Browse > Article
http://dx.doi.org/10.12989/gae.2019.18.5.555

Influence of temperature on the beams behavior strengthened by bonded composite plates  

Bouazza, Mokhtar (Department of Civil Engineering, University of Tahri Mohamed of Bechar)
Antar, Kamel (Laboratory of Materials and Hydrology, University of Sidi Bel Abbes)
Amara, Khaled (Laboratory of Materials and Hydrology, University of Sidi Bel Abbes)
Benyoucef, Samir (Laboratory of Materials and Hydrology, University of Sidi Bel Abbes)
Bedia, El Abbes Adda (Centre of Excellence for Advanced Materials Research, King Abdulaziz University)
Publication Information
Geomechanics and Engineering / v.18, no.5, 2019 , pp. 555-566 More about this Journal
Abstract
The purpose of this paper is to investigate the thermal effects on the behaviour reinforced-concrete beams strengthened by bonded angle-ply laminated composites laminates plate $[{\pm}{\theta}n/90m]_S$. Effects of number of $90^{\circ}$ layers and number of ${\pm}{\theta}$ layers on the distributions of interfacial stress in concrete beams reinforced with composite plates have also been studied. The present results represent a simple theoretical model to estimate shear and normal stresses. The effects the temperature, mechanical properties of the fibre orientation angle of the outer layers, the number of cross-ply layers, plate length of the strengthened beam region and adhesive layer thickness on the interfacial shear and normal stresses are investigated and discussed.
Keywords
interfacial stresses; concrete beam; angle-ply laminates; fibre angle;
Citations & Related Records
Times Cited By KSCI : 23  (Citation Analysis)
연도 인용수 순위
1 Zamanian, M., Kolahchi, R. and Bidgoli, M.R. (2017), "Agglomeration effects on the buckling behaviour of embedded concrete columns reinforced with SiO2 nano-particles", Wind Struct., 24(1), 43-57. https://doi.org/10.12989/was.2017.24.1.043.   DOI
2 Zarei, M.S., Kolahchi, R., Hajmohamm, M.H. and Maleki, M. (2017), "Seismic response of underwater fluid-conveying concrete pipes reinforced with SiO2 nanoparticles and fiber reinforced polymer (FRP) layer", Soil Dyn. Earthq. Eng., 103, 76-85. https://doi.org/10.1016/j.soildyn.2017.09.009.   DOI
3 Zhang, F., Lu, Y., Li, S. and Zhang, W. (2018), "Eccentrically compressive behaviour of RC square short columns reinforced with a new composite method", Steel Compos. Struct., 27(1), 95-108. https://doi.org/10.12989/scs.2018.27.1.095.   DOI
4 D'Ambrisi, A., Mezzi, M., Feo, L. and Berardi, V.P. (2014) "Analysis of masonry structures strengthened with polymeric net reinforced cementitious matrix materials", Compos. Struct., 113, 264-271. https://doi.org/10.1016/j.compstruct.2014.03.032.   DOI
5 Forquin, P. and Hild, F. (2008), "Dynamic fragmentation of an ultra-high strength concrete during edge-on impact tests", J. Eng. Mech., 134(4), 302-315. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:4(302).   DOI
6 Daskiran, E.G., Daskiran, M.M. and Gencoglu, M. (2016), "Development of fine grained concretes for textile reinforced cementitious composites", Comput. Concrete, 18 (2), 297-295. http://dx.doi.org/10.12989/cac.2016.18.2.279.   DOI
7 Ellali, M., Amara, K., Bouazza, M. and Bourada, F. (2018), "The buckling of piezoelectric plates on Pasternak elastic foundation using higher-order shear deformation plate theories", Smart Struct. Syst., 21(1), 113-122. https://doi.org/10.12989/sss.2018.21.1.113.   DOI
