals with wear characteristics of ion-nitrided metal theoretically and experimentally in order to analysis of wear phenomena. Wear tests show that compound layer of ion-nitrided metal reduces wear rate when the applied wear load is mall. However, as th load becomes large, the existence of compound layer tends to increase wear rate. The residual stress at the surface of ion-nitrided metal is measured, and the internal stress distribution is calculated when the normal and tangential forces are applied to the surface of metal. Compressive residual stress is largeest at the compound layer, and decreases as the depth from the surface increases. Calculation shows that the maximum stress exists at a certain depth from the surface when normal and tangential force are applied, and that the larger the wear load is the deeper the location of maximum stress becomes. In the analysis, it is found that under small applied wear load the critical depth, where voids and cracks may be created and propagated, is located at the compound layer, as the adhesive wear, where hardness is an important factor, is created the existence of compound layer reduces the amount of wear. When the load becomes large the critical depth is located below the compound layer, and delamination, which may be explained by surface deformation, crack nucleation and propagation, is created, and the existence of compound layer increases wear rate.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.8-12
• /
• 1988

This study has been carried out to evaluate gaseous nitrocarburizing treatment undertaken for pure iron at $570^{\circ}C$ in an atmosphere containing 50% endothermic gas, generated from natural gas, and 50% ammonia. The results obtained from the experiment are as follows ; 1) The microstructure of gaseous nitrocarburized pure iron consists of the compound layer on the surface and the diffusion zone beneath it. The compound layer progresses uniformly into ferrite with a thickness of $20{\mu}$ obtained after treating for 3 hours. 2) Chemical analysis has shown that the compound layer has a C/N ratio of 0.19 and that the average combined interstitial content of the compound layer is about 30 atomic percent, which is close to the lower limit of the ${\varepsilon}$-carbonitride phase field in Fe-C-N phase diagram. 3) X-ray diffraction analysis has revealed that the compound layer consists mainly of the c.p.h. phase, ${\varepsilon}-Fe_3$(C.N) and a small amount of $Fe_4N$ and traces of ferrite are also present in the compound layer. 4) The microhardness of the compound layer is about 600 V.H.N and shows a relatively sharp fall-off at the compound layer/diffusion zome interface. 5) The average actual degree of ammonia dissociation is calculated to be 27% for a gaseous nitrocarburizing treatment carried out at $570^{\circ}C$.

• 열처리공학회지
• /
• 제7권3호
• /
• pp.206-218
• /
• 1994

In 50%$NH_3+Air+N_2$ atmospheres, the effect of air additions on the growth characteristics of the compound layer during oxynitriding at $570^{\circ}C$ for 2hr in carbon and alloy steels has been investigated. The ammount of apparent residual ammonia during oxynitriding has shown to be increased with air additions(9~36 Vol. %) and X-ray diffraction analysis of case oxynitreded has shown that the compound layer consist of ${\varepsilon}-Fe_{2-3}$(N, C) phase and ${\gamma}^{\prime}-Fe_4$(N,C) phase. In the case of carbon steels, the thickness of oxide layer, compound layer and porous layer and the amount of ${\varepsilon}-Fe_{2-3}$(N,C) phase in the compound layer were increased with additions of air in 50%$NH_3+N_2$ atmospheres. At the same gas composition, the thickenss of oxide layer, compound layer and porous layer in alloy steels showed slightly thin layer thickness compared to those of carbon steels and the ${\gamma}^{\prime}-Fe_4$(N,C) phase in the compound layer of alloy steels was found barely. Therefore, the most obvious effect of air addition in the gas nitriding atmosphere has been found to in crease further kinetics of nitriding reaction.

• 동의생리병리학회지
• /
• 제21권1호
• /
• pp.231-234
• /
• 2007

Dichlororinated bibenzyl compound (4) has been isolated from the New Zealand liverwort. This compound was elucidated using 1D/2D-NMR and mass spectral method. The compound (3) inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (2 mm inhibition zone and 2 mm inhibition zone at 30 ${\mu}$g/disc), Candida albicans ATCC 14053, (2 mm inhibition zone and 2 mm inhibition zone at 30 ${\mu}$g/disc), and the dermatophytic fungi Trichophyton mentagrophytes ATCC 28185, (12 mm inhibition zone at 30 ${\mu}$g/disc) and Cladosporium resinae ATCC 52833 (2 mm inhibition zone at 30 ${\mu}$g/disc). This bibenzyl compound (4) exhibited antimicrobial activity.

• 대한화학회지
• /
• 제22권6호
• /
• pp.403-411
• /
• 1978

Collagen의 model compound인 poly(Gly-Pro-Pro)의 수화에 관해서 empirical ppotential energy 함수를 사용하여 이론적으로 연구하였다. 물 분자와 model compound 간의 상호작용 energy를 최소화시켜서 물 분자들의 위치와 결합 energies를 계산하였다. 다음에는 일차수화층에 물이 붙음으로써 생기는 안정화 energy를 계산하고, 전체 안정화에 기여하는 여러 energy components의 기여도에 대해 논의하였다.

• 생약학회지
• /
• 제29권3호
• /
• pp.248-253
• /
• 1998

Antiallergic activity of the aqueous extract of Menthae herba (MHAE) was investigated in mice and rats. MHAE inhibited systemic anaphylaxis induced by compound 48/80 in mice. Especially, MHAE inhibited compound 48/80 induced systemic anaphylaxis 100% with a dose of 500 mg/kg body weight. MHAE significantly inhibited serum histamine levels induced by compound 48/80. MHAE inhibited histamine release from the rat peritoneal mast cells activated by compound 48/80 or anti-DNP IgE. Our studies provide evidence that MHAE will be beneficial in the treatment of anaphylaxis.

• 열처리공학회지
• /
• 제5권1호
• /
• pp.23-31
• /
• 1992

It is investigated that Fe-C-N compound layer, defusion layer, and induction hardened layer produced by nitrocarburizing blend heat treatment in austenitic temperature with high frequency induction heating of mild steel specimen sprayed sursulf salt-bath. As the temperature of blend-heat treatment got increased, the thickness and hardness of compound layer and diffusion layer were increased. Compound layer(max. $35{\mu}m$), diffusion layer (max. 2.5mm) and induction hardened layer were gained in the shortest time 10 sec and in the case of $1000^{\circ}C$ total hardness depth of those was about 3.5mm. When the blend-heat treated specimen was reheated, maximum hardness of compound layer was dropped more than that of the reheated compound layer after sursulf treated, whereas hardness of diffusion layer was increased.