• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.43-50
• /
• 2009

Design trend, transparency, which has been developed under a reflection of current periodic environment, has been exposed to people all over the world through varieties of architecture facade and interior space. As interior space follows this trend, which has difference in showing space from the past, transparency becomes an important measure of showing openness of certain space. Main objective of this research is to understand a characteristics of materials that leads transparency a important measure to the modern interior design, and this will set the range to this applicable materials for appropriate areas of defining transparency in an interior. Characteristic uses of transparent materials found in this research which leads transparency into interior space are described below: First, there are two perspectives in transparency. One is visibility and material wised transparency and the other is conditional and spacial wised transparency. With this knowledge, we can expand a level of transparency with ideas such as clarity, opacity, visible transmission, and reflection, and this broadened range will vary the acceptable materials used to show transparency. Second, transparent materials are used with many different purposes in modern interior space as furnitures, sanitary fixtures, partitions, and other structures. With using modern technology in reforming this materials brought new methods in structure composing. last, transparent materials' expnt pable characteristics made modern interior space to have a control over spacial homogeneity, a simplified octlines, weakened boundaries, and compositional effects by interference and vision.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.969-974
• /
• 1991

The influences of A(Cu1/3Nb2/3)O3(A=Pb, Ba and Sr) on the ferroelectric-paraelectric phase transition of BaTiO3 ceramics has been investigated. The tetragonality of crystal structure decreased with increasing A(Cu1/3Nb2/3)O3 content at room temperature. A linear correlation between Curie point and the tetragonality of lattice was not observed. In all three systems the variation of Curie point with the mole fraction showed similar tendency that the Curie point decreased at lower mole fraction but gradually increased in the region of higher mole fractions, Diffuse phase transitions were observed at higher mole fractions. The variation of Curie points could be explained by internal stress and Jahn-Teller distortion of BO6 due to Cu2+, and it was thought that the diffuse character of phase transition was caused by compositional fluctuation.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.149-152
• /
• 2009

Hydrotalcites are anionic clays that are quite prevalent in nature and their importance is growing more and more because of their very wide range of potential applications and uses. Understanding the structural and compositional changes that occur on the molecular scale during the thermal decomposition of hydrotalcite compounds is essential for the basic prediction and comprehensive understanding of the behavior and technical application of these materials. In this study, several hydrotalcite compounds calcined at different temperatures for applications in a chlorine resistant textile were prepared and 27-Aluminm solid-state nuclear magnetic resonance (NMR) spectroscopy was used as a tool to study their local structure and behavior. The changes in the Al coordination of the hydrotalcite compounds were investigated with one dimensional (1D) solid-state magic angle spinning (MAS) NMR spectroscopy. The two broad resonances arising from the structurally different Al coordinations of these compounds were clearly resolved by two dimensional (2D) triple quantum magic angle spinning (3QMAS) NMR spectroscopy.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.334-341
• /
• 2019

Organometal halide perovskite materials have attracted much attention in the photovoltaic and light emitting devices due to the compositional flexibility with AMX₃ formula (A is an organic amine cation; M is a metal ion; X is a halogen atom). The addition of homovalent or heterovalent metal cations to the bulk organohalide perovskites has been performed to modify their energy band structure and the relevant optoelectronic properties by ligand-assisted ball milling. Here, we report CH₃NH₃Pb_1-xM_xBr₃ nanocrystals substituted by metallic cations (M is Sn²⁺, In³⁺, Bi³⁺; x = 0, 0.01, 0.02, 0.05, 0.1, 0.2). Photoluminescence and quantum yield was significantly reduced with increasing metallic cations content. These quenching effect could be resulted from the metal cations that behave as a non-radiative recombination center.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.384-390
• /
• 2021

In this paper, durability evaluation and surface damage mechanism were investigated through solid particle erosion (SPE) test after applying hot-dip aluminizing (HDA) technology for the purpose of maintenance of marine economizer tube. Damaged surface shape was analyzed using SEM and 3D microscope. Compositional changes and microstructure of the HDA layer were analyzed through EDS and XRD. Durability was evaluated by analyzing weight loss and surface damage depth after SPE. HDA was confirmed to have a two-layer structure of Al and Al₅Fe₂. HDA+HT was made into a single alloy layer of Al₅Fe₂ by diffusion treatment. In the microstructure of HDA+HT, void and crack defect were induced during the crystal phase transformation process. The SPE damage mechanism depends on material properties. Plastic deformation occurred in the substrate and HDA due to ductility, whereas weight loss due to brittleness occurred significantly in HDA+HT. As a result, the substrate and HDA showed better SPE resistance than HDA+HT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• 전기화학회지
• /
• 제13권4호
• /
• pp.270-276
• /
• 2010

