• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.462-467
• /
• 2014

In this paper, we studied the magnetic composite sheets for electromagnetic wave noise absorber of quasi-microwave band by using soft magnetic FeSiCr and Fe50Ni flakes with the thickness of about $1{\mu}m$ and polymer. The magnetic hysteresis curve including saturation magnetization and residual magnetization and the complex permeability characteristics of the composite sheets were investigated to clarify the mixing effect on electromagnetic wave absorption properties. The saturation magnetization was decreased about 10% while the residual magnetization was increased about 15% and the real parts of complex permeability at below 500 MHz were increased 0.6~4 while those values at above 500 MHz were decreased 0.4~2.5 according to the change of contents of FeSiCr and Fe50Ni powders. As a result, the reflection loss can be moved to the lower frequency from 2~3 GHz to 1~1.5 GHz as the contents of Fe50Ni flaky powder into FeSiCr flaky powder was increased up to 50%.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.175-179
• /
• 2004

Since the electromagnetic properties of fiber reinforced polymeric composites can be tailored effectively by adding small amount of electromagnetic powders to the matrix of composites, they are plausible materials for fabricating the radar absorbing structures (RAS) of desired performance. In order to design the effective electromagnetic wave (EM) absorber with the fiber reinforced polymeric composites, the electromagnetic characteristics with respect to the constituents of the composite should be available in the target frequency band. In order to describe the dielectric behavior of low loss unidirectional fiber reinforced composite, theoretical models and mixture equations for estimating its dielectric constant were proposed with respect to the fiber, matrix volume fractions and fiber orientations, and verified by the experiments. From the investigation, it was found that the suggested binary mixture rules agreed well with the experimental results.

• 한국자기학회지
• /
• 제23권3호
• /
• pp.83-88
• /
• 2013

두께 1 ${\mu}m$ 정도의 연자성 Fe-Si-Cr 합금 박편을 편상화 가공을 실시한 그대로 및 500과 $700^{\circ}C$에서 1시간 어닐링한 후 이를 폴리머 중에 분산시켜 준마이크로파 대역의 전자파 노이즈 억제용 복합 시트를 제조하여, 자성 합금의 열처리가 전자파 전송 손실(전력 손실)에 미치는 영향을 조사하였다. 합금 분말을 어닐링하지 않은 것이 어닐링한 분말을 사용한 경우보다 수 GHz의 주파수 대역에서 전력 손실의 크기가 증가하였다. 이 때 복소 투자율의 허수항 크기도 어닐링을 하지 않았을 때 더 큰 값을 나타내었는바 편상화 가공 상태의 자성 분말을 사용한 복합 시트가 우수한 전자파 노이즈 흡수 특성을 가지며, 이에는 그의 높은 복소 투자율의 허수항 크기가 기여하고 있는 것으로 판단되었다. 반면 편상화 시킨 합금 박편을 어닐링 한 경우에는 와전류 효과의 증대에 따라 복소 투자율이 낮아지고 따라서 전력 손실도 저하되는 것으로 생각되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2004

고성능 복합형 전자파 흡수체를 개발하기 위해 종래에는 지지재로서 주로 Silicone 고무나 CPE가 사용되어왔다. 본 연구에서는 전통 공예에서 사용되어 오던 옻에 대한 특징을 분석하고 옻의 전자파 흡수능을 조사하고 이를 지지재로 사용하여 MnZn 페라이트와 배합하여 전자파 흡수체를 제작한 경우의 전자파 흡수능을 조사하고, 흡수체의 두께에 따른 흡수능을 조사하였다. 옻을 지지재로 한 MnZn 페라이트 복합형 전자파 흡수체는 CPE나 Silicone 고무를 지지재로 한 전자파 흡수체에 비하여 우수한 전파흡수특성 나타내었으며, 옻을 지지재로 사용한 전파흡수체의 두께 변화에 따라 정합주파수와 전파흡수능이 변화함을 알았다.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.228-234
• /
• 2005