8 Fakhar, A. and Kolahchi, R. (2018), "Dynamic buckling of magnetorheological fluid integrated by viscopiezo-GPL reinforced plates", Int. J. Mech. Sci., 144, 788-799. https://doi.org/10.1016/j.ijmecsci.2018.06.036.   DOI
9 Fragiacomo, M. (2005), "A finite element model for long-term analysis of timber-concrete composite beams", Struct. Eng. Mech., 20(2), 173-189. https://doi.org/10.12989/sem.2005.20.2.173.   DOI
10 Golabchi, H., Kolahchi, R. and Bidgoli, M.R. (2018), "Vibration and instability analysis of pipes reinforced by SiO2 nanoparticles considering agglomeration effects", Comput. Concrete, 21(4), 431-440. https://doi.org/10.12989/cac.2018.21.4.431.   DOI
11 Hajmohammad, M.H., Farrokhian, A. and Kolahchi, R. (2018a), "Smart control and vibration of viscoelastic actuator-multiphase nanocomposite conical shells-sensor considering hygrothermal load based on layerwise theory", Aerosp. Sci. Technol., 78, 260-270. https://doi.org/10.1016/j.ast.2018.04.030.   DOI
12 Hajmohammada, M.H., Kolahchi, R., Sharif Zarei, M., Nouri AH (2019), "Dynamic response of auxetic honeycomb plates integrated with agglomerated CNT-reinforced face sheets subjected to blast load based on visco-sinusoidal theory", Int. J. Mech. Sci., 153 391-401. https://doi.org/10.1016/j.ijmecsci.2019.02.008.   DOI
13 Hajmohammad, M.H., Kolahchi, R., Zarei, M.S. and Maleki, M. (2018c), "Earthquake induced dynamic deflection of submerged viscoelastic cylindrical shell reinforced by agglomerated CNTs considering thermal and moisture effects", Compos. Struct., 187, 498-508. https://doi.org/10.1016/j.compstruct.2017.12.004.   DOI
14 Hajmohammad, M.H., Maleki, M. and Kolahchi, R. (2018b), "Seismic response of underwater concrete pipes conveying fluid covered with nano-fiber reinforced polymer layer", Soil Dyn. Earthq. Eng., 110, 18-27. https://doi.org/10.1016/j.soildyn.2018.04.002.   DOI
15 Hajmohammad, M.H., Zarei, M.S., Nouri, A. and Kolahchi, R. (2017), "Dynamic buckling of sensor/functionally graded-carbon nanotube-reinforced laminated plates/actuator based on sinusoidalvisco-piezoelasticity theories", J. Sandw. Struct. Mater., 1099636217720373. https://doi.org/10.1177%2F1099636217720373.
16 Hebali, H., Bakora, A., Tounsi, A. and Kaci, A. (2016), "A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates", Steel Compos. Struct., 22(3), 473-495. https://doi.org/10.12989/scs.2016.22.3.473.   DOI
17 Herakovich, C.T. (1998), Mechanics of Fibrous Composites, Wiley, U.S.A.
18 Hoque, M., Rattanawangcharoen, N., Shah, A.H. and Desai, Y.M. (2007), "3D nonlinear mixed finite-element analysis of RC beams and plates with and without FRP reinforcement", Comput. Concrete, 4(2), 135-156. http://dx.doi.org/10.12989/cac.2007.4.2.135.   DOI
19 Hu, J., Liang, H. and Lu, Y. (2018), "Behavior of steel-concrete jacketed corrosion-damaged RC columns subjected to eccentric load", Steel Compos. Struct., 29(6), 689-701. https://doi.org/10.12989/scs.2018.29.6.689.   DOI
20 Hosseini, H. and Kolahchi, R. (2018), "Seismic response of functionally graded-carbon nanotubesreinforced submerged viscoelastic cylindrical shell in hygrothermal environment", Phys. E Low-Dimens. Syst. Nanostruct., 102, 101-109. https://doi.org/10.1016/j.physe.2018.04.037.   DOI
21 Huang, J., Huang, P.X. and Zheng, X. (2015), "Experimental study of prestress losses of RC beams strengthened with prestress FRP", J. Build. Struct., 36(1), 85-91.
