• 한국지반공학회논문집
• /
• 제26권11호
• /
• pp.29-38
• /
• 2010

강관합성말뚝은 외부 강관의 합성 구속효과에 의해 말뚝강도가 커지고, 연성파괴 거동이 발생한다. 본 연구에서는 해상 지반에 근입된 무리말뚝에 대하여 말뚝재료의 항복거동 및 지반의 탄소성 거동을 함께 고려할 수 있는 3차원 수치해석을 수행하여 하중-변위 거동 및 강관합성말뚝의 보강효과를 분석하였다. 이를 위하여 강관, 콘크리트, 강관합성말뚝에 대하여 각각 말뚝간격, 말뚝직경 그리고 재하방향을 달리한 변수연구를 수행하였다. 그 결과 수직방향지지력의 경우 강관합성말뚝은 강관말뚝과 비교하여 평균 90% 큰 것으로 나타났고, 콘크리트 말뚝에 대하여는 평균적으로 동일하게 나타났다. 그러고 허용변위 기준에서의 수평방향 지지력의 경우 강관합성말뚝은 강관말뚝보다 평균 50%, 콘크리트 말뚝보다 평균 22% 더 큰 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.553-558
• /
• 2010

The behavior of composite piles composed of steel pipe pile in the upper part and concrete pile in the lower part by a mechanical splicing joint was examined by field lateral load tests and bending tests. A total of 7 piles including two instrumented piles for bending test were installed. The soil profile consists of soft clay with weak silt with shallow groundwater level. Laboratory tests were carried out to determine the basic soil characteristics and the strength parameters. This paper presents the composite pile behavior with various portions of the upper steel pile: 0, 20, 30, and 45% of the pile embedded pile length. Three-point bending tests were performed to investigate the stress-strain relation at the mechanical joint. Based on these test results, the behavior of composite piles with various upper steel pile length are evaluated and the stability of mechanical joints are examined. Through comparisons with results of field load tests, it was found that lateral load carrying capacity of the composite piles increased and deflections of the composite piles decreased with increasing the upper steel piles. The mechanical joint was proved to retain its structural stability against the tested load conditions. Economical benefits of composite pile of this kind can be gained by setting adequately the length of the upper steel pipe piles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.729-737
• /
• 2008

As increasing demand on marine structures and skyscrapers, a deep shaft pile foundation is more to be used for the place having weak ground strength. Because heavy horizontal force is generally applied on upper part of pile foundation used in civil or architectural construction, steel pile is largely used with its high resistance to shear force and bending moment, and its capability to carry heavy loads. The steel pile has advantage in good constructibility, high applicability on site and easy handing, but has disadvantage in cost, more expensive than other material pile. This study is about the Composite pile that makes economical construction possible by reducing material cost of pile; using steel and PHC pile simultaneously while preserving the advantage of steel pile that large resistance to horizontal force and bending moment. A Non Welding connection method is applied to this composite pile and this method could reduce the cost and period of construction and could increase the quality of construction by solving the problem of current welding method and by improving the workability of pile connection. In this study, characteristics of driveability of non welding composite pile is analyzed prior to main project while the purpose of main project is proving the applicability of Non Welding Composite Pile by conducting various kind of loading test to analyze the characteristics behaviour of Non Welding Composit Pile and by verifying stability of non welding connection pile.

• 대한토목학회논문집
• /
• 제29권6C호
• /
• pp.267-275
• /
• 2009

강관합성말뚝은 외부 강관의 합성 구속효과에 의해 말뚝강도가 커지고, 연성파괴 거동이 발생한다. 본 연구에서는 해상 지반에 근입된 말뚝에 대하여 말뚝재료의 항복거동 및 지반의 탄소성 거동을 함께 고려할 수 있는 3차원 수치해석을 수행하여 하중-변위 거동 및 강관합성말뚝의 보강효과를 분석하였다. 이를 위하여 강관, 콘크리트, 강관합성말뚝에 대하여 각각 말뚝직경과 재하방향에 따른 변수연구를 수행하였다. 그 결과, 수직방향 극한지지력의 경우 강관합성말뚝은 강관말뚝과 비교하여 평균 1.90배, 콘크리트 말뚝에 대하여는 평균적으로 동일한 지지력을 보여주었다. 허용변위 기준에서의 수평방향 지지력의 경우 강관합성말뚝은 강관말뚝에 비하여 평균 1.46배, 콘크리트 말뚝에 비하여 평균 1.25배 큰 것으로 나타났다. 그리고, 허용변위 기준에서의 강관합성말뚝의 말뚝두부 변위는 평균적으로 강관말뚝의 약 78%, 콘크리트 말뚝의 약 53%로 나타나 강관합성말뚝의 변위억제 효과가 큰 것으로 나타났다. 본 해석조건에서 강관합성말뚝의 수직방향 극한지지력 증가효과는 작았지만 수평방향 재하시의 강관합성말뚝의 변위억제 효과에 의해 현장타설말뚝의 경제적인 설계가 가능할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.753-763
• /
• 2021

Feasibility studies of a reinforced concrete (RC) deep pile foundation system with the compressed air energy storage (CAES) technology were conducted in previous studies. However, those studies showed some technical limitations in its serviceability and durability performances. To overcome such drawbacks of the conventional RC energy pile system, various steel-concrete composite pile foundations are addressed in this study to be utilized as a dual functional system for an energy storage medium and load-resistant foundation. This study conducts finite element analyses to examine the applicability of various composite energy pile foundation systems considering the combined effects of structural loading, soil boundary forces, and internal air pressures induced by the thermos-dynamic cycle of compressed air. On this basis, it was clearly confirmed that the role of inner and outer tubes is essential in terms of reliable storage tank and better constructability of pile, respectively, and the steel tubes in the composite pile foundation can also ensure improved serviceability and durability performances compared to the conventional RC pile system.

