• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.207-215
• /
• 2020

The feasibility of rare earth (RE) removal process via oxidation reactions with UCl₃ was investigated using the HSC Chemistry code to reduce the concentrations of RE in transuranic (TRU) products. The composition and thermodynamic data of TRU and RE elements contained in the reference spent fuel were examined. The reactivity was evaluated by calculating equilibrium data considering oxidation reactions with UCl₃. Both RE removal rate and TRU recovery rate were evaluated for the two cases, wherein TRU products with different RE concentrations were used. When TRU products were reacted with UCl₃, selective oxidation was driven by the difference in the Gibbs free energy of each element. The calculation results imply that the TRU/RE ratio of the final product can be increased by removing RE elements while maintaining the maximum recovery rate of TRU, which is accomplished by controlling the amount of UCl₃ injected. Since the results of this study are based on thermodynamic equilibrium data, there are many limitations to apply to the actual process. However, it is expected to be used as an important data for the process design to supply the TRU product of pyroprocessing to SFR's fuel demanding low RE concentrations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.657-665
• /
• 2010

Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.226-235
• /
• 2012

Floristic composition and phytosociological studies in Mt. Gwaebyung and Galmi-Bong were investigated to classify forest vegetation and distribution of vascular plants. We investigated two study sites from April to September, 2011. Total 477 taxa with 93 families, 279 genera, 408 species, 4 subspecies, 56 varieties and 9 forms were distributed in Mt. Gwaebyung and Galmi-Bong. Korean endemic species were composed of 8 families with 11 genera and 11 species. The plant species which is designated as protected species by the Ministry of Environment, Korea was 2 families, 2 genera and 2 species. Also plant species which is designated by the Korea National Arboretum was 16 taxa with 13 families, 14 genera, 15 species and 1 variety. A naturalized plants were 17 taxa. The Naturalization index and Urbanization index were 3.6% and 5.3% respectively. Pteridophyta-calculation (Pte-Q) was 1.00. Life form spectra was $H-D_4-R_5-e$ type and the highest percentage of useful plant resources were medicinal plant (77.5%). The forest vegetation in Mt. Gwaebyung and Galmi-bong was classified into 1 order, 1 alliance and 4 communities; Rhododendro - Quercetalia mongoliaceae, Lindero-Quercion mongolicae, Quercus mongolica Typical Community, Pinus densiflora-Quercus mongolica Community, Larix kaempferi Community and Sasa borealis-Quercus mongolica Community.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1271-1276
• /
• 2015

The recent trend is that diesel power generation on islands where its prime cost for power generation is high is replaced by new and renewable energy. Therefore, south Jeolla province is progressing the construction project of self-sufficient islands for the areas where power is supplied by depending on diesel generators, which is the project that power is supplied through eco-friendly energy source using sunlight, wind power and energy storage device etc. However, it is difficult to construct new and renewable energy source with the capacity to respond to the load perfectly due to its environmental and geographical conditions regarding capacity design of new and renewable energy. Besides, Microgrid design considering appropriate capacity design of the system components and efficient operation is required through the analysis of climate conditions and load patterns from the design stage for optimal composition of a hybrid system with economic feasibility. Therefore, this study is aimed to conduct a research on optimal combination, capacity calculation and economic feasibility by comprising a hybrid power generation system which will replace 40% of power generation by diesel as new and renewable energy source for Geomun Island where has more than 300 households and requires expansion of the facility among islands located in southwest coast.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.91-100
• /
• 2016

The neutron activation inventories in reactor vessel and its internals, and bio-shield of a PWR nuclear power plant were calculated to evaluate the effect of impurity elements contained in the structural materials on the activation inventory. Carbon steel is, in this work, used as the reactor vessel material, stainless steel as the reactor vessel internals, and ordinary concrete as the bio-shield. For stainless steel and carbon steel, one kind of impurity concentration was employed, and for ordinary concrete five kinds were employed in this study using MCNP5 and FISPACT for the calculation of neutron flux and activation inventory, respectively. As the results, specific activities for the cases with impurity elements were calculated to be more than twice than those for the cases without impurity elements in stainless and carbon steel. Especially, the specific activity for the concrete material with impurity elements was calculated to be 30 times higher than that without impurity. Neutron induced reactions and activation inventories in each material were also investigated, and it is noted that major radioactive nuclide in steel material is Co-60 from cobalt impurity element, and, in concrete material, Co-60 and Eu-152 from cobalt and europium impurity elements, respectively. The results of this study can be used for nuclear decommissioning plan during activation inventory assessment and regulation, and it is expected to be used as a reference in the design phase of nuclear power plant, considering the decommissioning of nuclear power plants or nuclear facilities.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.587-590
• /
• 2013

