• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.237.3-238
• /
• 2003

Tissue engineering may be adequately defined as the science of persuading the body to regenerate or repair tissue that fail to regenerate or heal spontaneously. In the various techniques of cartilage tissue engineering, the use of 3-dimensional polymeric scaffolds implanted at a tissue defect site is usually involved. These scaffolds provided a framework for cells to attach, proliferate, and form extracellular matrix(ECM). The scaffolds may also serve as carriers for cells and/or growth factors. In the ideal case, scaffold absorb at a predefined rate so that the 3-dimensional space occupied by the initial scaffold is replaced by regenerated host tissue. (omitted)

• 한국재료학회지
• /
• 제22권10호
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.

• 정보학연구
• /
• 제5권4호
• /
• pp.1-8
• /
• 2002

본 연구는 저압 전력선에서의 데이터 통신에 적합한 변조 방식으로 주목받고 있는 다중 반송 변조의 일종인 OFDM(Orthogonal Frequency Division Multiplexing)의 변조를 실험하고, 이들 데이터를 전달 할 매체인 전력선을 채널 모델링 하였다. 전력선은 각종 전자기기에 의해 분기 연결되어 지연 전파의 경우와 임펄스성 잡음원이 존재하는 것으로 알려져 있다. 반송 주파수와 전력선의 길이에 의해 주파수 선택적 페이딩이 발생함을 알 수 있다.

• 정보학연구
• /
• 제6권2호
• /
• pp.1-8
• /
• 2003

본 연구는 최근 새로운 통신 방식으로 제안되고 있는 저압 전력선 통신에 대해서 검토한다. 저압 전력선 통신을 위한 지연, 감쇠, 주파수 선택적 페이딩의 특성을 갖는 전력선채널의 모델링과 함께 이 채널 특성에 다중 반송파 변조의 일종인 OFDM(Orthogonal Frequency Division Multiplexing)방식을 적용해 봄으로써 전력선 통신에 OFDM변조 방식이 적합한지 분석한다

• 멤브레인
• /
• 제29권5호
• /
• pp.246-251
• /
• 2019

올레핀/파라핀 분리를 위해 silver nanoparticle을 운반체로 이용하는 촉진수송막이 최근 많은 관심을 받고 있다. 기존 연구에서는 silver nanoparticle의 전구체로서 $AgBF_4$가 사용되어 왔다. 하지만 상대적으로 고가에 속하는 $AgBF_4$는 상업화에 적합하지 않기 때문에 비교적 저렴한 $AgClO_4$를 전구체로 이용해 제조된 silver nanopaticle를 활용해서 PEBAX-5513/AgNPs(전구체: $AgClO_4$)/7,7,8,8-tetracyanoquinodimethane (TCNQ) 복합막이 제조되었다. 그러나 여러 조성의 복합막이 제조되었으나 올레핀 분리성능은 관찰되지 않았다. FT-IR 분석 결과는 PEBAX-5513 고분자 내에서 silver nanoparticle이 형성되고 TCNQ에 의해 표면이 양극성화 되는 것을 확인하였지만 형성된 silver nanoparticle이 안정화 되지 못한 것으로 분석되었다. 이러한 결과들을 통해 은염 전구체의 음이온이 올레핀/파라핀 분리막에서 중요한 역할을 하는 것으로 판단되었다.

• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.207-212
• /
• 2024

Recently, with the strengthening of environmental regulations, there has been an increasing interest in eco-friendly energy sources, leading to a trend of the increasing scale of Cargo Containment Systems (CCS) for Liquefied Natural Gas (LNG) carriers. Among these systems, membrane tanks have gained popularity in LNG transport vessels due to their superior spatial utilization and competitiveness. However, due to high initial investment costs and the difficulty in repair in case of damage, a safety layer, the secondary barrier, must be installed without fail. In this study, in order to apply a new secondary barrier to the existing membrane-type LNG CCS, tests were conducted on the fiberglass layer previously used in the Triplex-Flexible Secondary Barrier (FSB), substituting it with basalt fiber. Tensile and vertical tensile tests were performed to assess the newly applied material. Environmental tests were conducted at room temperature (25℃) and extremely low temperatures (-170℃), considering the temperatures to which substances may be exposed during LNG vessel operations. The basalt-FSB produced in this study demonstrated superior results compared to the specifications of the existing product, confirming its potential applicability for implementation.

• 대한조선학회논문집
• /
• 제54권5호
• /
• pp.415-420
• /
• 2017

Insulation systems in Liquefied Natural Gas Carriers (LNGC) are vulnerable to sloshing impact and fatigue loads because of waves. If gas leaks into the primary barrier, the Flexible Secondary Barrier (FSB) prevents the leakage of gas in this system. Fatigue strength of the FSB largely depends on the behavior of composite materials. In this study, a new system is applied to the FSB using aramid fiber to improve the fatigue strength of the secondary barrier, with the intention of replacing conventional E-glass fibers. The manufacturing method involved varying the ratio of the aramid fiber to the E-glass fiber for optimum design of the FSB. The fatigue tests results of the secondary barrier using aramid fiber were superior to that using E-glass fiber. The statistical analysis is performed to obtain the fatigue test results and estimate the probability of failure as well as the design guideline of LNGC secondary barriers.

• 정보학연구
• /
• 제6권4호
• /
• pp.1-9
• /
• 2003

본 연구는 저압 전력선 망을 통한 전력선 통신(PLC: Power Line Communication)에 관한 내용이다. 전력선 통신이 가지는 주요 잇점은 기존의 인프라구조의 사용이다. 전력선 통신 채널은 전형적으로 전력선의 길이와 주파수가 증가함에 의해 신호 감쇠를 나타내는 주파수 선택적 페이딩(Frequency-Selective Fading)을 가지는 다중경로 반사 전파로 모델링 할 수 있다. OFDM(Orthogonal Frequency Division Multiplexing)은 다수개의 낮은 데이터 율의 반송파들이 높은 전송율을 이루는 형태로 송신기에서 조합되는 변조 기법이다. 모델링한 다중 경로 반사 전력선 채널에 음향 신호를 입력하여 체계의 성능을 모의 실험을 통해 분석, 검증하였다.

• 대한조선학회논문집
• /
• 제58권4호
• /
• pp.262-270
• /
• 2021

Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.

• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.168-174
• /
• 2020

Recently, the size of Liquified Natural Gas (LNG) carriers has been increasing, in turn increasing the load generated during operation. To handle this load, the thickness of LNG Cargo Containment Systems (CCSs) should be increased. Despite increasing the thickness of LNG CCSs, a secondary barrier is still used in conventional thickness. Therefore, the mechanical performance of the existing secondary barrier should be verified. In this study, tensile test of the secondary barrier was performed to evaluate mechanical properties under several low- and cryogenic-temperature conditions considering LNG environment, and in each fiber direction considering that the secondary barrier is composed of anisotropic composite materials depending on the glass fibers. Additionally, the coefficient of thermal expansion was measured by considering the degradation of the mechanical properties of the secondary barrier caused by the generated thermal stress during periodical unloading. As a result, the mechanical performance of secondary barrier in the Machine Direction (MD) was generally found to be superior than that in the Transverse Direction (TD) owing to the warp interlock structure of the glass fibers.