기공 경사화된 마이크론 단위의 구조 틀 및 나노 수지상 구조 벽을 가지는 니켈-구리 거품 전극을 전기화학적인 방법으로 합성하였다. 전해 도금 시 순수한 니켈은 치밀한 층으로 성장하는 양상을 보였으나, 구리와 함께 도금시키는 경우 그 성장 양상이 순수한 니켈과는 매우 다르게 관찰되었다. 특히, 첨가제로써 염소 이온의 농도가 증가함에 따라 니켈-구리 도금 층의 수지상 성장이 뚜렷해지는 모습을 보였다. 또한, 기재와 먼 부분일수록 도금 층 내 구리 대비 니켈의 상대적인 양이 감소하였으며, 염소 이온 농도가 높아짐에 따라 전 도금 층에 걸쳐 니켈의 양이 증가하였다. 수지상 구조 벽의 가지 내부 조성을 분석한 결과, 중심부로 갈수록 구리 함량이 점차 높아지는 조성 구배를 확인하였으며, 적절한 열처리를 통해 상호 확산을 유도하여 균일한 조성의 니켈-구리 합금을 얻어낼 수 있었다. 본 연구를 통해 제작된 재료는 기능성 전기 화학 장치용 고성능 전극에 활용될 수 있을 것으로 기대된다.

• Journal of Ecology and Environment
• /
• 제39권1호
• /
• pp.1-10
• /
• 2016

Despite it has been mentioned that the successful restoration in landscape level was achieved in the Young-il soil erosion control project, quantitative evaluation of restored plant communities (Alnus firma as introduced species and Pinus thunbergii as native species) was hardly founded. Light availability, litter and woody debris cover, and forest structure and composition were determined for 500 m² band-quadrat in three forest types. Abiotic factors of Q. serrata stands, as reference forest, and A. firma stands were similar but not for P. thunbergii stands. There were no significant difference on mean stem density (stems ha^-1, H = 3.6, p = 0.162), and the mean basal area of each stand had marginal significance (m² ha^-1, H = 5.7, p = 0.058) among stands as total basal area was higher with the order of A. firma (21.4 m² ha^-1), P. thunbergii (19.8 m² ha^-1) and Q. serrata (16.2 m² ha^-1). Restoration of vegetation structure was more effective in fast-growing and N-fixing A. firma, as introduced species plantation. However, result of MRPP, NMS ordination and ISPAN for herbaceous layer, not for tree and shrub species composition, indicated that restoration of ground vegetation was likely influenced highly from local environment. Propagule availability from landscape context such as connectedness to natural vegetation and management practices in restored isolated stands are available explanations for restoration effects and gaps between restored plantations and secondary oak forest.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.79-88
• /
• 2009

A planned access method on constantly-changing-community unit plan changes and develops based on the periodical situation and also plan theory. In this research, it is to present the link between the theory of complex city change and the plan factor of it, and to show how Korean residential complex plan has changed as time passed and how new concept of city plan came up and by applying new methods how can this affect our real world and the past plan. In the phase of analysis, it analyzed the flow of 'community unit plan' and its theory and investigated the factor of compositional space and built a analysis frame. The factors of community unit plan are space structure, size and shape of block, population, distribution of facilities and movement system. It chose the place that can represent the flow of community unit plan trand and that indicates the obvious development leading to Jamsil (1975), Gwa Chun (1980), Mok Dong (1983), Sang Ge (1985), Ilsan (1989), Dong tan (2001) and Eun Jung (2003) total of 7 places. And to compare a similar size of the city, it selected a small community unit. Based on the result of theoretical study and prior research, it can be said that the space composition style has change from a whole complete complex area to a linked-cross over community unit and the access of urban level was on set. Also, a pedestrian walking area was secured and the dense of building structure and pleasant environment wanting need was in balance. For facility plans, the usage of facility and functional change brought change of type, size and disposition. The walking area for pedestrian became a huge matter. Therefore, market, education, public facilities and green system collaborated to co-build a whole community unit and activated the walking environment. Also, public transportation, environment friendly city organization was built.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.398.1-398.1
• /
• 2014

The $Cu_2ZnSnSe_4$ (CZTSe) thin films solar cell is one of the next generation candidates for photovoltaic materials as the absorber of thin film solar cells because it has optimal bandgap (Eg=1.0eV) and high absorption coefficient of $10^4cm^{-1}$ in the visible length region. More importantly, CZTSe consists of abundant and non-toxic elements, so researches on CZTSe thin film solar cells have been increasing significantly in recent years. CZTSe thin film has very similar structure and properties with the CIGS thin film by substituting In with Zn and Ga with Sn. In this study, As-deposited CZTSe thin films have been deposited onto soda lime glass (SLG) substrates at different deposition condition using Pulsed Laser Deposition (PLD) technique without post-annealing process. The effects of deposition conditions (deposition time, deposition temperature) onto the structural, compositional and optical properties of CZTSe thin films have been investigated, without experiencing selenization process. The XRD pattern shows that quaternary CZTSe films with a stannite single phase. The existence of (112), (204), (312), (008), (316) peaks indicates all films grew and crystallized as a stannite-type structure, which is in a good agreement with the diffraction pattern of CZTSe single crystal. All the films were observed to be polycrystalline in nature with a high (112) predominant orientation at $2{\theta}{\sim}26.8^{\circ}$. The carrier concentration, mobility, resistivity and optical band gap of CZTSe thin films depending on the deposition conditions. Average energy band gap of the CZTSe thin films is about 1.3 eV.