• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.304-309
• /
• 2001

With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of Fe$_2$O$_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with loss tangent(${\mu}$r"/${\mu}$r′) displays more than 1 within the frequency band of 2MHz～9.5MHz when the composition ratio of NiO was ranged around 8.5～9.5 mol% and the sintering temperature was 1,080$^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제5권5호
• /
• pp.994-1000
• /
• 2001

정보통신기술의 발달과 전자기기의 사용량 증가에 따른 전자파장애의 발생이 점차 사회 문제화되면서 그 대책이 요구됨에 따라 전자파 흡수체에 대한 관심도 증가되고 있는데 본 연구에서는 전자파 흡수체로 알려진 NiCuZn 페라이트의 조성비 및 소결온도 변화에 따른 복소유전율과 복소투자율의 주파수 의존 특성을 알아보고 전자파 흡수성능에 대한 영향을 조사하였다. NiCuZn 페라이트의 조성 중 $Fe_2O_3$및 ZnO를 각각 49.0, 34.0mol%로 고정하고 NiO 및 CuO의 구성비를 변화시켜 측정한 결과 NiO의 구성비가 8.5~9.5 mol%의 범위에서, 소결온도는 $1080^{\circ}C$에서 초투자율 및 유전율이 크고 $loss tangent(=\mur"/\mur')$가 약 2 MHz~9.5 GHz 주파수 대역에서 1 이상을 보이며 전파흡수 성능이 가장 우수하게 나타났다.나타났다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.744-751
• /
• 1995

This paper describes a study on absorption properties of electromagnetic wave by the composition ratio of Ni-Zn ferrite. Ni-Zn ferrite was composed of 48-52mol% Fe$\_$2/O$\_$3/, 18-22mol% NiO and 26-34mol% ZnO. The sintering of the composition was carried out at 1200.deg. C for 2 hours. Through the experiments, it was found that the resonance phenomenon occured at low frequency range for high permeability and vice versa. In the case of the composition of 49mol% Fe$\_$2/O$\_$3/, 20mol% NiO and 31mol% ZnO, the bandwidth ranged from 0.35GHz to 0.95GHz with the absorption thickness of 10mm. Also, in the case of the composition 51mol% Fe$\_$2/O$\_$3/, 22mol% NiO and 27mol% ZnO, the bandwidth ranged from 0.48GHz to 1.2GHz with the absorption thickness of 6mm.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.820-826
• /
• 2008

Differ number of seismograph to the composition dam by recently frequent earthquake and analyzed responsiveness. Interest for dam inner place by increase of something wrong flood and inside and outside of the country earthquake appearance according to unusual change of weather is risen, on important urea in dam safety floodgate school register by structural safety divide can. Therefore, by PMP (PMF) of dam and increase of domestic earthquake occurrence, need research about earthquake resistant nature ability estimation of water resources facilities. Because responsiveness analysis applies number 0.154 ~ 0.25 g of seismograph, seismic wave that use in analysis is being suitable in dynamic analysis of construction such as Rockfill dam from representative chapter cycle faction and recommend in domestic internal examination design workbook, and use results applied much Hachinohe wave onions in van abroad.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.34-40
• /
• 2002

본 연구에서는 해안선 부근의 장주기파가 해안침식과 관련이 있음에 주목하며 심해파의 특성으로부터 천해역의 장주기파의 파고를 추정하기 위해 파고계 3대를 해안으로부터 외해방향의 해안종단 방향으로 일직선상에 배치하여 현장관측을 실시하고 그 결과를 분석하였다. 아울러, 장주기파의 발생기구에 관한 기존의 이론을 현장관측을 통해 검증하고, 장주기파의 발생기구를 토대로 심해파 제원과 천해역의 장주기 파고와의 관계를 검토하였다. 관측된 장주기파는 기존의 이론과 대체적으로 일치하였으며, 심해파와 장주기파 사이에는 선형적인 대응이있음을 확인하였다. 또한, 장주기파의 공간적·시간적 변화를 추가하기 위하여 각 지점별로 관측된 장주기파를 합성함으로서 장주기파의 파고를 계산하였다. 그 결과, 장주기파와 심해파 사이의 관계는 더욱 뚜렷한 경향을 나타내었으며, 양자로부터 장주기파의 추정식을 도출할 수 있었다. 따라서, 이를 이용함으로서 해당지역의 천해역에 존재하는 장주기파랑의 규모가 심해파랑의 자료로부터 예견될 수 있을 것으로 사료된다.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.137-150
• /
• 2020

In this research work, the analytical rotating vibration for functionally graded shell with ring supports are restricted to some volume fraction laws based on Rayleigh-Ritz technique. The frequencies of functionally grade cylindrical shells have been investigated for the distribution of material composition of material with two kinds of material. Stability of a cylindrical shell depends highly on these aspects of material with ring supports. The frequency behavior is investigated with fraction laws versus circumferential wave number, length-to-radius and height-to-radius ratios. The frequencies are higher for higher values of circumferential wave number. The frequency first increases and gain maximum value with the increase of circumferential wave mode. Moreover, the effect of angular speed is also investigated. It is examined that the backward and forward frequencies increases and decreases on increasing the ratio of height- and length-to-radius ratios.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.107-108
• /
• 2007

In this paper, the EM wave absorbers were designed and fabricated for collision-avoidance radars using Carbon of a dielectric material and Permalloy of a magnetic material with CPE, because radar system has some problems including false image and system-to-system interference. We fabricated some samples in different composition ratio of Carbon and Permalloy, and defined that optimum composition ratios of Carbon and Permalloy with CPE were Carbon:CPE=20:80 wt% and Permalloy:CPE=70:30 wt%. And absorption abilities at different thicknesses of the EM wave absorbers were simulated using the material properties. The EM wave absorbers were manufactured based on the simulated design. Simulated and measured results agree very well.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.306-309
• /
• 2003

Carbon uses included (32 wt %) Silicone Rubber, use different composition and thickness and investigated effect and special quality that get to electromagnetic absorber to sintering style Ba Ferrite that have composition of Fe$_2$O$_3$: $Ba_2$CO$_3$= 82.1 : 17.9 wt% to develop high efficiency X-Band electric wave absorber