• Composites Research
• /
• 제26권1호
• /
• pp.66-71
• /
• 2013

말뚝은 상부구조물에 작용하는 하중을 지반에 전달하는 구조요소로서, 일반적으로 말뚝기초는 지중 또는 수면 아래 지중에 건설된다. 이러한 환경은 부식 또는 염해를 유발하여 말뚝에 손상을 야기한다. 지중 및 수중 구조요소인 말뚝이 손상될 경우, 손상에 따른 내구성을 평가하기 어려우며 추가적인 보수보강 및 유지관리 또한 어렵다. 이 연구에서는 말뚝기초의 내구성과 제작성을 개선하기 위하여 하이브리드 FRP-Concrete 합성말뚝(HCFFT)을 제안하였다. 제안된 HCFFT에 대한 유한요소해석과 실험을 실시하여, 이를 바탕으로 HCFFT의 최대하중 추정식을 제안하였다. 또한, 제안된 HCFFT의 제작과정에서의 문제점을 개선한 새로운 형태의 HCFFT의 형태를 제안하고, 유한요소해석을 실시하여 동일한 직경의 PHC 말뚝과 강관말뚝의 축방향 압축력을 HCFFT 말뚝의 축방향 압축력과 비교하여 HCFFT 말뚝의 장점을 확인하였다.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.341-352
• /
• 2023

Long-short pile composite foundations bear both vertical and horizontal loads in many engineering applications. This study used indoor model tests to determine the horizontal bearing mechanism of a composite foundation with long and short piles under horizontal loads. A custom experimental device was developed to prevent excessive eccentricity of the vertical loading device caused by the horizontal displacement. ABAQUS software was used to analyze the influence of the load size and cushion thickness on the horizontal bearing mechanism. The results reveal that a large vertical load leads to soil densification and increases the horizontal bearing capacity of the composite foundation. The magnitude of the horizontal displacement of the pile and the horizontal load borne by the pile are related to the piles' positions. Due to different pile lengths, the long piles exhibit long pile effects and experience bending deformation, whereas the short piles rotate around a point (0.2 L from the pile bottom) as the horizontal load increases. Selecting a larger cushion thickness significantly improves the horizontal load sharing capacity of the soil and reduces the horizontal displacement of the pile top.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.108-118
• /
• 2009

As increasing demand on marine structures and skyscrapers, a deep shaft pile is frequently to be used for the place having weak ground strength. Because heavy horizontal force is generally applied on upper part of pile foundation used in engineering field, steel pile is highly used due to its high resistance to shear force and bending moment, and its capability to carry heavy loads. The steel pile has advantage in good constructibility, high applicability on site and easy handing, but has disadvantage in cost, more expensive than other material pile. This study is to examine the composite pile that makes economical construction possible by reducing material cost of pile; using steel and PHC pile A non welding connection method is applied to this composite pile. This study had step of comparison with the result of numerical analysis after analyzing the result of field test. Numerical analysis is the process of analyzing lateral behavior of non welding composite pile. Moreover, detailed analysis was implemented in order to evaluate joint stability. As a result of the analysis, we could interpret that the stability of the connection part is ensured as seeing the smaller internal stress than approved internal stress. Based on this study, we analyzed lateral behavior of non welding composite pile, which ensured the stability of connection part.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.397-404
• /
• 2001

Sand pile is one of the widely used ground improvement methods. Sand pile improved ground will have composite ground effects, even though the primary purpose is the accelerated consolidation. However, the consolidation of sand pile improved ground as a composite ground is substantially under developed. This study investigate the effect of composite ground for relatively low volume displacement sand piles. Plate bearing tests and earth pressure cell measurements are performed. It turned out that the contribution of sand pile as a load bearing mechanism is not substantial. However the bearing capacity of the surrounding clayey soil is increased by sixty percent, and it cause the stiffness change during consolidation. Therefore it is expected that, the effect of increased stiffness of sand pile improved ground is influenced by change of ground stiffness.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1396-1404
• /
• 2012

복합말뚝은 서로 다른 재질을 사용하여 말뚝을 구성하는 말뚝으로 상부는 강관말뚝 하부는 콘크리트 말뚝으로 구성된 말뚝을 선 굴착 공법으로 시공하였다. 말뚝에는 7쌍의 변형률계와 경사계를 설치하여 말뚝의 수평재하시험 중 말뚝에 작용하는 응력과 변위를 측정하였다. 측정된 계측치는 여러 가지 이론적 공식을 이용하여 분석 비교하는 역 해석을 수행하였다. 분석결과 공식들로부터 예측한 말뚝에 작용하는 응력은 실제 측정된 값보다 크게 평가 되었으며, 말뚝상부에 응력이 크게 측정되다가 말뚝깊이에 따라 급격하게 감소하는 경향을 보였다. 측정된 응력은 모두 말뚝재질의 응력을 초과 하지 않아 복합말뚝의 설계개념을 검증할 수 있었다.