Solid-liquid equilibria for mixtures composed of n-vinyl-2-pyrrolidone (NVP) and 2-pyrrolidone were measured as a basic study for the melt crystallization process to remove 2-pyrrolidone as impurity included in NVP. A differential scanning calorimeter (DSC) and a crystallizer were used and the experimental results obtained from two methods were similar. The mixture showed a eutectic system which has a single composition at the minimum melting temperature. Calculation results from simple thermodynamic equations were found in general agreements with present data. To determine the growth rate of NVP crystal which is important for the design of crystallization process, thicknesses of the crystal were measured with the time using a layer melt crystallizer. The growth rates increased as cooling temperatures decreased. Heat transfer coefficient correlated from present data was found to successfully describe the crystal growth behavior.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.196-201
• /
• 2005

The aim of this study was to confirm the validity of predictive equations for the calculation of basal energy expenditure (BEE). One hundred twenty female college students were participated in this study. The resting energy expenditure (REE) was measured by indirect calorimetry for 30 minutes following an 12 hour overnight fasting. Among the available equations for predict BEE, Harris-Benedict, WHO/FAO/UNU and Cunningham methods were selected. Body composition was estimated by bioelectrical impedance analysis (BIA) for the equation of predicted BEE. The mean of measured REE was 1257.2$\pm$147.9 kcal/day, while the predicted value by Harris-Benedict, WHO/FAO/UNU and Cunningham were 1373.3$\pm$45.4 kcal/day, 1290.0$\pm$61.7 kcal/day and 1187.6$\pm$49.2 kcal/day, respectively. The Cunningham equation was more closed to measured values than Harris-Benedict and WHO/FAO/UNU equation by the correlation coefficient. Comparing Pearson's correlation coefficients, fat-free mass (FFM), body surface area (BSA) and body weight were higher than others such as height, body mass index (BMI), fat and fat%. The FFM's correlation coefficient was the highest as 0.74. Thus, the conclusion of this study suggested that the main determinant of BEE was FFM, and we derived a prediction equation as follows: BEE=-569.86+48.27 (FFM).

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.623-630
• /
• 2006

The slag viscosity is an important factor determining the operation temperature of entrained flow type of gasifiers. The temperature of critical viscosity, $T_{cv}$, for 5 crystalline slags was predicted by empirical models and FactSage equilibrium calculations, and the validity of each method was tested. Two empirical models were employed: one using $T_h$ from the ash fusion test, and the other using the concentrations of 5 major components. The first model using $T_h$ over-predicted $T_{cv}$ by $20{\sim}100^{\circ}C$, while the model based on the slag composition under-predicted $T_{cv}$ by $80{\sim}120^{\circ}C$. In the equlibrium calculations, $T_{cv}$ was obtained from the liquidus temperature. When the 4-major component concentrations were used in the calculation, the predicted temperatures were higher than the observed. The liquidus temperature was very sensitive to the concentrations of minor components, and the addition of MgO and $Na_2O$ lowered the liquidus temperature. The results with 4 major and 3 minor components most closely described experimentally observed $T_{cv}$. In the case that a chromia refractory was used, it was shown that $Cr_2O_3$ concentration in the slag also needs to be included for more accurate prediction of $T_{cv}$.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.422-429
• /
• 2011

Dependence of radical and ion density on electron density and temperature is numerically investigated for $Cl_2$/Ar, $CF_4$, $CF_4/O_2$, $CF_4/H_2$, $C_2F_6$, $C_4F_8$ and $SF_6$ discharges which are widely used for etching process. We derived a governing equation set for radical and ion densities as functions of the electron density and temperature, which are easier to measure relatively, from continuity equations by assuming steady state condition. Used rate coefficients of reactions in numerical calculations are directly produced from collisional cross sections or collected from various papers. If the rate coefficients have different values for a same reaction, calculation results were compared with experimental results. Then, we selected rate coefficients which show better agreement with the experimental results.

• Journal of Science Education
• /
• v.44 no.3
• /
• pp.331-344
• /
• 2020

This study aims to find meaningful implications for the development of Korean elementary school math education courses and textbooks by comparing and analyzing the number and arithmetic areas of Korean and Canadian math textbooks in fifth and sixth grades. To this end, the textbook composition system of Korean and Canadian elementary schools was compared and analyzed, and the number and timing of introduction of math textbooks and math textbooks by grade, and the number in fifth and sixth grade and the learning contents of math textbooks were compared and analyzed. The following conclusions were obtained from this study: First, it is necessary to organize a textbook that can solve the problem in an integrated way by introducing the learned mathematical concepts and computations naturally in the context of problems closely related to real life, regardless of the type of private calculation or mathematics area. Second, it is necessary to organize questions using materials such as real photography and mathematics, science, technology, engineering, art, etc. and to organize textbooks that make people feel the necessity and usefulness of mathematics. Third, sufficient learning of the principles of mathematics through the use of various actual teaching aids and mathematical models, and the construction of textbooks focusing on problem-solving strategies using engineering tools are needed. Fourth, in-depth discussions are needed on the timing of learning guidance for fractions and minority learning or how to organize and develop learning content.