22 Jassas, M.R., Bidgoli, M.R. and Kolahchi R.(2019), "Forced vibration analysis of concrete slabs reinforced by agglomerated SiO2 nanoparticles based on numerical methods", Construct. Build. Mater., 211, 796-806. https://doi.org/10.1016/j.conbuildmat.2019.03.263.   DOI
23 Kara, I.K. and Dundar, C. (2012), "Prediction of deflection of high strength steel fiber reinforced concrete beams and columns", Comput. Concrete, 9(2), 133-151. http://dx.doi.org/10.12989/cac.2012.9.2.133/   DOI
24 Khetir, H., Bouiadjra, M.B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2017), "A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates", Struct. Eng. Mech., 64(4), 391-402. https://doi.org/10.12989/sem.2017.64.4.391.   DOI
25 Kolahchi, R. (2017), "A comparative study on the bending, vibration and buckling of viscoelastic sandwich nano-plates based on different nonlocal theories using DC, HDQ and DQ methods", Aerosp. Sci. Technol., 66, 235-248. https://doi.org/10.1016/j.ast.2017.03.016.   DOI
26 Kolahchi, R. and Bidgoli, A.M. (2016), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8.   DOI
27 Roberts, T.M. (2001), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", J. Struct. Eng., 10(2), 229-233
28 Abdel-Kareem, A.H. (2014), "Shear strengthening of reinforced concrete beams with rectangular web openings by FRP composites", Adv. Concrete Construct., 2(4),281-300. http://dx.doi.org/10.12989/acc.2014.2.4.281/.   DOI
29 Abdelmalek, A., Bouazza, M., Zidour, M. and Benseddiq, N. (2019), "Hygrothermal effects on the free vibration behavior of composite plate using nth-order shear deformation theory: A micromechanical approach", Iran J. Sci. Technol. Trans. Mech. Eng., 43(1), 61-73. https://doi.org/10.1007/s40997-017-0140-y.   DOI
30 Ait Amar. M, Abdelaziz, H.H. and Tounsi. A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. https://doi.org/10.1177%2F1099636214526852.   DOI
31 Roberts, T.M. and Hajikazemi, H. (1989), "Theoretical study of the behaviour of reinforced concrete beams strengthened by externally bonded steel plates", Proc. Inst. Civ. Eng., 87(2), 39-55. https://doi.org/10.1680/iicep.1989.1452.
32 Kolahchi, R., Keshtegar, B. and Fakhar, M.H. (2017c), "Optimization of dynamic buckling for sandwich nanocomposite plates with sensor and actuator layer based on sinusoidal-visco-piezoelasticity theories using Grey Wolf algorithm", J. Sandw. Struct. Mater., 1099636217731071. https://doi.org/10.1177%2F1099636217731071.
33 Amnieh, H.B., Zamzam, M.S. and Kolahchi, R. (2018), "Dynamic analysis of non homogeneous concrete blocks mixed by SiO2 nanoparticles subjected to blast load experimentally and theoretically", Constr. Build. Mater., 174, 633-644. https://doi.org/10.1016/j.conbuildmat.2018.04.140.   DOI
34 Arani, A.J. and Kolahchi, R. (2016), "Buckling analysis of embedded concrete columns armed with carbon nanotubes", Comput. Concrete, 17(5), 567-578. http://dx.doi.org/10.12989/cac.2016.17.5.567.   DOI
35 Azmi, M., Kolahchi, R. and Bidgoli, M.R. (2019), "Dynamic analysis of concrete column reinforced with Sio2 nanoparticles subjected to blast load", Adv. Concrete Construct., 7(1), 51-63. https://doi.org/10.12989/acc.2019.7.1.051.   DOI
36 Kolahchi, R. and Cheraghbak, A. (2017), "Agglomeration effects on the dynamic buckling of viscoelastic microplates reinforced with SWCNTs using Bolotin method", Nonlin. Dyn., 90(1), 479-492. https://doi.org/10.1007/s11071-017-3676-x.   DOI
37 Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016a), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocalpiezoelasticity theories", Compos. Struct., 157, 174-186. https://doi.org/10.1016/j.compstruct.2016.08.032.   DOI
38 Kolahchi, R., Safari, M. and Esmailpour, M. (2016b), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023.   DOI
39 Kolahchi, R., Zarei, M.S., Hajmohammad, M.H. and Nouri, A. (2017b), "Wave propagation of embedded viscoelastic FG-CNT-reinforced sandwich plates integrated with sensor and actuator based on refined zigzag theory", Int. J. Mech. Sci., 130, 534-545. https://doi.org/10.1016/j.ijmecsci.2017.06.039.   DOI
40 Kolahchi, R., Zarei, M.S., Hajmohammad, M.H. and Oskouei, A.N. (2017a), "Visco-nonlocal-refined Zigzag theories for dynamic buckling of laminated nanoplates using differential cubature-Bolotin methods", Thin-Wall. Struct., 113, 162-169. https://doi.org/10.1016/j.tws.2017.01.016.   DOI
41 Taljsten, B. (1997), "Strengthening of beams by plate bonding", J. Mater. Civ. Eng., 9(4), 206-212. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(206).   DOI
42 Schmit, K. (1998), Fiberglass Reinforced Plastic (FRP) Piping Systems Designing Process / Facilities Piping Systems with FRP a Comparison to Traditional Metallic Materials, Project Engineer Specialty Plastics, Inc., Baton Rouge, Los Angeles, California, U.S.A.
