• 산업진흥연구
• /
• 제8권3호
• /
• pp.137-152
• /
• 2023

세계는 시간이 흐를수록 글로벌 사회로 나아가고 있기에 외국에서 출생한 사람의 사주를 해석하는 일은 앞으로 점점 늘어날 수밖에 없는 것은 당연한 현실이다. 출생 시간이 달라진다면 명리학 이론에서는 큰 문제가 생긴다. 그러므로 본 연구자는 외국 출생자의 사주 간명을 할 때 출생국가의 현지 표준 시간을 사용하는 것인지 한국시간대로 환산하는 것인가의 문제에 있어서는 태양의 위치가 시각과 날짜를 결정하기 때문에 출생한 현지의 표준 시간을 사용하는 것이 타당하다는 결론을 내렸고 이를 뒷받침할 동서양 각국의 진태양시 보정에 관한 연구를 위해 현재 쓰이고 있는 국가표준시와 실제 경도선에 맞춘 진태양시와의 시간 차이가 예상되는 주요 국가들과 주요 도시들을 엄선하여 결과를 환산해 도출했다. 연구 결과 국가표준시와 진태양시의 시간은 보편적인 생각보다 매우 심한 차이가 난다는 사실을 확인할 수가 있었다. 한편, 실제 외국 출생자의 사주 사례를 통하여 정확한 시차가 태어난 날짜와 절입 시각 등에 영향을 끼치는 것 이외에도 서머타임이 사주 구성에 미치는 큰 영향도 알아볼 수 있었다. 본 연구의 결과를 통해 외국 출생자의 사주 간명을 위한 동서양 각국의 진태양시 보정에 관한 명리학적 이론의 체계적인 기틀을 다졌다고 생각되며, 이로 인해 외국 출생자의 사주 간명 방법에 대하여 혼란을 줄일 수 있는 계기가 될 수 있을 것이라 사료된다.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.166-172
• /
• 2018

상악 전치부 치료 시에는 다양한 구도 속에서 체계적인 진단을 통해 적절한 형태와 배열, 색조를 가지는 수복물을 제작하여 심미적으로 환자가 만족할 수 있는 결과를 이끌어내야 한다. 이를 위해 치아 구도, 치은구도, 안면구도, 치아-안면 구도의 4가지 구도 속에서 조화를 이루는 진단 및 치료계획이 필요하다. 심미적인 욕구가 강한 경우, 주관적인 환자의 심미안을 만족시키면서 기능적인 부분을 확인하기 위해, 적절한 임시 수복물을 제작하여 기능적, 심미적 측면의 평가가 필요하다. 최종 보철물 제작에 이중 스캔을 이용하여 임시 수복물의 정보를 반영할 수 있다. 본 증례는 상악 전치부가 비심미적인 환자에서, 체계적인 심미 분석 하에 임시 수복물을 제작하고 기능적, 심미적 측면을 평가 및 수정하여, 이중 스캔을 통해 임시수복물의 정보를 최종 수복물에 반영 후 최종 수복한 증례이다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1266-1266
• /
• 2001

