• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.327-334
• /
• 2019

The purpose of this paper is to investigate the hygrothermal effects on the behavior of reinforced-concrete beams strengthened by bonded composite laminate plates (${\theta}n/90m)s$. This work is based on a simple theoretical model to estimate the interfacial stresses developed between the concrete beam and the composite with taking into account the hygrothermal effect. Fibre orientation angle effects of number of $90^{\circ}$ layers and effects of plate thickness and length on the distributions of interfacial stress in the concrete beams reinforced with composite plates have also been studied.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.41-47
• /
• 2004

중심합성계획(central composite design: ccd)은 반응 표면이 곡면적인 특성을 나타낼때 반응 공간을 추정하기 위해 사용되는 실험계획이다. 반응공간이 2차 회귀모형으로 나타나는 경우에 반응곡면의 변화량을 알기 위해서는 변수의 수준이 3이상이 되어야하는데 ccd는 적은 횟수의 실험으로 곡면을 효과적으로 추정하기 위해 2$^{k}$ 요인실험에 추가적으로 중심점(central point)과 축점(axial point)을 표본점에 포함시키는 계획이다. 본 연구에서는 시뮬레이션 실험에서 반응변수가 2차 회귀모형으로 근사되는 경우에 cod를 이용하여 관심 성과치의 반응표면을 추정하고자 한다. 일반적인 실험에서와는 달리 시뮬레이션 실험에서는 두개의 표본점(인자 수준의 조합)에서 분석자가 공통 난수계열(common random number series)을 부여하여 시뮬레이션 시스템 요소의 변화과정을 유사하게 통제할 수 있다. 일반적으로 공통난수법(common random number method)에 의해 얻어지는 두 표본점에서의 반응변수는 서로 양의 상관관계를 가지며 대조 난수(antithetic random number)에 의한 두 반응변수는 음의 상관성을 가지는 것으로 알려졌다. 본 연구는 ccd의 표본점에 공통난수와 대조난수 법을 이용하여 회귀모형의 파라미터를 효과적으로 추정하는 방법을 조사하고 이를 (s, S) 재고관리 모형에 적용하여 그 효율성을 평가하고자 한다.

• Geomechanics and Engineering
• /
• 제18권5호
• /
• pp.555-566
• /
• 2019

The purpose of this paper is to investigate the thermal effects on the behaviour reinforced-concrete beams strengthened by bonded angle-ply laminated composites laminates plate $[{\pm}{\theta}n/90m]_S$. Effects of number of $90^{\circ}$ layers and number of ${\pm}{\theta}$ layers on the distributions of interfacial stress in concrete beams reinforced with composite plates have also been studied. The present results represent a simple theoretical model to estimate shear and normal stresses. The effects the temperature, mechanical properties of the fibre orientation angle of the outer layers, the number of cross-ply layers, plate length of the strengthened beam region and adhesive layer thickness on the interfacial shear and normal stresses are investigated and discussed.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.133-141
• /
• 2023

Based on the third-order shear deformation theory, the wave propagations in doubly curved spherical- and cylindrical- panels reinforced by carbon nanotubes (CNTs) are firstly investigated in present work. The coupled equations of wave propagation for the carbon nanotubes reinforced composite (CNTRC) doubly curved panels are established. Then, combined with the harmonic balance method, the eigenvalue technique is adopted to simulate the velocity-wave number curves of the CNTRC doubly curved panels. In the end, numerical results are showed to discuss the effects of the impact of key parameters including the volume fraction, different shell types (including spherical (R₁=R₂=R) and cylindrical (R₁=R, R₂=→∞)), wave number as well as modal number on the sensitivity of elastic waves propagating in CNTRC doubly curved shells.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.7-12
• /
• 2002

The object of this paper is to investigate collapse characteristics of CF/Epoxy(Carbon Fiber/Epoxy resin) composite tubes on the change of interlaminar number and fiber orientation angle of outer and to evaluate reappearance of collapse characteristics on the change of tension strength of fibers under static and impact axial compression loads. When a CF/Epoxy composite tube is mushed, static/impact energy is consumed by friction between the loading plate and the splayed fiends of the tube, by fracture of the fibers, matrix and their interface. In general, CF/Epoxy tube with 6 interlaminar number(C-type) absorbed more energy than other tubes(A, B, D-types). The maximum collapse load seemed to increase as the interlaminar number of such tubes increases. The collapse mode depended upon orientation angle of outer of CF/Epoxy tubes and loading status(static/impact). Typical collapse modes of CF/Epoxy tubes are wedge collapse mode, splaying collapse mode and fragmentation collapse mode. The wedge collapse mode was shorn in case of CF/Epoxy tubes with 0$^{\circ}$ orientation angle of outer under static and impact loadings. The splaying collapse mode was shown in only case of CF/Epoxy tubes with 90$^{\circ}$ orientation angie or outer under static loadings, however in impact tests those were collapsed in fragmentation mode. So that CF/Epoxy tube with 6 interlaminar number and 90$^{\circ}$ outer orientation angle presented to the optimal collapse characteristics.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.292-301
• /
• 2021

