• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.615-621
• /
• 2016

SiC-polycrystalline fiber (Tyranno SA, Ube Industries, Ltd.) shows very high heat-resistance and excellent mechanical properties up to very high temperatures. However, further increase in the strength is required. Up to now, we have already clarified the relationship between the strength and the defect-size of the SiC-polycrystalline fiber. The defects are formed during the conversion process from the raw material (amorphous Si-Al-C-O fiber) into SiC-polycrystalline fiber. In this conversion process, a degradation of the Si-Al-C-O fiber and a subsequent sintering of the degraded fiber proceed as well, accompanied by a release of CO gas and compositional changes, to obtain the dense SiC-polycrystalline fiber. Since these changes proceed in each filament, the strict control should be needed to minimize residual defects on the surface and in the inside of each filament for achieving the higher strength. In this paper, the controlling factors of the fiber strength and the fine structure will appear.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.470-474
• /
• 1999

We have successfully grown <111>-oriented $(La,Sr)(Al,Ta)O_{3}\;(LSAT)$ mixed-perovskite single crystals and <0001>-oriented ${Ca_{8}La_{2}(PO_{4})}_{6}O_2$ (CLPA) single crystals with the apatite structure by the Czochralski method. The compositional and lattice parameter uniformity of the crystals are discussed in relation to the growth conditions. Since LSAT and CLPA single crystals have excellent lattice matching with GaN, they are promising as new substrates for the growth of high quality GaN epitaxial layers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.86-90
• /
• 1988

In this paper, the compositional and sintering time dependences of dielectric, electrooptic properties for X/55/45([Ca$.$La$.$Nb]/Zr/Ti)CLN-PZT ceramics, where X is ranged from 3.0 to 11.0 mol %, have been investigated. As CLN mol% is increased, density, curie-temperature and dielectric constant are decreased, and also grain size and transmittance are increased, With the increment of CLN mol %. longitudinal mode electromechanical coupling coefficient is decreased and P-E hysterisis loop became slim-loop slowly. The crystal structure of CLN-PZt ceramics is changed from rhombohedral to tetragonal and pseudo-cubic according to the increment of CLN mol%.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.623-629
• /
• 1992

The possible use of bioglass as implant materials is due to its biocompatibility to human body. Even if many animal studies for the bioglasses have been performed, their compositional dependences of structures and physical properties are not fully understood. In the present work, physical property measurements such as density and thermal expansion coefficient were carried out for the bioglasses, with substitution of CaO for Na2O in bioglass composition (46.1%SiO2, 24.4%Na2O, 26.9%CaO, 2.6%P2O5:mol%). Hydroxyapatite formation on the glass surface was also examined after reacted in Tris-buffer solution. As CaO was substituted for Na2O, the bond strength between nonbridging oxygen and modifier became stronger to make glass structure rigid, and resulted in increase in density and decrease in thermal expansion coefficient. When the bioglasses were reacted in Tris-buffer solution, hydroxyapatite was formed on the bioglass surface for all prepared glasses in 2 hours, independently on CaO content, and the thickness of hydroxyapatite layer was decreased a little, while the thickness of SiO2 rich layer was decreased sharply with CaO content.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.47-56
• /
• 2006

Improvements are made to existing primitive cell volume measurement method to provide a real-time analysis capability for the phase analysis of nanocrystalline materials. Simplification is introduced in the primitive cell volume calculation leading to fast and reliable method for nano-phase identification and is applied to the phase analysis of Mo-Si-N nanocoating layer. In addition, comparison is made between real-time and film measurements for their accuracy of calculated primitive cell volume values and factors governing the accuracy of the method are determined. About 5% accuracy in primitive cell determination is obtained from camera length calibration and this technique is used to investigate the cell volume variation in WC-TiC core-shell microstructure. In addition to chemical compositional variation in core-shell type structure, primitive cell volume variation reveals additional information on lattice coherency strain across the interface.

• 한국실내디자인학회논문집
• /
• 제32호
• /
• pp.13-20
• /
• 2002

This study is purposed to find fundamental characteristics in Grassi's architecture which has architectural principles in architecture itself and in the general frame of the historical facts of architecture. His architectural theories can be explained for rationality, historicity, universality. The method of architectural composition can be divided into urban morphological characteristic and compositional characteristic of architecture. The characteristics of the former are the reconstruction of the urban structure by the readjustment of an urban axis which is based on historical continuity of the city, the open court which is a passage transformed from colonnade that is the historical vernacular type and the respect for the city-line which goes with historical context. The characteristics of the latter are the use transformed of nine square which gives consideration to centrality and typology at the same time and the hierarchic division of the principal space and the subordinate space for the functional typical purpose. This analysis shows that Grassi's architecture is on the base of historical continuity and urban reality and for him architectural work is mental work which conflict with the real world for the reconstruction of the city.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.280-288
• /
• 2004

Split-type nylon/polyester microfiber and polyester microfiber fabrics possess drapeability, softness, bulkiness, and smoothness, so that they can be applied in various industrial fields. In particular, these fabrics are able to absorb various organic solvents, and can be used as clean room materials. To investigate the chemical affinity between solvents and the compositional materials of these fabrics, the contact angle of thermally pressed film fabrics was measured with different solvents. The thermally pressed nylon/polyester fabric films showed a chemical attraction to formamide. The sorption properties of the microfiber fabrics were investigated using a real time testing device, and these tests showed that the sorption behavior was more influenced by the structure of the fibrous assembly than by any chemical attraction. The effect of the fabric density, specific weight, and sample structure on the sorption capacity and rate was examined for various organic solvents. The sorption capacity was influenced by the density and the specific weight of the fibrous assembly, and knitted fabric showed a higher sorption capacity than woven fabric. However, the sorption rate was less affected in lower viscosity solvents. On applying Poiseuille's Law, the lower viscosity solvents showed higher initial sorption rates, and more easily penetrated into the fibrous assembly.