Pasture composition, an important attribute determining sward condition and value, is normally assessed by hand separation, drying and measuring weight contribution of each species in the mixture. This is a tedious, time and labour consuming procedure. NIRS has demonstrated the potential for predicting botanical composition of swards, but most of the work has been carried out on dry samples. The aim of this work was to evaluate the feasibility of developing NIR models for predicting the white clover and ryegrass content in fresh or dry mixtures artificially prepared from pure samples of both species. Mixtures from pure stands of white clover(Trifolium repens) and perennial ryegrass (Lolium perenne) were prepared with different proportions (0 to 100%) of each species (fresh weight). A total of 55 samples were made (11 mixtures,5 cuts). Spectra (400 to 2500 nm) were taken from fresh chopped (rectangular cuvettes, transport sample module) samples, in a NIR Systems 6500 scanning monochromator controlled by the software NIRS 3 (Infrasoft International), which was also utilized for calibration development. Different math treatments (derivative order, subtraction gap and smooth segment) and a scatter correction treatment of the spectra (SNV and Detrend) were tested. Equations were developed by modified partial least squares. Prediction accuracy evaluated by cross-validation, showed that percentage of clover or ryegrass, as contribution in dry weight, can be successfully percentage of clover or ryegrass, as contribution in dry weight, can be successfully predicted either on fresh or dried samples, with equations developed by different math treatments. Best equations for fresh samples were developed including a first, second, or third derivative, whereas for dry samples best equations included a second or third derivative. Standard errors of ross validation were about 6% for fresh and 3.6% for dry samples, Coefficient of determination of cross validation (1-VR) were over 0.95 times the value of SECV for fresh samples and over 8 times the value of SECV for dry samples. Scatter correction (SNV and Detrend) in general improved prediction accuracy. It is concluded more precise on dried and ground samples, it can be used with an acceptable error level and less time and labour, on fresh samples.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1563-1571
• /
• 2003

This paper is the second part of several companion papers which compare the method of Air-fuel ratio(AFR) determination. In the previous paper, Eltinge chart was applied to the arbitrary fuel composition and the charts for gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane and butane were illustrated. In Eltinge chart, however, unburned hydrocarbon (UHC) is not used for determination of AFR. For improving accuracy, Eltinge suggested UHC compensation after the AFR reading in the chart. This compensation reduced the difference between real and reading value. In the compensation, however, the correction of oxygen and carbon dioxide is uncertain and there might be a mistake in conversion of UHC reading value. Therefore, the error is overestimated comparing with Spindt one which is most widely used. In addition, there is no comparison of the value with other useful methods. In this paper, the compensation of unburned HC was performed in Eltinge chart and the compensated value was compared with Spindts formula over wide range of AFR. The objects of investigating fuel are gasoline, methanol, NG and LPG. The result shows that Eltinge and Spindt method is flawlessly compatible and the difference between the two methods is under 0.3% in a λrange from 0.9 to 1.7. The method fur debugging instrumentation error is also presented.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.489-495
• /
• 2009

A novel technique to measuret of viscoelastic properties of polymers is proposed to investigate complex Poisson's ratio as a function of frequency. The forced vibration responses for the samples under the normal and the shear deformation are to be measured with varying load masses. The measured data were used to obtain the viscoelastic properties of the material based on an accurate 2D numerical deformation model of the sample. The 2D model enabled us to exclude data correction by the empirical form factor used in 1D model. Comprehensive measurements of viscoelastic properties of two slightly varied silicone RTV rubber ($Silastic^{(R)}$ S2) compositions were performed. Standard composition (90% PDMS polymer + 10% catalyst) and modified composition (92.5% polymer + 7.5% catalyst) were tested in temperature range from $30^{\circ}C$ to $70^{\circ}C$. Shear modulus, modulus of elasticity, loss factor, and both the real and the imaginary parts of the Poisson's ratio were determined for frequencies from 50 to 400Hz in the linear deformation regime (at relative deformations $10^{-4}{\sim}10^{-3}$).

• 대한방사선기술학회지:방사선기술과학
• /
• 제30권3호
• /
• pp.251-257
• /
• 2007

디지털 MTF의 정확도를 결정하는 요소로는 정확한 엣지 각도의 결정, 합성 ESF 또는 합성 LSF을 작성을 위한 재 샘플링, 스무징, 커브핏팅 등을 들 수가 있다. 본 실험에서는 Edge를 이용한 MTF커브 핏팅방법을 구현하였고, 슬릿법에 의한 MTF산출결과와 비교하였다. 실험결과 공간주파수 2.0 LP/mm 근방까지의 저주파수영역에서는 엣지법이 높은 수치를 나타내며 2.0 LP/mm 이상의 주파수 영역에서는 MTF값이 역전이 되어 슬릿법이 더욱 높은 값을 나타내었다. 이는 Cunningham의 보고와 완전히 일치한다.