Interviews and boarding surveys were conducted in order to understand the actual usage of octopus pot in the coastal composite fishery in Jeollanam-do. According to the results of the interviews conduced by visiting the areas (Goheung, Yeosu and Wando), the number of octopus pots per nine-ton vessel were 30,000-80,000, and the number of daily usage pots were 7,000-10,000. The number of octopus pots per four-ton vessel was 40,000, and the number of daily usage pots were 4,000. As a result of the survey on two octopus pot fishing boats (9.77-ton and 4.99-ton) in Yeosu area, the daily catch weight of 9-ton class vessel was the minimum of 66.9 kg and the maximum of 159.6 kg. The daily catch weight of the four-ton class fishing vessel was from 31.3 kg to maximum 85.6 kg. The average number of octopus pot used per day in the nine-ton class vessel was 6,821 (the minimum of 6,031 and the maximum of 7,697) and 3,181 (the minimum of 2,282 and the maximum of 3,878) in the four-ton class vessel.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.69-84
• /
• 2017

Delamination is the most common failure mode in layered composite materials. The author have found that the electrical potential change (EPC) technique using response surfaces method is very effective in assessment delamination in basalt fiber reinforced polymer (FRP) laminate composite pipe by using electrical capacitance sensor (ECS). In the present study, the effect of the electrodes number on the method is investigated using FEM analyses for delamination location/size detection by ANSYS and MATLAB, which are combined to simulate sensor characteristic. Three cases of electrodes number are analyzed here are eight, twelve and sixteen electrodes, afterwards, the delamination is introduced into between the three layers [$0^{\circ}/90^{\circ}/0^{\circ}$]s laminates pipe, split into eight, twelve and sixteen scenarios for cases of eight, twelve and sixteen electrodes respectively. Response surfaces are adopted as a tool for solving inverse problems to estimate delamination location/size from the measured EPC of all segments between electrodes. As a result, it was revealed that the estimation performances of delamination location/size depends on the electrodes number. For ECS, the high number of electrodes is required to obtain high estimation performances of delamination location/size. The illustrated results are in excellent agreement with solutions available in the literature, thus validating the accuracy and reliability of the proposed technique.

• Earthquakes and Structures
• /
• 제7권2호
• /
• pp.179-199
• /
• 2014

The steel tube-reinforced concrete (ST-RC) composite column is a novel type of composite column, consisting of a steel tube embedded in reinforced concrete. The objective of this paper is to investigate the effect of cumulative damage on the seismic behavior of ST-RC columns through experimental testing. Six large-scale ST-RC column specimens were subjected to high axial forces and cyclic lateral loading. The specimens included two groups, where Group I had a higher amount of transverse reinforcement than Group II. The test results indicate that all specimens failed in a flexural mode, characterized by buckling and yielding of longitudinal rebars, failure of transverse rebars, compressive crushing of concrete, and steel tube buckling at the base of the columns. The number of loading cycles was found to have minimal effect on the strength capacity of the specimens. The number of loading cycles had limited effect on the deformation capacity for the Group I specimens, while an obvious effect on the deformation capacity for the Group II specimens was observed. The Group I specimen showed significantly larger deformation and energy dissipation capacities than the corresponding Group II specimen, for the case where the lateral cyclic loads were repeated ten cycles at each drift level. The ultimate displacement of the Group I specimen was 25% larger than that of the Group II counterpart, and the cumulative energy dissipated by the former was 2.8 times that of the latter. Based on the test results, recommendations are made for the amount of transverse reinforcement required in seismic design of ST-RC columns for ensuring adequate deformation capacity.

• 멤브레인
• /
• 제27권3호
• /
• pp.284-289
• /
• 2017

본 연구에서는 복합막의 물성향상을 위해 clay를 도입한 polysulfone 나노섬유 복합막을 제조하였다. Polysulfone/clay 복합막은 clay가 들어간 N,N-dimethyl acetamide와 acetone 혼합용매에 polysulfone을 첨가한 후 전기방사법을 이용하여 제조하였으며, 제조된 나노섬유 복합막은 적층수를 변화해 기공크기를 조절한 후 사용하였다. 전반적인 분리막의 특성은 SEM, contact angle, 기공특성, tensile strength, water flux 분석을 사용하여 고찰하였다. 특히 SEM image로 clay의 도입을 확인하였으며 contact angle 측정을 통해 표면이 개질된 결과를 확인할 수 있었다. 그리고 clay의 도입량에 따른 복합막의 기계적 물성을 확인하였다. 따라서 본 연구에서 제조된 분리막은 수처리용 분리막으로 충분히 활용 가능할 것으로 판단된다.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.61-75
• /
• 2009

The effect of porous matrix on thermal fatigue behavior of 3D-orthogonally woven SiC/SiC composite was evaluated in comparison with that having relatively dense matrix. The porous matrix yields open air passages through its thickness which can be utilized for transpiration cooling. On the other hand, the latter matrix is so dense that the air passages are sealed. A quantity of the matrix was varied by changing the number of repetition cycles of the polymer impregnation pyrolysis (PIP). Strength degradation of composites under thermal cycling conditions was evaluated by the $1200^{\circ}C$/RT thermal cycles with a combination of burner heating and air cooling for 200 cycles. It was found that the SiC/SiC composite with the porous matrix revealed little degradation in strength during the thermal cycles, while the other sample showed a 25% decrease in strength. Finally it was demonstrated that the porous structure in 3D-SiC/SiC composite improved the thermal fatigue durability.