43 Siu, W.H. and Su, R.K.L. (2011), "Analysis of side-plated reinforced concrete beams with partial interaction", Comput. Concrete, 8(1), 71-96. https://doi.org/10.12989/cac.2011.8.1.071.   DOI
44 Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23(7), 857-871. https://doi.org/10.1016/S0141-0296(00)00090-0.   DOI
45 Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2001), "FRP strengthened RC structures", Front. Phys.
46 Tounsi, A. (2006), "Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate", Int. J. Solids Struct., 43(14-15), 4154-4174. https://doi.org/10.1016/j.ijsolstr.2005.03.074.   DOI
47 Rad, S.S. and Bidgoli, MR (2017), "Earthquake analysis of NFRP-reinforced- concrete beams using hyperbolic shear deformation theory", Earthq. Struct., 13(3), 241-253. https://doi.org/10.12989/eas.2017.13.3.241.   DOI
48 Berardi, V.P., Feo, L., Mancusi, G. and De Piano, M. (2018), "Influence of reinforcement viscous properties on reliability of existing structures strengthened with externally bonded composites", Compos. Struct., 200, 532-539. https://doi.org/10.1016/j.compstruct.2018.05.111.   DOI
49 Becheri, T., Amara, K., Bouazza, M. and Benseddiq, N. (2016), "Buckling of symmetrically laminated plates using nth-order shear deformation theory with curvature effects", Steel Compos. Struct., 21(6), 1347-1368. https://doi.org/10.12989/scs.2016.21.6.1347.   DOI
50 Berardi, V.P., Perrella, M., Feo, L. and Cricri, G. (2017), "Creep behavior of GFRP laminates and their phases: Experimental investigation and analytical modeling", Compos. B Eng., 122, 136-144. https://doi.org/10.1016/j.compositesb.2017.04.015.   DOI
51 Berardi, V.P., Perrella, M. and Cricri, G. (2019), "Cohesive fracture in composite systems: experimental setup and first results", Frattura ed Integrita Strutturale, 48, 222-229. https://doi.org/10.3221/IGF-ESIS.48.23.