• 한국의상디자인학회지
• /
• 제21권1호
• /
• pp.115-129
• /
• 2019

This study aimed to develop methods for technical design education that can be intimately connected to the industrial field. For this, technical design jobs performed in the fields of the domestic and foreign fashion industries and their required competences were examined, and educational methods based on constructivism were proposed. Korean fashion technical designers' works were identified, and then the fashion technical designer's responsibilities and qualifications were collected and analyzed from global employment sites. On the basis of the collection and analysis, hands-on staff members and education experts were interviewed about required competences for the actual business and possible suitable methods for education. The results of research showed that in the case of the US, job systems and relevant duties for technical designers were clearly defined by clothing brands, whereas in Korea, businesses were systematized around vendors, not brands, and as a result the businesses of technical package composition and specification proposals were not performed properly. This study organized the contents of technical design education into fit development and specification, the composition of technical design packages, the evaluation and approval of samples, fit schedule management and fitting, block pattern setting and pattern correction, sewing specifications appropriate for styles and materials, grading, technical terms, and production management. As for the technical design education models, the cognitive apprenticeship model, resource-based learning, the problem-based and anchored model, and the problem-based and resource-based models were proposed.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.720-729
• /
• 1996

An analysis of convective boiling heat transfer for refrigerant mixtures is performed for an annular flow to investigate the degradation of the heat transfer rate. Annular flow is selected in this study because a great portion of the evaporator in the refrigeration and air conditioning system is known to be in the annular flow regime. Mass transfer effect due to composition difference between liquid and vapor is included in this analysis, which is considered to be one of driving forces for the mass transfer at the interface. Due to the concentration gradient at the interface the mass transfer is interfered, so is the evaporative heat transfer at the interface. The mass transfer resistance makes the interface temperature slightly higher and, as a result, the heat transfer coefficients decrease compared with those without mass transfer effects. The degradatioin of the heat transfer rate reaches its maximum at a certain composition. The composition difference between vapor core and vapor at the interface has a direct effect on the temperature difference between the vapor core and the interface and the degradation of the heat transfer rate. Correction factor $C_{F}$ for the mixture effects is added to the correlation for pure substances and the flow boiling heat transfer coefficients can be calculated using the modified equation.n.

• 한국식품영양학회지
• /
• 제14권4호
• /
• pp.311-316
• /
• 2001

This study was designed to investigate the effective ratio of healthy bread wish green tea powder. The weight. volume, and colon difference of bread with various contents of green tea powder were measured. And the picture of bread and the panel test were taken. To avoid the decrease of volume, the experiment was taken with active gluten. The weight to bread was increased and the volume was decreased significantly according to increase of green tea powder ratio. But, the volume of the group with active gluten(3%+ and 4%+) was higher than that of the group with green tea powder 2%. That is which the correction of the volute was taken by active gluten in green tea powder bread. In the result of panel test and volume measurement. addition of 3% green tea powder was appropriate, and the addition of active gluten corrected the decrease of volume. Therefore. using the green tea powder, the diversity of bread by functionality, nutritional composition. taste, color. flavor of green tea powder can be developed. This result will support the background the development of green tea bread of good quality.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.447-457
• /
• 2020

In this study, a simple two-dimensional shear deformation model is employed for buckling analysis of functionally graded (FG) plates. The proposed theory has a kinematic with integral terms which considers the influence of shear deformation without using "shear correction factors". The impact of varying material properties and volume fraction of the constituent on buckling response of the FG plate is examined and discussed. The benefit of this theory over other contributions is that a number of variables is reduced. The basic equations that consider the influence of transverse shear stresses are derived from the principle of virtual displacements. The analytical solutions are obtained utilizing the "Navier method". The accuracy of the proposed theory is proved by comparisons with the different solutions found in the literature.