준 마이크로파 대역용 전자파 노이즈의 흡수체로서 자성 복합 시트를 개발하였다. Fe-Si-Al 자성 분말을 attrition mill을 이용해 편상화한 후 이것을 polymer와 혼합 분산시켜 전자파의 입사 방향에 수직한 방향으로 배향된 자성 복합 시트를 제조하였다. Attrition milling 시간이 긴 편상 분말일수록 제조된 자성 복합체의 유전율은 증가하나 투자율은 다소 감소하는 경향을 보인다. 또한 오랜 시간 milling한 편상 분말일수록 임피던스 정합 주파수는 저주파 쪽으로 이동하나 정합 주파수에서의 전자파 흡수율은 감소한다. 이러한 결과들로부터 복합 자성체의 유전율과 투자율의 주파수 특성을 제어하여 1.4 GHz에서 -8.2 dB의 반사 손실 특성을 갖는 두께 1.0 mm의 노이즈 흡수 시트를 개발하였다.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1329-1334
• /
• 2003

폐 처리된 Ba 페라이트를 사용하여 GHz 대역용 전파흡수체를 개발하였다. 도전 손실재인 카본의 첨가에 따른 전파흡수능의 변화와 시편 제작시 제작온도 변화에 따른 전파흡수능의 변화를 조사하였다. 이와 같은 실험을 통하여 GHz 대역용 Ba 페라이트 전파흡수체를 개발하는데 있어 카본의 첨가가 매우 유효함을 알았으며, 시편의 제작온도 또한 우수한 전파흡수체를 개발하는데 있어 반드시 고려되어야 함을 밝혔다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 1993

In this paper, the permeability(${\mu}$$\sub$r′/, ${\mu}$$\sub$r"/), permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) and absorption properties of Ferroxplana/Rubber composites were investigated. The composite specimens were prepared by molding and curing the mixtures of matrix rubber and Ni$_2$Y ferroxplana powders which were synthesized by coprecipitated method. The permeability(${\mu}$$\sub$r′/) of specimen was decreased in the range of 8∼12.5(GHz) and the permeability(${\mu}$$\sub$r"/) and Permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) were increased. The optimum thickness of electromagnetic wave absorber (F/R=4, 1,200($^{\circ}C$) ), utilizing the Smith chart, was about 3.0(mm). The Figure of Merit was 93(%).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.141-145
• /
• 2005

Since the electromagnetic properties of fiber reinforced polymeric laminate composite can be tailored effectively by adjusting its composition and regulating the stacking sequence, it is plausible material for fabricating the radar absorbing structures (RAS) of desired performance. In order to design the effective electromagnetic wave (EM) absorber with the fiber reinforced polymeric laminate composite, its electromagnetic characteristics should be available and could be regulated easily in the target frequency bands. In this study, dielectric characteristics of the E-glass/epoxy laminate composites were measured by the free space method in the X-band frequency range ($8.2\;{\sim}\;12.4\;GHz$). In order to describe the dielectric behavior of laminate composites of arbitrary stacking sequences, the equivalent circuit model and the laminating equations for estimating dielectric properties were proposed, and experimentally verified. From the comparison of the predicted and measured data, the proposed method predicted well the experimentally measured data.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.843-850
• /
• 1991

There is a growing demend for absorptive electromagentic shielding materials for wide band frequency application. In this study, the absorber which consists of a rubber plus Ni-Zn ferrite which have been prepared by direct-wet method. A rubber ferrite composite for electromagnetic shielding, it is most importan facter the homogeneous ultra fine size and high dispersitive ferrite powder. Direct-wet method and solid-solid reaction method for preparing of ultra fine ferrite powder was used. It has been experimentally verified that the powder which prepared by direct-wet method was very fine and almost same size spherical powder, the composite ferrite have excellent electromagnetic wave absorption in X-band.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.