52 Bilouei, B.S., Kolahchi, R. and Bidgoli, M.R. (2016), "Buckling of concrete columns retrofitted with Nano-Fiber Reinforced Polymer (NFRP)", Comput. Concrete, 18(5), 1053-1063. https://doi.org/10.12989/cac.2016.18.5.1053.   DOI
53 Bouhadra, A., Tounsi, A., Bousahla, A.A., Benyoucef, S. and Mahmoud, S.R. (2018), "Improved HSDT accounting for effect of thickness stretching in advanced composite plates", Struct. Eng. Mech., 66(1), 61-73. https://doi.org/10.12989/sem.2018.66.1.061.   DOI
54 Madani, H., Hosseini, H. and Shokravi, M. (2016), "Differential cubature method for vibration analysis of embedded FG-CNT-reinforced piezoelectric cylindrical shells subjected to uniform and non-uniform temperature distributions", Steel Compos. Struct., 22(4), 889-913. https://doi.org/10.12989/scs.2016.22.4.889.   DOI
55 Bouazza, M., Lairedj, A., Benseddiq, N. and Khalki, S. (2016), "A refined hyperbolic shear deformation theory for thermal buckling analysis of cross-ply laminated plates", Mech. Res. Commun., 73, 117-126. https://doi.org/10.1016/j.mechrescom.2016.02.015.   DOI
56 Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of RC beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
57 Moscoso, A.M., Tamayo, J.L. and Morsch, I.B. (2017), "Numerical simulation of external pre-stressed steel-concrete composite beams", Comput. Concrete, 19(2), 191-201. https://doi.org/10.12989/cac.2017.19.2.191.   DOI
58 Narayanamurthy, V., Chen, J.F. and Cairns, J. (2010), "A general analytical method for the analysis of in terfacial stresses in plated beams under arbitrary loading", Adv. Struct. Eng., 13(5), 975-988. https://doi.org/10.1260%2F1369-4332.13.5.975.   DOI
59 Narayanamurthy, V., Chen, J.F. and Cairns, J. (2016), "Improved model for interfacial stresses accounting for the effect of shear deformation in plated beams", Int. J. Adhes. Adhes., 64, 33-47. https://doi.org/10.1016/j.ijadhadh.2015.10.001.   DOI
60 Younsi, A., Tounsi, A., Zaoui, F.Z., Bousahla, A.A. and Mahmoud, S.R. (2018), "Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates", Geomech. Eng., 14(6), 519-532. https://doi.org/10.12989/gae.2018.14.6.519.   DOI
61 Bousahla, A.A., Benyoucef, S. Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335. https://doi.org/10.12989/sem.2016.60.2.313.   DOI
62 Carvalho, U.T.F. and Campilho, R.D.S.G. (2017), "Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints", Int. J. Adhes. Adhes., 77, 41-50. https://doi.org/10.1016/j.ijadhadh.2017.04.002.   DOI
63 Chen, P., Chen, S., Guo, W. and Gao, F. (2018), "The interface behavior of a thin piezoelectric film bonded to a graded substrate", Mech. Mater., 127, 26-38. https://doi.org/10.1016/j.mechmat.2018.08.009.   DOI
64 Chen, P., Guo, W., Zhao, Y., Li, E., Yang, Y. and Liu, H. (2019), "Numerical analysis of the strength and interfacial properties of adhesive joints with graded adherends", Int. J. Adhes. Adhes., 90, 88-96. https://doi.org/10.1016/j.ijadhadh.2019.02.003.   DOI
65 Chen, P., Peng, J., Liu, H., Gao, F. and Guo, W. (2018), "The electromechanical behavior of a piezoelectric actuator bonded to a graded substrate including an adhesive layer", Mech. Mater., 123, 77-87. https://doi.org/10.1016/j.mechmat.2018.05.002.   DOI
66 Civalek, O. and Yavas, A. (2008), "Discrete singular convolution for buckling analyses of plates and columns", Struct. Eng. Mech., 29(3)., 279-288. https://doi.org/10.12989/sem.2008.29.3.279.   DOI
67 Qiao, P. and Chen, F. (2008), "An improved adhesively bonded bimaterial beam model for plated beams", Eng. Struct., 30(7), 1949-1957. https://doi.org/10.1016/j.engstruct.2007.12.017.   DOI
68 Narayanamurthy, V., Chen, J.F., Cairns, J. and Ramaswamy, A. (2011), "Effect of shear deformationon interfacial stresses of plated beams subjected to arbitrary loading", Int. J. Adhes., Adhes., 31(8), 862-874. https://doi.org/10.1016/j.ijadhadh.2011.08.007.   DOI
69 Oehlers, D.J., Nguyen, N.T., Ahmed, M. and Bradford, M.A. (1997), "Transverse and longitudinal partial interaction in composite bolted side-plated reinforced-concrete beams", Struct. Eng. Mech,, 5(5), 553-563. https://doi.org/10.12989/sem.1997.5.5.553.   DOI
70 Perrella, M., Berardi, V.P. and Cricri, G. (2018), "A novel methodology for shear cohesive law identification of bonded reinforcements", Compos. Part B Eng., 144, 126-133. https://doi.org/10.1016/j.compositesb.2018.02.027.   DOI