• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• Korean Institute of Interior Design Journal
• /
• v.18 no.4
• /
• pp.43-50
• /
• 2009

Design trend, transparency, which has been developed under a reflection of current periodic environment, has been exposed to people all over the world through varieties of architecture facade and interior space. As interior space follows this trend, which has difference in showing space from the past, transparency becomes an important measure of showing openness of certain space. Main objective of this research is to understand a characteristics of materials that leads transparency a important measure to the modern interior design, and this will set the range to this applicable materials for appropriate areas of defining transparency in an interior. Characteristic uses of transparent materials found in this research which leads transparency into interior space are described below: First, there are two perspectives in transparency. One is visibility and material wised transparency and the other is conditional and spacial wised transparency. With this knowledge, we can expand a level of transparency with ideas such as clarity, opacity, visible transmission, and reflection, and this broadened range will vary the acceptable materials used to show transparency. Second, transparent materials are used with many different purposes in modern interior space as furnitures, sanitary fixtures, partitions, and other structures. With using modern technology in reforming this materials brought new methods in structure composing. last, transparent materials' expnt pable characteristics made modern interior space to have a control over spacial homogeneity, a simplified octlines, weakened boundaries, and compositional effects by interference and vision.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.969-974
• /
• 1991

The influences of A(Cu1/3Nb2/3)O3(A=Pb, Ba and Sr) on the ferroelectric-paraelectric phase transition of BaTiO3 ceramics has been investigated. The tetragonality of crystal structure decreased with increasing A(Cu1/3Nb2/3)O3 content at room temperature. A linear correlation between Curie point and the tetragonality of lattice was not observed. In all three systems the variation of Curie point with the mole fraction showed similar tendency that the Curie point decreased at lower mole fraction but gradually increased in the region of higher mole fractions, Diffuse phase transitions were observed at higher mole fractions. The variation of Curie points could be explained by internal stress and Jahn-Teller distortion of BO6 due to Cu2+, and it was thought that the diffuse character of phase transition was caused by compositional fluctuation.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.149-152
• /
• 2009

Hydrotalcites are anionic clays that are quite prevalent in nature and their importance is growing more and more because of their very wide range of potential applications and uses. Understanding the structural and compositional changes that occur on the molecular scale during the thermal decomposition of hydrotalcite compounds is essential for the basic prediction and comprehensive understanding of the behavior and technical application of these materials. In this study, several hydrotalcite compounds calcined at different temperatures for applications in a chlorine resistant textile were prepared and 27-Aluminm solid-state nuclear magnetic resonance (NMR) spectroscopy was used as a tool to study their local structure and behavior. The changes in the Al coordination of the hydrotalcite compounds were investigated with one dimensional (1D) solid-state magic angle spinning (MAS) NMR spectroscopy. The two broad resonances arising from the structurally different Al coordinations of these compounds were clearly resolved by two dimensional (2D) triple quantum magic angle spinning (3QMAS) NMR spectroscopy.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.334-341
• /
• 2019

Organometal halide perovskite materials have attracted much attention in the photovoltaic and light emitting devices due to the compositional flexibility with AMX₃ formula (A is an organic amine cation; M is a metal ion; X is a halogen atom). The addition of homovalent or heterovalent metal cations to the bulk organohalide perovskites has been performed to modify their energy band structure and the relevant optoelectronic properties by ligand-assisted ball milling. Here, we report CH₃NH₃Pb_1-xM_xBr₃ nanocrystals substituted by metallic cations (M is Sn²⁺, In³⁺, Bi³⁺; x = 0, 0.01, 0.02, 0.05, 0.1, 0.2). Photoluminescence and quantum yield was significantly reduced with increasing metallic cations content. These quenching effect could be resulted from the metal cations that behave as a non-radiative recombination center.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.384-390
• /
• 2021

