• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.103-110
• /
• 2018

함정으로부터 방사되는 적외선 신호는 주로 함정의 내연 기관에 의해 발생하는 내부적 신호와 태양열에 의해 가열된 함정 표면에서 발생하는 외부적 신호로 분류된다. 이중 내부적 신호는 주요 추진 체계를 구성하는 가스 터빈 및 디젤 엔진 폐기 가스의 화학적 조성 인자들($CO_2$, $H_2O$, CO, soot)에 의해서도 영향을 받게 된다. 따라서 본 연구에서는 현재까지 국내 함정에 탑재된 가스 터빈과 디젤 엔진에서 생성되는 폐기 가스의 화학적 조성비를 조사하여 인자와 수준을 선정하였으며, 직교 배열 실험 계획법으로 폐기 가스의 화학적 조성 인자들과 구성 비율이 함정의 적외선 신호에 미치는 영향을 연구하였다. 적외선 신호 해석 프로그램을 이용하여 계산된 폐기 가스의 적외선 신호 강도는 분석의 용이성을 높이기 위해 신호 대 잡음비로 변환하여 제시하였다. 신호 분석 결과, 가스 터빈과 디젤 엔진 모두 중적외선 대역의 신호에는 $CO_2$, soot 및 $H_2O$가 주요영향인자임이 밝혀졌다. 그리고 원적외선 대역의 신호에는 $H_2O$와 $CO_2$가 주요한 영향을 미치는 인자임을 확인하였다.

• 한국물환경학회지
• /
• 제34권4호
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권12호
• /
• pp.1718-1734
• /
• 2009

The aim of this review is to address some characteristics that influence meat quality. Genetic groups, nutrition, finishing systems and gender are the major factors that change carcass characteristics, chemical composition and fatty acid profile. Genetic groups that have zebu genes in their composition show higher hot carcass dressing than genetic groups without zebu genes. Genetic groups that have European breeds in their composition have higher marbling scores. On the other hand, genetic groups that have zebu breeds show low marbling scores. Bulls finished in feedlots present higher final weight than steers, cull cows and heifers. Fat thickness is one of the principal parameters that are affected by different gender. Cull cows (4.72 mm) and heifers (4.00 mm) present higher values than bulls (1.75 mm) and steers (2.81 mm). The major effects observed by different systems of termination are fat thickness and marbling. Crude protein presents variation due to nutrition. Nutrition influences variation of fatty acid profile. Genetic groups also influence fatty acid profile. Genetic groups that have zebu genes in their composition show high percentage of PUFA. The major class of fatty acids that is changed with nutrition is PUFA. The better ratios of PUFA/SFA and n-6/n-3 are found in Longissimus muscle of animals finished in pasture systems.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.1-11
• /
• 2000

The influence of the first coating layer on the properties of the second coating layer is reported. For various model coating composition, ratios of first and second coating weights are used to generate coating layers. The void volume, pore size distribution and light scatter coefficient of the coatings are measured. In some cases, the fine material from the second layer seems to penetrate the first layer to reduce the void fraction of the total system. Rapid setting coating, for example thin layers on porous first layer tends to generate porous coating layers.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• 한국대기환경학회지
• /
• 제19권1호
• /
• pp.45-56
• /
• 2003

In this study the distribution patterns of the metallic components were analyzed both before and after the Asian Dust (AD) events at 2001 by comparing the chemical composition of metallic components in terms of various statistical methods. According to the AD/NAD concentration ratio of metallic components, the main components of crustal soils were exhibiting the values above 1.0; but opposite results were seen dominantly for hazardous metallic components. Examination of fine-to-coarse (F/C) ratios of metallic components showed higher values for major anthropogenic components including Pb (5.83). Ni (2.61), etc. Comparison of our measurement data with those obtained within and across the Korean peninsula indicated that the metallic distribution patterns of the study area can be distinguished from previous studies. The results of our analysis, when investigated in relation with air mass movement patterns. indicated evidence of the direct influence of AD events and anthropogenic processes.

• Journal of Ginseng Research
• /
• 제9권1호
• /
• pp.64-71
• /
• 1985

Free and esterified sterols in neutral lipid fractionated from the free lipid of Korean white ginseng (Panax ginseng C.A. Meyer) were analyzed by TLC and GLC to investigate the contents and composition ratios. Content of each sterol was as follows: ${\beta}$-sitosterol was about 51.60 mg%, stigmasterol, 8.93mg% and campesterol, 2.17mg%. Fine root tended to have slightly higher contents of sterols than main root. Linoleic and palmitic acid as the major fatty acids in esterified sterols occupied 70% of the total composition.

• 한국식품영양학회지
• /
• 제26권3호
• /
• pp.447-452
• /
• 2013

This study investigated the quality characteristics of Yanggaeng with different amounts (in ratios of 0, 1, 2, 4% to the total materials) of tumeric powders. The proximate composition and total polyphenol content, antioxidant activities, Hunter's color values, pH, Brix and sensory properties of tumeric hanging were examined. Results of analysis of the proximate composition analysis showed that ash content was increased significantly by adding turmeric powder and the more content of turmeric powder. The higher content of tumeric powder, the higher total polyphenol and total flavonoids contents. Brix and brightness were lowered and yellowness was increased. The sensory properties were highly rated for the control without turmeric powder in four organoleptic (sensory) properties (taste, texture, odor, acceptance) except color. The group with-1% addition of turmeric powder was highly rated in the second place.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.372-376
• /
• 1998

Using calcium-phosphate-powder targets with the Ca/P ratios of 1.0-1.67, hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) thin films with 4-7㎛ thickness were prepared on titanium metal plates by r.f. magnetron sputtering, followed an annealing at $200^{\circ}C$ for 24 hr under a high water vapor pressure using an autoclave. All the specimens were systematically characterized by XRD, FT-IR, SEM and EDS analyses. The post-annealed films were confirmed to be a nonstoichiometric oxyhydroxyapatite by XRD and FT-IR measurements.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.124-127
• /
• 2011

Quantum dots were designed within a GRIN-SCH(Graded index - Separate confinement Heterostructure) heterostructure to create a high power InAlAs/AlGaAs laser diode. 808 nm light emission was with a quantum dot composition of In0.665Al0.335As and wetting layer composition of Al0.2Ga0.8As by LASTIP simulation software. Typical characteristics of GRIN structures such as high confinement ratios and Gaussian beam profiles were shown to still apply when quantum dots are used as the active media. With a dot density of 1.0x1011 dots/cm2, two quantum dot layers were found to be good enough for low threshold, high-power laser applications.