• 복식문화연구
• /
• 제29권4호
• /
• pp.603-615
• /
• 2021

The aim of this study was to analyze the semantic network structure of keywords and the visual composition of images extracted from Instagram in relation to the multi-persona phenomenon with in fashion imagery, which has recently been attracting attention. To this end, the concept of a 'secondary character', which forms a separate identity from a 'main character' on various social media platforms as well as on the airwaves, was considered as the spread of multi-persona and #SecondaryCharacter on Instagram was investigated. 3,801 keywords were collected after crawling the data using Python and morphological analysis was undertaken using KoNLP. The semantic network structure was then examined by conducting a CONCOR analysis using UCINET and Netdraw to determine the top 50 keywords. The results were then classified into a total of 6 clusters. In accordance with the meaning and context of the keywords included in each cluster, group names were assigned : virtual characters, relationship with the main character, hobbies, daily record, N-job person, media and marketing. Image analysis considered the technical, compositional, and social styles of the media based on Gillian Rose's visual analysis method. The results determined that Instagram uses fashion images that virtualize one's face to produce multi-persona representation s that show various occupations, describe different types of hobbies, and depict situations pertaining to various social roles.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.21-27
• /
• 2011

A nano-porous structure of tin oxide was prepared using an anodic oxidation process and the sample's electrochemical properties were evaluated for application as an anode in a rechargeable lithium battery. Microscopic images of the as-anodized sample indicated that it has a nano-porous structure with an average pore size of several tens of nanometers and a pore wall size of about 10 nanometers; the structural/compositional analyses proved that it is amorphous stannous oxide (SnO). The powder form of the as-anodized specimen was satisfactorily lithiated and delithiated as the anode in a lithium battery. Furthermore, it showed high initial reversible capacity and superior rate performance when compared to previous fabrication attempts. Its excellent electrode performance is probably due to the effective alleviation of strain arising from a cycling-induced large volume change and the short diffusion length of lithium through the nano-structured sample. To further enhance the rate performance, the attempt was made to create porous tin oxide film on copper substrate by anodizing the electrodeposited tin. Nevertheless, the full anodization of tin film on a copper substrate led to the mechanical disintegration of the anodic tin oxide, due most likely to the vigorous gas evolution and the surface oxidation of copper substrate. The adhesion of anodic tin oxide to the substrate, together with the initial reversibility and cycling stability, needs to be further improved for its application to high-power electrode materials in lithium batteries.

• 한국전통조경학회지
• /
• 제39권4호
• /
• pp.99-110
• /
• 2021

본 연구는 신라왕경 경주, 고려 개경, 조선 한양, 조선후기 신도시로 조성된 수원 화성을 중심으로 우리나라의 역사도시에서 나타난 도시수체계의 구성방법이 지니는 특성을 파악해보고자하는 목적을 지니고 있다. 특히 도시입지, 도로, 도시시설 배치 등을 중심으로 도시골격구조와 연계하여 물길이 지니는 의미를 살펴보고 수체계의 구성형태에 대한 해석을 통하여 도시 내 수공간 경영에 투입되었던 기술적, 계획적 요소와 함께 도시구조와의 관계를 분석하였다. 연구대상지에서는 자연수계를 기반으로 부분적인 하천 정비와 인공수계를 도입하여 도시수체계가 구축되고 있다. 특히 물과 자연수계는 도시의 입지를 결정하는 핵심요소로 작용하고 있으며 도시구조와 도시발달과정, 도시구조와 밀접한 관계를 지니고 있음을 알 수 있다. 여기에는 지리적 관념과 어우러져 물이 지니는 상징적 의미와 더불어 치수, 이수 등의 관점에서 요구되는 현실적 수요가 중요한 배경으로 자리하고 있다. 물 공간과 관련된 다양한 수요에 대응하기 위하여 도시 형성·발달과정에서 물 공간을 경영하기 위한 다양한 계획적, 기술적 요소가 도입되었다. 연구대상지에 대한 분석을 통하여 도시형성·발달과정에서 도시수체계가 지니는 계획적 요소를 종합해보면 다음과 같이 요약된다. 첫째로 연구대상지로 선정된 신라왕경 경주, 고려 개경, 조선 한양, 수원 화성의 도시수체계를 구축하는 과정에는 배수, 재해를 고려한 치수의 관점이 공통적으로 작용하고 있지만 수체계의 구축방법이나 활용성에서는 차이를 나타내고 있다. 둘째로 물과 자연수계는 도시입지의 상징적 요소로서, 그리고 지리적 관념과 어우러진 도시 입지를 결정하고 도시의 좌향을 결정하는 핵심요소로 작용하고 있다. 셋째로 도시가 형성되기 이전의 자연수계는 지형여건과 어우러져 도시 형성·발달과정에서 구축되는 도시수체계의 구성형태를 결정하는 기반으로 작용하고 있다. 넷째로 자연수계를 기반으로 구축된 도시수체계는 자연물길과 계획적 인공수로가 결합되어 도시구조의 일부로서 위계별 수계의 활용성이 차이를 나타내고 있다. 다섯째로 도시수체계는 배수체계와 재해를 고려한 치수의 관점 이외에 도시용지의 확보, 도시시설 배치와 영역 확보, 기능지역 구성, 토지구획과 연계하여 계획적으로 구축되고 있다.