In this paper, durability evaluation and surface damage mechanism were investigated through solid particle erosion (SPE) test after applying hot-dip aluminizing (HDA) technology for the purpose of maintenance of marine economizer tube. Damaged surface shape was analyzed using SEM and 3D microscope. Compositional changes and microstructure of the HDA layer were analyzed through EDS and XRD. Durability was evaluated by analyzing weight loss and surface damage depth after SPE. HDA was confirmed to have a two-layer structure of Al and Al₅Fe₂. HDA+HT was made into a single alloy layer of Al₅Fe₂ by diffusion treatment. In the microstructure of HDA+HT, void and crack defect were induced during the crystal phase transformation process. The SPE damage mechanism depends on material properties. Plastic deformation occurred in the substrate and HDA due to ductility, whereas weight loss due to brittleness occurred significantly in HDA+HT. As a result, the substrate and HDA showed better SPE resistance than HDA+HT.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.270-276
• /
• 2010

Nickel-copper foam electrodes with pore gradient micro framework and nano-ramified wall have been prepared by using an electrochemical deposition process. Growth habit of nickel-copper co-deposits was quite different from that of pure nickel deposit. In particular, the ramified structure of the individual particles was getting clear with chloride ion content in the electrolyte. The ratio of nickel to copper in the deposits decreased with the distance away from the substrate and the more chloride ions in the electrolyte led to the more nickel content throughout the deposits. Compositional analysis for the cross section of a ramified branch, together with tactical selective copper etching, proved that the copper content increased with approaching central region of the cross section. Such a composition gradient actually disappeared after heat treatment. It is anticipated that the pore gradient nickel-copper nanostructured foams presented in this work might be a promising option for the high-performance electrode in functional electrochemical devices.

• Journal of Ecology and Environment
• /
• v.39 no.1
• /
• pp.1-10
• /
• 2016

Despite it has been mentioned that the successful restoration in landscape level was achieved in the Young-il soil erosion control project, quantitative evaluation of restored plant communities (Alnus firma as introduced species and Pinus thunbergii as native species) was hardly founded. Light availability, litter and woody debris cover, and forest structure and composition were determined for 500 m² band-quadrat in three forest types. Abiotic factors of Q. serrata stands, as reference forest, and A. firma stands were similar but not for P. thunbergii stands. There were no significant difference on mean stem density (stems ha^-1, H = 3.6, p = 0.162), and the mean basal area of each stand had marginal significance (m² ha^-1, H = 5.7, p = 0.058) among stands as total basal area was higher with the order of A. firma (21.4 m² ha^-1), P. thunbergii (19.8 m² ha^-1) and Q. serrata (16.2 m² ha^-1). Restoration of vegetation structure was more effective in fast-growing and N-fixing A. firma, as introduced species plantation. However, result of MRPP, NMS ordination and ISPAN for herbaceous layer, not for tree and shrub species composition, indicated that restoration of ground vegetation was likely influenced highly from local environment. Propagule availability from landscape context such as connectedness to natural vegetation and management practices in restored isolated stands are available explanations for restoration effects and gaps between restored plantations and secondary oak forest.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.79-88
• /
• 2009

A planned access method on constantly-changing-community unit plan changes and develops based on the periodical situation and also plan theory. In this research, it is to present the link between the theory of complex city change and the plan factor of it, and to show how Korean residential complex plan has changed as time passed and how new concept of city plan came up and by applying new methods how can this affect our real world and the past plan. In the phase of analysis, it analyzed the flow of 'community unit plan' and its theory and investigated the factor of compositional space and built a analysis frame. The factors of community unit plan are space structure, size and shape of block, population, distribution of facilities and movement system. It chose the place that can represent the flow of community unit plan trand and that indicates the obvious development leading to Jamsil (1975), Gwa Chun (1980), Mok Dong (1983), Sang Ge (1985), Ilsan (1989), Dong tan (2001) and Eun Jung (2003) total of 7 places. And to compare a similar size of the city, it selected a small community unit. Based on the result of theoretical study and prior research, it can be said that the space composition style has change from a whole complete complex area to a linked-cross over community unit and the access of urban level was on set. Also, a pedestrian walking area was secured and the dense of building structure and pleasant environment wanting need was in balance. For facility plans, the usage of facility and functional change brought change of type, size and disposition. The walking area for pedestrian became a huge matter. Therefore, market, education, public facilities and green system collaborated to co-build a whole community unit and activated the walking environment. Also, public transportation, environment friendly city organization was built.